Selection guide
Compact MERI Machines for Narrow Gates and Light Trailers
Many sites are easy to mow but hard to reach: a garden gate, a footpath bollard, a narrow bridge or a small trailer. This page ranks MERI machines by overall width and weight, using the figures on each product page, so you can shortlist the ones that will get to the work.
Best fit: contractors and dealers who need to know which MERI machines pass a given gate or fit a given trailer before quoting a job.
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Summary
Short answer
For mowing, the 800 mm flail mowers are 950 mm wide overall and the ME550-T is 1000 mm wide. ME650-T is wider than ME550-T; confirm its dimensions with MERI. The ME550-T is also the lightest MERI mower at 160 kg.
Cutting width is not machine width. The ME900-T cuts 900 mm but is 1300 mm wide; the ME1000 models cut 1000 mm and are 1150 mm wide. Always measure the gate against the overall width from the product page.
Width ranking
MERI machines ranked by overall width
| Model | Overall width | Height | Weight | Job |
|---|---|---|---|---|
| ME-RS600 | 600 mm | 600 mm | 192 kg | Snow blowing, optional sweeping |
| ME-RT Series | 750 mm (without tools) | 700 mm | 390 kg without tools | Tillage, weeding, ditching, backfilling |
| ME-RT PRO | 920 mm | 740 mm | 500 kg | Soil work; optional mowing and snow plow |
| ME800-24, ME800D-24 | 950 mm | 920 mm | 355 kg | Flail mowing |
| ME800-48, ME800D-48 | 950 mm | 920 mm | 402 kg | Flail mowing |
| ME550-T | 1000 mm | 500 mm | 160 kg | Flat-blade turf mowing |
| ME650-T | Wider than ME550-T; confirm with MERI | Confirm with MERI | 200 kg | Flat-blade turf mowing |
| ME-RS | 1000 mm | 850 mm | 390 kg | Snow blowing and plowing |
| ME1000 models | 1150 mm | 920 mm | 376–424 kg | Flail mowing |
| ME-RFM1000-D / -E | 1250 mm | 870 / 640 mm | 550–600 / 882 kg | Forestry mulching |
| ME900-T | 1300 mm | 500 mm | 280 kg | Flat-blade turf mowing |
| ME1200 models | 1350 mm | 920 mm | 386–445 kg | Flail mowing |
Measuring the route
Measure the whole route, not just the gate

- Narrowest point. Gate, bollards, bridge or path, measured at track height.
- Margin. Leave space on each side; posts and hinges are rarely square.
- Height. Low beams, branches or panels on the route. ME550-T and ME900-T are 500 mm high; confirm ME650-T dimensions with MERI.
- Turning. Space to turn at the end of a narrow path; published mower lengths range from 1100–1750 mm. Confirm ME650-T dimensions with MERI.
- Trailer. Payload and ramp rating against the machine weight.
- Ground. Soft verges or kerbs at the gate approach.
Limits
Where a compact machine is not enough
Large open areas.
A compact deck covers less ground per pass. If the gate allows, a 1000 or 1200 mm flail mower finishes large banks sooner.
Rough cover on a T-Series.
The ME550-T and ME650-T use flat blades for maintained grass. For rough cover through a narrow gate, the 950 mm wide ME800 flail mowers are the option.
Woody scrub.
The forestry mulchers are 1250 mm wide. Narrow-access brush clearing needs a gate check first.
Before you ask for a quote
What to send MERI
Narrowest gate or path width, with a photo.
Lowest height on the route, if any.
Trailer payload and ramp rating.
Vegetation type, slope, units and destination.
Questions
FAQ
What is the narrowest MERI mower?
The 800 mm flail mowers (ME800-24, ME800-48, ME800D-24 and ME800D-48) are 950 mm wide overall. ME550-T is 1000 mm wide; ME650-T is wider than ME550-T, so confirm its dimensions with MERI.
What is the lightest MERI mower?
The ME550-T at 160 kg. The ME650-T weighs 200 kg.
Will a 1000 mm cutting deck pass a 1 m gate?
Usually not. The ME1000 flail mowers are 1150 mm wide overall. Check the overall width on the product page, not the cutting width.
Is there a compact machine for snow?
Yes. The ME-RS600 tracked snow blower is 600 mm wide and weighs 192 kg.
What is the minimum order?
One unit for a sample. Wholesale pricing starts from 5 units.
Keep reading
Related MERI pages
Send us your narrowest gate
Send the gate width, trailer and vegetation. We reply within 24 hours with the machines that fit.