800 mm for access planning
Compare the ME800 gasoline 24 V and 48 V models when access and turning space control the purchase. Both belong to the flail/hammer-compatible standard range.
Gasoline mower range
Gasoline Remote Control Mowers for Slopes and Commercial Land
Compare MERI 24V and 48V tracked gasoline mowers for contractors, farms, roadsides, solar sites and demanding vegetation work.
MERI · Commercial equipment selection
Gasoline Remote Control Lawn Mowers: Width, Drive and Cutting Choice
Gas, gasoline and petrol remote control mowers use a combustion engine for cutting power with electric track travel. Compare the working platform and local service preference rather than treating electric travel as battery-electric mowing.
Choose around your working task
1000 and 1200 mm for wider routes
The 1000 mm and 1200 mm classes provide broader cutting widths where the site and transport route permit. Reference output is 5000 and 6000 m²/h respectively for these standard classes.
Options that change the package
Manual adjustment is standard in the 12 non-T mower matrix. Electric/hydraulic adjustment and front/rear snow plow options must be selected for the compatible model; T-Series rules differ.
Configuration comes before price
Compare the working platforms
| Model | Working width | Cutting power | Overall dimensions | Machine weight |
|---|---|---|---|---|
| ME800-24 | 800mm | LONCIN459, Gasoline, 18HP | 1650×950×920mm | 355kg |
| ME1000-24 | 1000mm | LONCIN459, Gasoline, 18HP | 1650×1150×920mm | 376kg |
| ME1000-48 | 1000mm | LONCIN459, Gasoline, 18HP | 1750×1150×920mm | 424kg |
| ME1200-48 | 1200mm | LONCIN459, Gasoline, 18HP | 1750×1350×920mm | 445kg |
Standard ME800 / ME1000 / ME1200 reference outputs: 4000 / 5000 / 6000 m²/h for the 12 gasoline/diesel non-T models. Plan work using the actual vegetation, ground and route. T-Series output is assessed separately. Overall machine width is different from cutting width.
ME1000-24
1000mm · LONCIN459, Gasoline, 18HP
View model & configuration →Download technical sheet (PDF)
ME1000-48
1000mm · LONCIN459, Gasoline, 18HP
View model & configuration →Download technical sheet (PDF)
ME1200-48
1200mm · LONCIN459, Gasoline, 18HP
View model & configuration →Download technical sheet (PDF)Factory support
Factory support for your working package
Use the selected model’s technical sheet and operating guide to plan loading, daily checks and wear parts. Send configuration and service needs with your enquiry.
Questions before you choose
Is a gasoline remote control mower purely electric?
No. The gasoline engine supplies the cutting system; electric motors drive the tracks.
Can I choose different engine brands?
Current gasoline examples on this page use Loncin engines. The ME1000/ME1200 configuration matrix includes model-specific alternatives. Identify the compatible engine and fuel type in the written order specification; KOOP diesel examples belong to the diesel range.
How do I receive a petrol mower quotation?
Choose a model or send your row/gate width, vegetation and daily work. Include the adjustment, blade and transport requirements for an itemised package.
Talk to MERI
Get a quote for the job you actually need to do
Working width, minimum access, grass/brush photos, daily workload, engine service preference and destination.
Send these details with site photos. We can narrow the machine and supply scope before preparing the quotation.
Related selection guides
Which gasoline remote mower fits your work?
Choose the cutting width first, then match the drive voltage and configuration to terrain, workload and budget. The 800mm models suit tighter access; 1,000mm balances access and output; 1,200mm prioritizes area coverage.
459cc / 18HPCurrent standard Loncin gasoline engine
800–1,200mmThree cutting-width classes
24V or 48VTracked electric-drive choices
Up to 800mStandard remote-control range
Model selector
Compare gasoline mower models
Six models cover three widths and two tracked-drive platforms. All current gasoline models use the Loncin 459cc 18HP engine; project-specific engine and control upgrades can be discussed.
