Remote control tracked slope mowers

Slope Mowers for Steep Banks, Hillsides and Embankments

Match the mower to the measured gradient, travel direction, surface, vegetation, access and daily workload—not to one headline number.

Short answer: A tracked slope mower is a remote control mower that drives on tracks, so the operator can stand clear while it cuts banks and hillsides. MERI’s 48 V tracked models cut 1,000 or 1,200 mm and handle up to 45° in specified configurations. Commercial crews choose tracks over wheels for grip on wet, uneven or soft slopes. Standard remote range is up to 800 m. See tracked vs wheeled slope mowers.

Up to 45°Specified configurations under suitable operating conditions
Up to 800 mStandard remote range; industrial 1,000 m option available
30–300 mmRemote cutting-height adjustment on the featured 48 V range
Tracked remote mower on a grassy slope
Grassy-bank application image; slope suitability is assessed using the selected model and site.

MERI · Commercial equipment selection

Remote Control Slope Mowers: Match the Bank to the Machine

For hillside, steep-bank and embankment work, choose a remote slope mower by its measured site and working system. Working width, ground grip, vegetation and the model-specific slope rating all affect the choice.

Choose around your working task

01

Read the slope as a worksite

Record the steepest gradient, cross-slope and up/down routes, wet areas, obstacles and a safe access/recovery route. A tracked slope mower still needs a controlled working zone.

02

Select the cutting finish

Flail and hammer choices cover rough grass and mixed vegetation on compatible standard models. Flat-blade turf models suit maintained grass. Fixed-tooth forestry clearing is a different category.

03

Check the complete working package

Compare engine, width, dimensions, machine weight and transport capacity. Keep rated limits separate from individual demonstrations; do not apply one model’s headline slope figure to every machine.

Configuration comes before price

Compare the working platforms

ModelWorking widthPower systemSlope referenceWorking taskMachine weight
ME800D-48800mmKOOP192, Diesel, 12HP45° model referenceGrass and mixed vegetation; flail/hammer choice for the specified model402kg
ME1000D-481000mmKOOP195, Diesel, 15HP45° model referenceGrass and mixed vegetation; flail/hammer choice for the specified model424kg
ME1200D-481200mmKOOP195, Diesel, 15HP45° model referenceGrass and mixed vegetation; flail/hammer choice for the specified model445kg
ME-RFM1000-E1000 mm72 V · 30 kWh battery / 9 kW cutter motor45° climbing / 35° rated workingDense brush and woody clearing with the forestry cutting head882 kg net

The electric forestry mulcher is a different cutting category from the standard mower. Its 45° climbing and 35° rated working references are separate; the recorded 55° field demonstrations are test observations. Select the head against vegetation, then check the route, travel direction and recovery access.

Factory support

Factory support for your working package

Use the selected model’s technical sheet and operating guide to plan loading, daily checks and wear parts. Send configuration and service needs with your enquiry.

Questions before you choose

Which widths should I compare for steep slopes?

The 800 mm class helps narrow-access planning; 1000 and 1200 mm classes increase working width where the route permits. Measure overall machine width as well as the cutting width.

Can a remote mower work on every steep hill?

No single machine fits every bank. Surface, travel direction, vegetation, access and operating conditions must be assessed with the relevant model rating.

Can I request a slope mower price without choosing a model?

Yes. Send the site measurements first; we will narrow the range and price a defined configuration rather than a generic slope-mowing claim.

Talk to MERI

Get a quote for the job you actually need to do

Maximum measured slope, travel direction, wet/loose ground, vegetation, route width, daily area and destination.

Send these details with site photos. We can narrow the machine and supply scope before preparing the quotation.

Related selection guides

Start with the worksite

Why ordinary mowing equipment becomes difficult on slopes

A remote control slope mower lets the operator choose a separate viewing position while a tracked machine works on banks, orchards, solar sites, roadside areas and uneven commercial ground.

Remote operation can improve visibility and distance the operator from the machine, but it does not remove the need for training, exclusion zones, protective equipment, site assessment and the exact model’s operating limits.

01

Traction changes quickly

Wet grass, loose soil, hidden holes and cross-slope travel can change stability even when the measured angle is unchanged.

02

Vegetation changes cutting load

Maintained grass, tall weeds and woody regrowth require different power, deck and blade decisions.

03

Access limits the machine

Gates, orchard rows, solar structures, trailer space and turning room must be measured before choosing width.

04

One rating is not a selection

Travel direction, surface, obstacles, workload and operator position must be considered together.

Slope mower types

Types of slope mowers compared

“Slope mower” covers several kinds of machine. The main difference is where the operator is while the machine works on the bank.

TypeWhere the operator isTypical workWhat to check
Remote control tracked slope mowerStanding clear of the machine, with the remoteSteep banks, embankments, solar sites, orchards, rough commercial groundRated slope, cutting width, access width, remote range
Ride-on slope mower or slope tractorSeated on the machineLarge, moderate slopes and parklandThe maker’s slope limit, rollover protection, operator exposure on the bank
Tractor or excavator arm flailIn the cab, beside the bankRoadside verges, ditches and hedges reached from the top or bottomArm reach, carrier access along the bank, traffic management
Walk-behind mower or brush cutterOn the slope, beside the machineSmall banks and spots other machines cannot reachFooting, operator fatigue, how much area one person can cover

MERI builds remote control tracked machines. For other types, check the maker’s own figures. See also tracked vs wheeled slope mowers.

