Bearing housing

F206 Bearing Housing for Remote Mower Cutter Shafts

The bearing housing carries the cutter shaft. Debris wound round the shaft and unbalanced blades are what wear it out.

Fits: MERI remote mowers. Confirm by machine nameplate model and part number.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI remote mower bearing assembly detail
Flange bearing housing on the cutter shaft.
46Common spare-part types stocked
48 hCommon parts dispatched
100+Countries exported
CECertified
ISO 9001Quality management
24 hReply time

Summary

Short answer

MERI-P22 is the F206 Bearing Housing. It is a priority-B service part. MERI suggests four per dealer location.

Keep the cutter shaft clean and the blades balanced. Both protect the bearing.

At a glance

Part numbers, fit and check points

Part numbers and names: MERI Spare Parts Catalog (MERI-P01 to MERI-P46). Stock priority and opening quantities: MERI Recommended Spare Parts Package, per dealer location. Check points: MERI operation and maintenance notes and the operator manual. Prices are quoted per order.
Part numberPart nameFitsDealer stockCheck points
MERI-P22F206 Bearing HousingConfirm by machine nameplate model and part numberPriority B (service part); suggested opening stock 4 pcsRemove wound debris from the cutter shaft after each use. Stop and report strong vibration.

Protect the bearing: points from MERI notes

After each use, remove rope, wire and debris wound on the blades and cutter shaft. Wound debris causes unbalanced running and wear.

Replace damaged blades at once. Lost balance causes strong vibration that loosens screws and parts.

If you notice unusual noise or vibration, turn the machine off and find the cause before restarting.

Before you ask for a quote

What to send MERI with your order

Machine model from the nameplate, for example ME1000D-48.

MERI part number (MERI-Pxx) and quantity.

A photo of the old part and, if you have it, the engine model and serial number.

Destination country and port, or courier address.

A photo of the housing on the shaft.

Questions

FAQ

What wears out the cutter shaft bearing?

MERI notes point to debris wound round the shaft and unbalanced blades. Both cause vibration and wear.

How many bearing housings should a dealer stock?

The MERI recommended package suggests 4 per dealer location.

Does the F206 housing fit all MERI mowers?

The catalog does not tie it to models. Send the nameplate model and a photo, and MERI will confirm.

The deck vibrates. Is it the bearing?

It could be the bearing or a damaged blade. Stop, inspect and report. See the deck vibration guide.

How fast does MERI ship these parts?

MERI dispatches its 46 common spare parts within 48 hours. Transit time depends on the destination and the shipping method you choose.

Keep reading

Related MERI pages

Spare parts quote or dealer stock advice

Send the models you support. MERI will confirm the bearing housing and suggest a starting stock.

Need this part? Send the part number from the MERI spare parts catalog, your machine model and the serial number from the nameplate. We confirm the right part and reply within 24 hours.