MERI video · Factory and field evidence
ME-RCS100-B Factory Boom Spray Test
Follow the tracked sprayer and horizontal boom through the factory-yard spray-test sequence.
Request equipment and dealer informationWhat this video shows
The MERI recording shows a compact RCS100-B tracked sprayer with a horizontal boom spraying in a paved factory yard. The front and side views show the boom extending across the carrier and the visible spray below it. This is a factory equipment demonstration, not footage of the machine treating a sugarcane field.
Key moments to watch
0:00 · Start with the front view
The machine faces the camera in the paved test area, with the horizontal boom extending to each side. Spray is visible around the ground beneath the assembly.
0:04 · Follow the carrier and boom
The next view keeps the tracked platform and boom in the same scene. Observe the relationship between the carrier path and the working assembly.
0:10 · Compare the side angle
The side view shows the red tank and the extended spray assembly. The later sequence continues the demonstration from another position in the factory yard.
Visible boom-test layout and current RCS100 references
| Visible detail or reference | What to review | Order information |
|---|---|---|
| Spray assembly | A horizontal boom extends across the compact carrier. | Confirm boom dimensions, nozzle arrangement and transport envelope. |
| Tank class | The current RCS100 capacity class is listed at 100 L. | Compare the intended work cycle with refill access. |
| Chassis-width reference | The current RCS100 chassis width is listed as 400 mm. | Measure the full configured machine separately from chassis width. |
| Test setting | The sequence takes place on a paved factory area. | Define the site and measured checks needed for your application. |
Use the front and side views to review the boom
The front view makes the relationship between the carrier and horizontal boom easy to see. The side view adds the tank position and the depth of the assembled machine. Together, these angles are useful when identifying which dimensions and components should appear in a proposed equipment list.
Send the video reference with the crop layout, row spacing and intended working passage. Ask for the proposed boom dimensions, nozzle arrangement and the complete transport dimensions. The published chassis width is a separate specification; it does not describe the total outside span of an extended boom.
Keep a visual spray test separate from calibration
Visible spray shows the equipment operating in the test sequence. To compare distribution across a working swath, the test record needs the installed nozzle identification, spacing, height and the relevant measured settings. Those details are not established simply by watching mist over a paved surface.
The nozzle-spacing guide below explains how to identify the actual hardware before reviewing a pattern. The calibration-records checklist shows how to keep machine identity, nozzle arrangement and raw test readings together. Use those resources to request a test record that can be matched to the configuration you are ordering.
Plan the equipment around the real crop route
The source title refers to a custom build for sugarcane seedlings, while the visible recording shows factory-yard testing. This page follows the setting on screen. For your own crop, provide photographs of the rows, canopy height, entrances and turning points rather than treating a factory pass as evidence of a particular field result.
The current RCS series page lists the RCS100 capacity class at 100 L with a 400 mm chassis-width reference. Discuss those figures alongside the proposed boom and actual access requirements. Include the application requirements, refill arrangements, quantity and destination when requesting a model-specific quotation.
Frequently asked questions
Does the recording show work in a sugarcane field?
The visible sequence shows the sprayer operating in a paved factory test area. No sugarcane field application is shown.
What spray layout is visible?
The compact tracked carrier has a horizontal boom extending to each side, with visible spray during the factory-yard sequence.
Does visible spray prove a uniform application rate?
No measured distribution or application-rate record is shown. Request nozzle identification, setup details and the readings needed for the agreed calibration check.
Discuss the configuration with MERI
Send crop and row details, required boom layout, narrowest access, refill conditions, quantity and destination. Ask MERI to identify the configuration and factory-test records proposed for your application.
Get a model-specific quotation