Common applications

Different slope sites require different operating plans

Tracked remote mower cutting grass on a roadside slope

Roadside embankments

Banks, drainage areas and utility corridors where traffic, drop-offs and exclusion zones must be planned.

Rough vegetation on a steep hillside

Rough hillside vegetation

Tall grass, bracken and uneven ground where vegetation density and surface firmness affect selection.

Remote mower cutting a boundary through tall vegetation

Commercial rough ground

Estates, firebreaks and mixed vegetation requiring a controlled work zone and appropriate cutting system.

MERI tracked mower for commercial landscaping

Orchards, solar and estates

Sites where row width, structures, turning space, ground protection and daily area all matter.

MERI tracked remote control mower prepared for configuration checks

Tracked versus wheeled: tracks can provide a larger contact area on uneven ground, while wheeled equipment may suit firm, moderate terrain and simpler transport.

How the system helps

Tracked slope mower: drive, remote control and configuration

MERI tracked slope mowers combine a self-propelled chassis, cutting deck and radio controller. The correct configuration depends on the job—not engine type alone.

Tracked chassisFor traction-focused work on uneven commercial terrain.
Remote operationAllows the operator to select a clearer viewing position.
Gasoline or dieselChoose according to workload, service preference and project requirements.
Optional upgradesGPS/RTK, industrial remote control and selected engine options are configuration-dependent.

Six inputs before quotation

Measure the terrain before comparing models

Send measurements and working conditions instead of estimating the slope from a photograph alone.

Gradient and travel direction

Record the typical and steepest sections and whether the machine travels across, climbs, descends or turns on the incline.

Surface condition

Note wet grass, loose soil, stones, hidden holes, soft ground, edges, water and drop-offs.

Vegetation and finish

Describe grass, dense weeds or woody regrowth, cutting frequency and the desired result.

Access and turning space

Measure the narrowest gate, row or route, plus trailer space and room to turn safely.

Area and daily workload

Provide total area, expected operating hours and the available refuelling and service support.

Photos or site video

Show the terrain transitions, obstacles and representative vegetation—not only the easiest section.

How steep is steep?

Slope in degrees and percent

MERI remote mowers are rated to 45°, which is a 100% grade. Measure the steepest part of the bank, not the average. Wet grass, loose soil and cross-slope turns reduce grip well below the rating.

15°27%
20°36%
25°47%
30°58%
35°70%
40°84%
45°100%

Operating boundary

Plan the work zone and operator position

Remote control changes where the operator stands; it does not make slope mowing risk-free. Inspect people, animals, traffic, water, drop-offs, cables, debris and obstacles before cutting.

Important operating checks

Create an appropriate exclusion zone, keep a clear view of the machine and travel path, avoid standing directly below the machine, and follow the exact manual, local rules, protective equipment and emergency procedures. A site-specific risk assessment and trained operation remain essential.

Factory-backed support

Verify the configuration, documents and after-sales coverage

Warranty and parts

One-year warranty excluding wear parts, lifetime technical support and 46 replacement-part items supplied long-term at factory price; freight is additional.

Review Support & Parts

Certification scope

Documents are matched to the exact model, engine, configuration and destination market rather than treated as one universal certificate.

Review certifications and compliance

Factory and delivery evidence

Review real production, inspection, packing and loading evidence before confirming the final order configuration.

Review global delivery evidence

Slope mower FAQ

Questions buyers should settle before ordering

Is the maximum slope rating enough to choose a mower?

No. The rating must be considered with travel direction, turning, traction, surface condition, vegetation load, obstacles, access and the instructions for the exact configuration.

What information should I send before requesting a quotation?

Send measured gradients, travel direction, surface and vegetation details, total area, narrowest access width, photos or video, desired cutting result and expected daily workload.

Should I choose gasoline or diesel?

Choose according to workload, local servicing preference, operating environment and required power configuration. MERI can compare the relevant gasoline and diesel options after reviewing the site.

Can one slope mower cover every application?

Not necessarily. Orchard rows, solar arrays, embankments and rough commercial sites can require different widths, cutting systems, power options and operating plans.

Are GPS and RTK navigation available?

GPS automatic navigation and RTK high-precision positioning are optional configurations. Suitability depends on the worksite, required accuracy and project workflow.

Is an industrial remote control available?

Yes, an industrial remote-control upgrade can be configured for suitable projects, including an extended range of up to 1,000 m. Final specifications must be confirmed in the quotation.

How steep can a slope mower go?

MERI remote control slope mowers are rated to 45° (a 100% grade). The safe angle on your site depends on grip, travel direction and ground condition.

What is the best mower for steep banks?

For steep banks and embankments, a remote control tracked mower keeps the operator off the slope. Choose the width from the access route and the area to cut.

Is a slope tractor better than a remote slope mower?

A ride-on slope mower or tractor suits large, moderate slopes. On steep banks, a remote mower lets the operator stand clear of the machine. Check each maker’s slope limit.

Which diesel slope mowers come with parts support?

MERI offers the ME1000D-48 and ME1200D-48 diesel slope mowers with lifetime technical support and 46 replacement parts at factory price long-term. Diesel models are not supplied to the US market.

Get a terrain-based mower recommendation

Send the measured slope, travel direction, vegetation, total area, narrowest access point and representative site photos or video. MERI will narrow the relevant configurations before quotation.