Planning · Work rate

Remote Mower Work Rate by Model: m²/h, Hectares per Day and What Slows It

Buyers ask how much ground one machine can cut in a day. The spec sheet gives a reference rate per hour. Real output depends on the grass, the slope, the route and how often the machine stops.

Reference rate: ME800 4,000 m²/h · ME1000 5,000 m²/h · ME1200 6,000 m²/h (gasoline and diesel, 24 V and 48 V).

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI remote mower turning at an orchard headland
Turns at row ends cost working time
4,000 m²/hME800 series
5,000 m²/hME1000 series
6,000 m²/hME1200 series
0–5 km/hTravel speed
5.5 LFuel tank

Reference rates

Reference work rate by model

The rate is the same for gasoline and diesel and for 24 V and 48 V versions of the same deck width. The T-Series turf mowers have no fixed rate; it depends on the site.

Reference work rates from MERI product pages. A day of 8 working hours, before stops.
Model groupCutting widthReference ratePer 8 h day (reference)
ME800-24 / -48 / D-24 / D-48800 mm4,000 m²/habout 3.2 ha
ME1000-24 / -48 / D-24 / D-481000 mm5,000 m²/habout 4 ha
ME1200-24 / -48 / D-24 / D-481200 mm6,000 m²/habout 4.8 ha
ME550-T / ME650-T / ME900-T550 / 650 / 900 mmsite-dependentconfirm for the task

1 hectare = 10,000 m². The day figure is the reference rate × 8 hours. Real days are shorter.

Real output

What lowers the real work rate

Common reasons real output is below the reference rate.
FactorEffectWhat to do
Tall or dense growthSlower travel to keep the cut cleanCut more often, or make a first pass high
Steep slopesSlower passes and more care at turnsPlan straight runs across the slope where safe
Short rows and many turnsTime lost at each endUse the widest deck that fits the rows
RefuellingStops every few hours (5.5 L tank)Keep fuel near the work area
ObstaclesTrees, posts and panels need careful passesMark obstacles before the first cut

What it means for you

How buyers use the work rate

Fleet size

Divide the area to cut each cycle by a realistic daily output, then add a margin for weather.

Choosing deck width

On open land a wider deck cuts more per hour. In tight rows a narrower machine may be faster overall.

Labour planning

Customer feedback and MERI tests put one remote mower at about 8–10 workers with brush cutters on slope and orchard work.

Contract pricing

Contractors price per hectare. Measure your own rate on the first jobs and adjust.

MERI mower working along an orchard route

Example

A quick estimate

A 20 ha site cut every 4 weeks with an ME1000: at about 4 ha per reference day, plan 5 days per cycle, then add time for slopes and turns. Send us a map or photos and we will check the estimate.

Questions

Frequently asked questions

How many m² per hour does the ME1200 cut?

The reference rate is 6,000 m²/h.

Is the 48 V version faster?

The reference rate is the same for 24 V and 48 V. 48 V gives more travel power on slopes.

Why is there no rate for the T-Series?

Turf work varies too much by site. We confirm a rate for your task.

How many hectares per day?

About 3.2, 4 and 4.8 ha per 8-hour reference day for ME800, ME1000 and ME1200. Real output is lower.

Can you estimate my site?

Yes. Send the area, slope, grass type and photos.

Keep reading

Related MERI resources

Want a work-rate estimate for your site?

Send the area, slope and grass type. We reply within 24 hours.