Forestry Mulcher

ME-RFM1000-E Remote Control Forestry Mulcher

ME-RFM1000-E is a battery-electric 1000 mm remote control forestry mulcher with a 30 kWh LiFePO4 system and 9 kW water-cooled cutter motor. The TDS lists approximately 7 h operation; work time depends on cutting load, terrain and conditions. Plan fast or standard charging for the site.

Dense brush clearingForest understory managementLow-emission work sitesLand reclamation

Technical Specifications

Power system72 V, 430 Ah, 30 kWh LiFePO4 battery system
Working width1000 mm
Rated power9000 W water-cooled cutter motor
Maximum slope45° climbing / 35° working angle
Remote control range200 m
Travel speed1 m/s
Net weight882 kg net
Machine dimensions2080 × 1250 × 640 mm

ME-RFM1000-E recorded working test

Watch the matched MERI recording alongside the technical specifications. The video shows this identified machine and its recorded conditions; the supplied configuration remains the one confirmed in the quotation and model sheet.

Built for demanding sites

Key Features

72 V 430 Ah LiFePO4 battery system

9000 W water-cooled cutter motor

1000 mm fixed-tooth mulching head

Approximately 7 hours working time

Approximately 6 h fast or 12 h standard charging

200 m remote control range

Match the mulcher to your vegetation and terrain

Share your vegetation type, slope, access width and preferred power system. MERI will confirm the suitable configuration and shipping details.

Discuss Your Project

Plan your order · ME-RFM1000-E

From machine selection to a complete working package

Bring together the configuration, site requirements and delivery plan before requesting your quotation.

Confirm the electric working package

The model TDS describes the battery-electric forestry system. Identify the ordered cutting head, tools, charger and any alternative flail assembly in the equipment list. Confirm site electrical supply and charger requirements with MERI before delivery.

Read the official ME-RFM1000-E TDS

Plan the work and charging cycle

Send vegetation and route measurements, daily working hours and charging access. The TDS lists 45° gradeability and 35° maximum operating angle separately; use the working-angle figure when reviewing the mowing task.

Plan electric mulcher charging

Agree the delivery and support scope

State the destination, quantity, unloading equipment and local service plan. Request the final packing list, acceptance checks, spare-parts package and written commercial terms for the selected configuration.

Packaging and loading checklistFactory acceptance review
MERI ME-RFM1000-E on the vegetation slope in the recorded railway test

Recorded MERI demonstration

ME-RFM1000-E railway-slope test record

This record identifies the electric model and its demonstrated configuration. The reported slope test is separate from the product TDS ratings; review both when planning your site.

Read the demonstration record

See the ME-RFM1000-E on a live video call from our factory: start-up, remote control, mulching head, safety stops and build quality.

Frequently asked questions

What is the ME-RFM1000-E used for?

It is a battery-electric remote-controlled forestry mulcher with a 1000 mm working width, for clearing where fuel, noise or exhaust is a concern — near homes, railways or sensitive sites.

What battery and motor does it use?

A 72 V, 430 Ah, 30 kWh LiFePO4 battery system and a 9,000 W water-cooled cutter motor.

What slope can it handle?

Its technical sheet lists 45° maximum climbing and 35° maximum working angle — plan cutting work within 35°.

What is its remote range and speed?

Remote control range is 200 m and travel speed is 1 m/s.

How heavy is it, and how should I plan charging?

882 kg net, dimensions 2080 × 1250 × 640 mm. Plan charging around your daily working hours; tell us your shift pattern and we will advise. We reply within 24 hours.