Multi-Function Remote Control Tracked Machines

Compare MERI remote control tracked machines for mowing, rotary tillage, ditching, snow pushing and seasonal site work. Review the ME-RT platform, ME-RT PRO diesel rotary tiller and ME-RS snow blower, then confirm the suitable working attachments and configuration.

Dealer / Distributor Enquiries

ME-RT Series Remote Control Multi-Function Crawler Machine — Multi-Function Series remote control lawn mower, 800 mm cut
Multi-Function Series

ME-RT Series Remote Control Multi-Function Crawler Machine

Rotary TillageWeeding
800 mm CutUp to 45° SlopeApplication-dependent
View Details →
ME-RS remote-control snow blower with 600 / 800 / 1000 mm clearing-width options
Multi-Function Series

ME-RS Remote-Controlled Snow Blower

Commercial snow clearing; yards; access roads; industrial sites; facilities management
Clearing width: 600 / 800 / 1000 mmLifting system: Remote-controlledUp to 0.6 ha/h
View Details →
MERI ME-SB560 walk-behind snow blower, side view with engine and discharge chute
Multi-Function Series

ME-SB560 Walk-Behind Snow Blower

Driveways and other outdoor areas
560 mm snow clearing width Cut— Slope—
View Details →
MERI ME-RS600 tracked remote control snow blower, front three-quarter view
Multi-Function Series

ME-RS600 Remote Control Snow Blower

Remote snow blowing and optional snow sweeping
600 mm snow blowing width Cut35° maximum climbing angle Slope—
View Details →
ME-RT PRO diesel tracked rotary tiller shown with optional front flail mower
Multi-Function Series

ME-RT PRO Diesel Remote Control Multi-Function Rotary Tiller

Rotary TillageOrchard Soil Cultivation
900 mm Tillage13 kW Diesel4 included + 3 optional
View Details →

Compare the multi-function models

Use these model-specific figures to compare the standard machines in this family. Engine output, electrical drive power and cutting width describe different parts of the machine. Keep those distinctions visible when planning access, transport and the working package.

ModelEnginePower (published basis)Working widthCutting toolsHeight / working depthPublished weight (basis)Machine size
ME-RSLoncin gasoline engine16 hp max600 / 800 / 1000 mmAuger; count not listed30–600 mm clearing depth390 kg operating1800 × 1000 × 850 mm
ME-RT SeriesKOOP 195 single-cylinder diesel, 15 hp15 hp800 mm24 rotary130–250 mm tilling depth390 kg, excluding tools1800 × 750 × 700 mm
ME-RT PRO1100F diesel13 kW rated900 mm tillage24 rotary; optional flail 48130–250 mm tilling depth500 kg machine1780 × 920 × 740 mm

Technical data sheets: ME-RT standard TDS · ME-RT PRO TDS · ME-RS TDS

Match the tool system to the task

ME-RT and ME-RT PRO are agricultural multi-function platforms; ME-RS is a dedicated snow blower. Their working-width figures describe different jobs. An 800 mm tillage tool, a 900 mm rotary-tillage setup and a snow-clearing head should not be compared as though they deliver the same operation.

The confirmed standard ME-RT configuration is KOOP 195 diesel, 15 hp and 800 mm working width. ME-RT PRO lists 13 kW diesel power, 900 mm tillage width, hydraulic lift and four included working functions. Its front flail mower, fertilizer spreader and snow plow are optional upgrades. ME-RS lists gasoline power and 600, 800 or 1000 mm snow-clearing width options.

Typical sites and recorded demonstrations

For orchard soil work, send row spacing, tree-root and irrigation positions, soil conditions and the intended cultivation depth. For ditching or backfilling, describe the required trench and the material that must be moved. For snow clearing, measure the complete route, turning area, storage access and where snow can be discharged. Match the carrier and installed tool together; a working-width number alone does not establish full machine clearance or suitability near established roots.

ME-RT Series recorded working demonstration; check the listed tool configuration.
ME-RT Series recorded working demonstration; check the listed tool configuration.
ME-RT PRO recorded working demonstration; check the listed tool configuration.
ME-RT PRO recorded working demonstration; check the listed tool configuration.

Configuration, delivery and spare-parts questions

Which model should I shortlist?

Start with the narrowest access point, the required finish and the daily route. Send representative vegetation or soil photos, measured slopes, gate width, turning space and transport limits. MERI can compare the relevant model sheets with that job instead of selecting from engine power alone.

What configuration will be delivered?

Use the signed quotation and model-specific technical sheet to record the engine, travel system, cutting or working tools, adjustment method, controller and included items. List optional upgrades separately so the photographs and demonstration do not silently become the order specification.

How should I plan spare parts and service?

Identify the exact machine and installed tool set before building a starter-parts order. Keep model-matched wear parts, maintenance instructions and a clear support contact. Ask MERI for compatible part identification and the service documents relevant to the configuration; do not assume that similar-looking parts are interchangeable.

Bring the model sheet, site evidence and transport plan into one quotation request. Confirm the included tools, documentation, packing and destination requirements in writing. That gives purchasing, the operator and the service team the same working reference.

Send your site details for a model comparison →

Choosing a Multi-Function Series Model

Start with the task and working attachment: ME-RT is the 15 hp KOOP 195 diesel crawler with an 800 mm working width and four standard tool sets for rotary tillage, weeding, ditching and backfilling; ME-RT PRO is the 13 kW diesel rotary tiller with four included working functions and three optional attachment upgrades; ME-RS is the auger snow blower with 600, 800 or 1,000 mm clearing-width options.

Compare the relevant working width, power and control configuration, attachment, and site access on each model page. Check the model TDS and confirm the exact configuration with MERI before ordering.

Use each model page to review its technical data sheet, standard applications and enquiry options.