Tool · Snow
Snow Clearing Time Calculator: Hours and Machines for Car Parks and Yards
Enter the area to clear, the snow condition and how many hours you have before people arrive. The calculator shows clearing time with one machine and how many machines you need.
The ME-RS clears up to 0.6 ha/h (6,000 m²/h). Example: 8,000 m² of normal snowfall (75%) takes about 1.8 hours with one ME-RS, so one machine finishes inside a 2-hour window.
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Calculator
Snow clearing time and machines
Estimate only. ME-RS uses its listed maximum rate of 0.6 ha/h. The ME-RS600 rate is calculated from its 600 mm width and 4 km/h low travel speed; no rate is listed on its data sheet. The snow factor is your planning assumption.
Data
Figures behind the calculator
| Machine | Clearing width | Speed | Rate used |
|---|---|---|---|
| ME-RS | 600 / 800 / 1000 mm | Up to 5 km/h | 6,000 m²/h (listed: up to 0.6 ha/h) |
| ME-RS600 | 600 mm (800 mm sweeper) | 4–6 km/h | 2,400 m²/h (calculated: 0.6 m × 4 km/h) |
| ME-SB560 | 560 mm | By gear (6 forward / 2 reverse) | Not included (walk-behind) |
Worked examples
Example sites
| Site | Inputs | Result |
|---|---|---|
| Office car park | 8,000 m², ME-RS, normal snow (75%), 2 h | 1.8 h · 1 machine |
| Retail park | 2.5 ha, ME-RS, deep snow (50%), 3 h | 8.3 h · 3 machines |
| Campus paths | 3,000 m², ME-RS600, normal snow (75%), 1.5 h | 1.7 h · 2 machines |
What it means for you
Planning a snow morning
Start early
Clear before traffic packs the snow down.
Clear in layers
In deep snow, two lifts clear faster than one heavy pass.
Plan the throw
Throw away from doors, cars and the road.
Add a walk-behind
The ME-SB560 finishes steps and entrances.

Wet snow
Why wet snow halves the rate
Wet, heavy snow loads the auger and chute and slows the machine. Packed or drifted snow is slower again. Choose a lower snow factor on those days and plan more time or more machines.
Questions
Frequently asked questions
How fast does the ME-RS clear snow?
Up to 0.6 ha/h (6,000 m²/h) in good conditions.
Where does the ME-RS600 rate come from?
It is calculated from its 600 mm width and 4 km/h low travel speed. No rate is listed on its data sheet.
Why does snow condition matter so much?
Deep, wet or packed snow loads the machine and slows travel.
Does it include the walk-behind ME-SB560?
No. Use it for steps and entrances alongside the remote machines.
Can MERI check my plan?
Yes. Send the site map, surfaces and typical snowfall.
Keep reading
Related MERI resources
Planning winter cover?
Send the areas, surfaces and typical snowfall. We reply within 24 hours.