Nut orchards

Remote Control Mowers for Nut Orchards: Hazelnut, Almond, Walnut and Macadamia

Nuts are picked up from the ground, so the orchard floor must be short and even before harvest. A remote mower cuts rows and slopes while one operator watches from the headland.

Recommended: ME800-48 for tree rows · ME800D-48 for diesel fleets · ME1000D-48 for wide rows and headlands.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI tracked remote mower cutting grass in an orchard
MERI tracked mower working in an orchard
100+Countries exported
CECertified
ISO 9001Quality management
24 hReply time

Site conditions

What makes this site hard to mow

The floor must be cut short and even just before harvest, often in a narrow window.

Hazelnut orchards are often on steep hillsides; tractors are risky there.

Low skirts and suckers around trunks limit access.

Dry grass under trees is a fire risk in summer.

Model choice

Recommended configuration

Hazelnut on hillsides → ME800-48

800 mm flail, 950 mm wide overall, rated for 45°.

Almond and walnut rows → ME800D-48

Diesel 800 mm flail for long rows and dusty summer work.

Wide rows and headlands → ME1000D-48

1000 mm flail, 5,000 m²/h on open ground.

Macadamia on wet slopes → ME800D-48

Tracks spread the 402 kg load on soft ground in the rainy season.

At a glance

Specifications to compare

Source: MERI product pages and model technical data sheets (TDS). Work rates are rated figures on open ground.
SpecificationME800-48ME800D-48ME1000D-48
Cutting system800 mm flail, 30 blades800 mm flail, 30 blades1000 mm flail, 40 blades
Overall size (L × W × H)1750 × 950 × 920 mm1750 × 950 × 920 mm1750 × 1150 × 920 mm
Weight402 kg402 kg424 kg
EngineLONCIN459 gasoline, 18 HPKOOP192 diesel, 12 HPKOOP195 diesel, 15 HP
Cutting height30–300 mm30–300 mm30–300 mm
Rated work rate4,000 m²/h4,000 m²/h5,000 m²/h
Working slope45°45°45°
Remote range800 m (1,000 m with R1 remote)800 m (1,000 m with R1 remote)800 m (1,000 m with R1 remote)

Field evidence

Real machines and field footage

Red MERI tracked mower on grass between trees on a sloping orchard
MERI mower on grass between trees on a sloping orchard.
Red MERI tracked mower cutting grass beneath orchard trees
▶ Watch in the MERI video library: Remote control mower working in an orchard. Real MERI orchard footage.

Plan the pre-harvest cut

Agree the last cut date with your orchard manager so the floor is settled at harvest.

Set a low, even cutting height. Flail decks adjust from 30 to 300 mm.

Cut along the rows, then clean the headlands.

Check blades before the season; worn flails leave an uneven floor.

Questions

FAQ

Why mow nut orchards before harvest?

Most nuts are picked up from the ground. A short, even floor makes harvesting cleaner and faster.

Can the mower work on steep hazelnut slopes?

Yes. MERI mowers are rated for 45° working slopes. The operator stays on the headland with the remote.

Which model suits almond and walnut rows?

The ME800D-48 for most rows; the ME1000D-48 where rows are wide.

Can it cut near trunks?

It cuts close, but keep a safe line from trunks and irrigation lines. Finish around trunks by hand if needed.

How many blades should we stock?

The ME800 uses 30 flail blades. Keep at least one full set per machine for the season.

Keep reading

Related MERI pages

Get a configuration for your nut orchard

Send row width, slope, area and harvest timing. We reply within 24 hours.