Agricultural sprayer selection

ME-RCS200 vs RCS300 vs RCS400 vs RCS500

Choose between 200, 300, 400 and 500 litres using the actual machine envelope and refill route, not tank volume alone. These are four distinct ME-RCS sizes, each ordered in a boom or airblast configuration.

Best fit: Compare refill trips, usable passage, transport and tank size together; larger tank is not guaranteed higher daily output.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI airblast sprayer configuration on the factory floor
Factory photograph of a MERI airblast configuration; shown as a configuration reference.
200–500 LFour tank sizes
850–980 mmListed overall widths
280–465 kgListed model weights
200 mPublished remote range

Summary

Short answer

The ME-RCS200 starts at 200 L with an 850 mm listed overall width. Moving to 300 L increases the listed weight from 280 to 351 kg; the 500 L model reaches 465 kg. Check the access and transport limits before choosing the largest tank.

At the same application rate, a larger tank carries more liquid between refills. It does not prove a higher daily output: crop layout, turning time, refill access and the chosen spray setup still determine the working cycle.

Fit check

Compare the four machine sizes

Model figures from the MERI technical data sheets and confirmed specification corrections. Chassis width is distinct from overall width.
ModelTank capacityOverall L × W × HChassis widthListed weight
ME-RCS200200 L1650 × 850 × 960 mm700 mm280 kg
ME-RCS300300 L1720 × 900 × 1140 mm900 mm351 kg
ME-RCS400400 L1850 × 960 × 1140 mm960 mm420 kg
ME-RCS500500 L2000 × 980 × 1170 mm980 mm465 kg

Match the application

Choose the spray system before the tank size

MERI airblast sprayer configuration on the factory floor
Factory photograph of a MERI airblast configuration; shown as a configuration reference.
  • Boom (-B). For vegetables, low crops and applications requiring a suitable boom layout; confirm row spacing and the intended coverage.
  • Airblast (-A). For orchard and vineyard canopies where the selected fan and nozzle layout need to match crop geometry.
  • Access and refilling. Measure the narrowest passage and turning area, and identify the refill point before deciding tank capacity.

Limits

Checks that prevent a mismatched order

Access

Overall width, projecting parts and crop clearance matter. Chassis width is not ground clearance.

Application

Travel speed is a machine figure, not a promised spraying output. Work with the actual crop and application requirements.

Destination

Confirm the engine and destination documentation before ordering. Do not assume a diesel configuration suits an EPA-regulated market.

Before you ask for a quote

What to send MERI

Crop, canopy height and row spacing.

Narrowest passage and turning-area photos.

Refill location, tank preference and spray configuration.

Order quantity and delivery destination.

Questions

FAQ

Which model is narrowest?

The ME-RCS200 lists an overall width of 850 mm. The RCS300, RCS400 and RCS500 list 900, 960 and 980 mm respectively. Leave working clearance for crop growth and turns.

Does a larger tank guarantee more hectares per day?

No. Compare the application rate and refill trip time along with row length, turning space and operating conditions. Tank volume alone is not a productivity measurement.

Can I swap between boom and airblast systems?

Choose -B boom or -A airblast when ordering. These are order configurations, not a promise that one machine switches between the two spray systems.

Are nozzle quantities fixed?

Nozzle layout and quantity can be customized for the order. Send crop type, row spacing and canopy dimensions so the spray layout can be discussed.

What information should I send for a quote?

Send the preferred tank capacity, crop and row dimensions, narrowest passage, refill location, quantity and destination. Include photos of access points and turning areas.

Keep reading

Related MERI pages

Discuss your sprayer configuration with MERI

Send the crop, access measurements and refill conditions so MERI can match the tank and spray layout to the job.