
This field-test record helps commercial buyers evaluate a ME-RCS100-B demonstration without turning one video into a universal performance promise. It identifies the machine, task, visible evidence and limits, then lists the site data required before configuration.
What the test shows
The MERI video shows an ME-RCS100-B 100 L boom configuration travelling between low crops while multiple nozzles apply spray across the boom width.

Test identity
| Record | Verified information |
|---|---|
| Machine | ME-RCS100-B |
| Power/platform | tracked remote-control sprayer |
| Demonstrated task | boom spraying across low vegetable crops |
| Primary evidence | MERI public video ID Ga_198sIW0I |
| Evidence boundary | Visible conditions and results in this recording only |
Observed working sequence
The boom-sprayer field record is useful when planning a controlled swath through low or evenly arranged crops. Review the crop geometry and travel route shown by the published source. Visible spraying is not evidence that a particular crop-protection program or application rate is correct.
What the video does not prove
Visual spray distribution is evidence of the demonstration, not proof of chemical dose, deposition or efficacy. Nozzle, pressure, speed, calibration, label and local rules remain site-specific.
How to compare your site
Provide crop height, row spacing, bed layout, gate width and headland access. Describe the required swath from the approved treatment plan and identify boundaries requiring special attention. Record refill access separately from the area of the field.
Configuration questions
- Confirm the exact machine and working-system configuration.
- Measure access, transport route and recovery route.
- Describe the material or crop, ground and environmental conditions.
- State the required result, frequency and daily work window.
- Check the current product page, TDS and final quotation together.
Use the record in an acceptance review
Calibration should establish the appropriate settings for the crop and approved program before treatment. Record uniformity, travel continuity, refill stops and the completed route using that procedure. This video remains a product demonstration, not a field-efficacy trial.
Operational controls
Complete a site risk assessment and follow the delivered instructions, applicable local rules and task-specific controls. Establish exclusion zones, operator position, communication, stop procedure and recovery method before work.
Evidence to request before ordering
Confirm the boom arrangement, pump and nozzles for the required task rather than choosing by tank size alone. The buyer’s approved spray program supplies the application requirements. The quotation should identify the compatible sprayer configuration and relevant operation documents.
Related MERI resources
Buyer FAQ
Is the video a guaranteed production rate?
No. It documents the visible demonstration only. Output changes with configuration, material, terrain, weather and operating method.
Can the site be selected from a video alone?
No. Send measurements and representative media for the intended site and verify the current product documents.
Does this page change the TDS rating?
No. The current TDS and final ordered specification remain the technical references.
Compare your site with this test
Send measured site conditions, the required task and work-cycle expectations for a configuration review.
Need a agricultural sprayer recommendation for your terrain or project?
Get a Quote