ME800-24
Compact 800mm gasoline model for tighter access and value-focused commercial work.
800mm cutting width24V · 1,800W drive30–300mm heightUp to 5km/h
ME1000-48
Balanced 1,000mm model with 48V dual-motor tracked drive for demanding projects.
1,000mm cutting width48V · 2×1,000W30–300mm heightUp to 800m
ME1200-48
Wide 1,200mm configuration for higher-output commercial vegetation management.
1,200mm cutting width48V · 2×1,000W459cc · 18HPOptional remote height control
| Specification | 24V Gasoline Series | 48V Gasoline Series |
|---|---|---|
| Models | ME800-24 / ME1000-24 / ME1200-24 | ME800-48 / ME1000-48 / ME1200-48 |
| Cutting widths | 800 / 1,000 / 1,200mm | 800 / 1,000 / 1,200mm |
| Standard engine | Loncin 459cc gasoline · up to 18HP | Loncin 459cc gasoline · up to 18HP |
| Tracked-drive voltage | 24V system | 48V upgraded system |
| Total drive-motor power | 1,800W total | 2,000W total · 2 × 1,000W |
| Generator output | 24V · 2,000W | 48V · 2,300W |
| Controller & electrical system | 24V-matched controller and electrical architecture | Upgraded 48V controller and higher-voltage electrical architecture |
| Chassis structure | Standard commercial tracked chassis | Reinforced chassis structure for the 48V platform |
| Cutting height | 30–300mm · manual adjustment standard; remote optional | 30–300mm · manual adjustment standard; remote optional |
| Travel speed | Up to 5km/h | Up to 5km/h |
| Remote-control range | Up to 800m standard; industrial system up to 1,000m optional | Up to 800m standard; industrial system up to 1,000m optional |
| Best fit | Value-focused commercial work and regular duty cycles | Higher-duty projects requiring upgraded drive, charging and chassis systems |
Highlighted rows show the main 24V/48V differences. Final specifications and optional upgrades are confirmed in the quotation and model TDS.
Why choose gasoline power?
Gasoline models combine straightforward operation with multiple width and drive choices.
Fast model selection
Choose width and voltage without changing the core operating concept.
Optional remote cutting-height control
Optional electric or hydraulic adjustment changes cutting height from the remote control for changing vegetation; manual adjustment is standard.
Flexible customization
Logo, colour, engine, controller, blades and navigation options can be discussed.
Industrial remote option
Standard range is up to 800m; an industrial system can extend to up to 1,000m.
Roadside slopesKeep the operator away from moving blades and difficult ground.
Orchards and vineyardsTracked travel and multiple widths support different row layouts.
Solar farmsWork between rows and under structures where access allows.
Commercial landscapingSuitable for contractors managing mixed sites.
Municipal landA practical option for embankments and public vegetation work.
Rough grassFlail and hammer options support different cutting requirements.
Factory-backed ownership
Built for commercial buyers, dealers and contractors
MERI supports OEM/ODM requirements, model selection and after-sales service for international projects.
1-year warranty
Warranty coverage excludes wearing parts.
Lifetime support
Long-term technical after-sales assistance.
46 replacement parts
Long-term factory-price parts supply; freight is additional.
100+ markets
International customer and shipment reach.
Frequently asked questions
What is the current gasoline engine specification?
The current standard engine for these six models is the Loncin 459cc gasoline engine rated at up to 18HP.
Should I choose 24V or 48V?
24V is the value-focused choice; 48V provides a higher-output tracked drive. Final selection should consider slope, vegetation, daily hours and budget.
Do you publish prices online?
No. Pricing depends on model, configuration, quantity and destination. Request a quotation for an exact offer.
Can the mower be customized?
OEM/ODM options may include branding, colour, engine, controller, blade system and optional navigation, subject to technical confirmation.
Get the right gasoline mower configuration
Tell us your terrain, vegetation, working area, preferred power system and destination. We will recommend a suitable model and provide a configuration-based quotation.