Generator

Generator for Gasoline and Diesel Remote Mowers

On MERI hybrid mowers the engine drives a generator that charges the battery for the electric tracks. If the battery keeps running flat, check the charging side.

Fits: MERI gasoline and diesel remote mowers. Confirm by machine nameplate model and part number.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
Belt-driven generator mounted beside the engine on a MERI remote control mower
Belt-driven generator (MERI-P04).
46Common spare-part types stocked
48 hCommon parts dispatched
100+Countries exported
CECertified
ISO 9001Quality management
24 hReply time

Summary

Short answer

MERI-P04 is the Generator. It is a priority-B service part. MERI suggests one per dealer location.

Before you replace it, check the charging switch and the voltmeter reading. A switch left off looks like a charging fault.

At a glance

Part numbers, fit and check points

Part numbers and names: MERI Spare Parts Catalog (MERI-P01 to MERI-P46). Stock priority and opening quantities: MERI Recommended Spare Parts Package, per dealer location. Check points: MERI operation and maintenance notes and the operator manual. Prices are quoted per order.
Part numberPart nameFitsDealer stockCheck points
MERI-P04GeneratorConfirm by machine nameplate model and part numberPriority B (service part); suggested opening stock 1 pcTurn on the charging switch when mowing. On 48 V machines the voltmeter should read above 48 V and below 56 V.

Quality control

Checks from the operator manual

Battery tray and motor controllers in the open electrical box of a MERI remote control mower
Battery tray and controllers in the electrical box.
  • Start-up: after the engine starts, set full throttle and turn on the charging switch before mowing.
  • Shut-down: turn off the charging switch and the main power switch after stopping the engine.
  • Voltage (48 V machines): the manual gives a normal power-on reading above 48 V and below 56 V.
  • Belt: the generator is belt-driven; check belt tension before each use.

Before you ask for a quote

What to send MERI with your order

Machine model from the nameplate, for example ME1000D-48.

MERI part number (MERI-Pxx) and quantity.

A photo of the old part and, if you have it, the engine model and serial number.

Destination country and port, or courier address.

Voltmeter readings with the engine off and running.

Questions

FAQ

How do I know the generator has failed?

Check the charging switch is on and the belt is tight. Then send MERI the voltmeter readings with the engine off and running.

Does the generator fit both gasoline and diesel models?

The catalog lists one generator part, MERI-P04. Confirm with the nameplate model before ordering.

What voltage should a 48 V machine show?

The operator manual gives a normal reading above 48 V and below 56 V at power-on.

How many generators should a dealer keep?

The MERI recommended package suggests 1 per dealer location.

How fast does MERI ship these parts?

MERI dispatches its 46 common spare parts within 48 hours. Transit time depends on the destination and the shipping method you choose.

Keep reading

Related MERI pages

Spare parts quote or dealer stock advice

Send the models you support. MERI will confirm the generator and suggest a starting stock.

Need this part? Send the part number from the MERI spare parts catalog, your machine model and the serial number from the nameplate. We confirm the right part and reply within 24 hours.