Tracked airblast sprayer moving between orchard tree rows
Orchard airblast sprayer working view. Compare canopy coverage, row access and refill logistics.

MERI · Commercial equipment selection

Remote Control Orchard Sprayers: Choose Airblast, Access and Capacity

Choose a tracked orchard sprayer around canopy coverage, row width and the refill route. An airblast configuration serves the canopy task, while a boom arrangement is planned differently for low row crops.

Choose around your working task

01

Canopy and spray delivery

Record tree height, canopy density, row structure and the intended application. Separate maximum reach figures from uniform deposition and the actual nozzle/fan setup.

02

Access before tank volume

Check chassis and full machine dimensions against rows and turning areas. RCS800 photographs and dimensions must not stand in for the smaller platforms.

03

Plan tank and refill together

Capacity depends on work duration, application requirements and water/refill convenience. Do not choose one tank size solely from land area.

Configuration comes before price

Compare tank and chassis classes

Capacity classTank volumeChassis widthRemote rangeConfiguration
ME-RCS100100 L400 mm200 mBoom -B / Airblast -A
ME-RCS120120 L520 mm200 mBoom -B / Airblast -A
ME-RCS200200 L700 mm200 mBoom -B / Airblast -A
ME-RCS300300 L900 mm200 mBoom -B / Airblast -A
ME-RCS400400 L960 mm200 mBoom -B / Airblast -A
ME-RCS500500 L980 mm200 mBoom -B / Airblast -A
ME-RCS800800 L1100 mm200 mBoom -B / Airblast -A

Chassis width is not ground clearance or the full implement envelope. Confirm the full configured machine dimensions, turning space and nozzle/fan arrangement for your crop. Seven capacities; no 600 L model is listed.

Factory support

Factory support for your working package

Use the selected model’s technical sheet and operating guide to plan loading, daily checks and wear parts. Send configuration and service needs with your enquiry.

Questions before you choose

Which tracked airblast sprayer fits an orchard?

Use the row/canopy brief to compare the seven public RCS capacities and their confirmed chassis widths, then confirm the actual spraying configuration.

Are there separate boom and airblast configurations?

Yes. -B denotes the boom configuration and -A the airblast configuration after capacity and supply scope are agreed.

Can I buy a smaller sprayer with an RCS800 layout?

No. Match the model, chassis and photographs to the actual capacity/platform.

Talk to MERI

Get a quote for the job you actually need to do

Canopy/row photos, tree height, row/gate width, turning areas, terrain, working hours, refill route and application requirements.

Send these details with site photos. We can narrow the machine and supply scope before preparing the quotation.

Related selection guides

Detailed planning guide and further reading

Choosing a remote control agricultural sprayer starts with the crop and the space between the rows—not with tank capacity alone. A machine that fits an open orchard may be too wide for vegetable beds, while a compact boom sprayer may not deliver the canopy penetration an orchard needs.

The right choice depends on five practical factors: crop type, row spacing, turning room, canopy structure, and refill access. This guide shows how to match those conditions to the MERI ME-RCS remote control agricultural sprayer range.

Remote Sprayer Selection Summary

  • Narrow vegetable rows: begin with the compact 100 L ME-RCS100-B, then match boom height, width, and nozzle count to the crop.
  • Orchards and vineyards: choose an airblast (-A) configuration to move spray into raised and denser canopies.
  • Many orchards below roughly 100 mu: use 120–400 L as a practical starting range, then refine it around access and refill distance.
  • Larger sites and longer cycles: consider 500 or 800 L only when row width, turning room, ground, and transport can support the larger platform.
  • Every ME-RCS model: the current range lists 100–200+ m (indicative) for ME-RCS100 to ME-RCS500 and up to 500 m for the ME-RCS800.

Start With the Crop, Then Follow the Decision Path

1

Identify the spray target

Low, even vegetable beds point toward a boom. Raised, layered orchard foliage points toward airblast.

2

Measure the tightest space

Use the narrowest clear row, gate, branch clearance, and headland—not the average width.

3

Plan the refill cycle

Balance tank capacity against access, liquid demand, refill distance, and the time available for each spray cycle.

Boom vs Airblast: Make This Choice First

Boom configuration (-B)

Best starting point for: vegetables, seedlings, greenhouses, nurseries, and other low, relatively even crops.

The boom distributes spray horizontally across the bed or row. In narrow vegetable layouts, the compact ME-RCS100 is usually the first model to evaluate because larger equipment may simply not fit.

Custom options: boom height, boom width, and nozzle quantity can be matched to the planting layout.

Airblast configuration (-A)

Best starting point for: orchards, vineyards, and crops with raised or denser foliage.

A fan carries droplets into the canopy, which makes airblast more suitable than a low horizontal boom for tree rows.

Define before selection: canopy height and density, row width, branch clearance, and turning space.

MERI tracked airblast sprayer for orchard applications
The airblast configuration is built around orchard and vineyard canopy coverage.

Measure the Row Before Selecting the Model

Nominal tank capacity tells only part of the story. Overall machine width and turning space determine whether the sprayer can actually work in the field. Measure the narrowest usable gap and allow clearance for plants, irrigation lines, posts, low branches, and steering corrections.

ModelTank capacityChassis widthPractical starting point
ME-RCS100100 L400 mmNarrow vegetable rows
ME-RCS120120 L520 mmNarrow access and short cycles
ME-RCS200200 L700 mmCompact-capacity balance
ME-RCS300300 L900 mmMid-range balance
ME-RCS400400 L960 mmWider rows and longer cycles
ME-RCS500500 L980 mmLarger sites where access permits
ME-RCS800800 L1100 mmLonger cycles on suitable sites

A machine that fits between rows may still lack room to turn. Check the aisle end, loading route, transport width, and the softest ground the machine must cross.

Match Tank Size to the Refill Cycle

For narrow vegetable production, the 100 L ME-RCS100 is the practical first model to evaluate. It prioritizes access where wider equipment cannot enter.

For orchards below roughly 100 mu, MERI commonly begins the selection discussion within the 120–400 L range. Treat that as a practical starting band rather than an automatic area guarantee:

120 L

Choose this direction when access is tight, spray cycles are shorter, and refilling is easy.

200–300 L

A useful middle ground between compact dimensions and fewer refill stops.

400 L

Stronger fit for wider rows, longer working periods, inconvenient refill points, or larger and denser canopies.

For larger sites or longer planned spray cycles, the 500 L and 800 L models provide additional capacity. Bigger only creates value when the row width, ground condition, turning room, transport method, and refill plan support it.

Check Weight, Speed, and Access as One System

Tank capacity should never be evaluated alone. The ME-RCS range spans from a 150 kg ME-RCS100 to heavier mid-size platforms such as the 420 kg ME-RCS400 and 465 kg ME-RCS500. Travel speed is listed at 80 m/min for the 100, 120, and 200 L models; 60–80 m/min for the 300, 400, and 500 L models; and 100–133 m/min for the 800 L model.

These figures help compare platforms, but they do not predict hectares or mu sprayed per hour. Real productivity changes with spray volume, nozzle setup, crop density, turning frequency, refill time, terrain, and operating speed.

Specify the Sprayer Around the Crop

Standard specifications are a starting point. MERI supports customization of boom height, boom width, nozzle quantity, chassis width, and engine model.

Boom sprayer nozzle detail on a MERI tracked sprayer
Boom height, width, and nozzle arrangement can be discussed around the crop and row layout.

Pre-Purchase Checklist

  1. Crop and growth stage: describe what will be sprayed and how the target changes through the season.
  2. Narrowest clear row: include irrigation lines, posts, branches, gates, and steering clearance.
  3. Canopy structure: for orchards, provide height, density, and the area that must receive coverage.
  4. Terrain and surface: note slope, soft ground, ruts, stones, and turning conditions.
  5. Liquid and refill plan: define desired volume, refill location, and acceptable cycle length.
  6. Transport and access: confirm gate width, loading method, vehicle limits, and headland space.
  7. Configuration: state boom or airblast and any required boom, chassis, nozzle, or engine customization.
  8. Local operating rules: check the requirements that apply to spraying equipment and chemical use.

Frequently Asked Questions

Which remote control sprayer is the best starting point for narrow vegetable rows?

The 100 L ME-RCS100-B is the practical first model to evaluate because its 400 mm chassis is the narrowest in the current range. Final boom dimensions and nozzle layout should be matched to the crop.

Should an orchard use a boom or an airblast sprayer?

Airblast is the correct starting point for orchards and vineyards because the fan moves droplets into raised and denser foliage. Confirm canopy height, density, row width, and branch clearance before selecting capacity.

Is 120–400 L suitable for every orchard below 100 mu?

No single tank range guarantees suitability by area alone. The 120–400 L range is a practical starting point for many orchards below roughly 100 mu, then access, canopy, refill distance, and cycle length refine the decision.

When should a buyer consider the 500 L or 800 L models?

Consider them when the site needs longer spray cycles and can support the wider, larger platform. Row width, turning space, ground condition, transport, and refill planning all need to work together.

Choose the Sprayer That Fits the Field

Send MERI your crop type, narrowest row spacing, canopy dimensions, terrain, refill plan, and preferred configuration. The clearer the site brief, the faster the model and customization discussion becomes.