Equipment comparison
Vesco XT800 Alternative: Compare MERI Tracked Mowers
The Vesco XT800 is a radio-controlled flail mower with a published 284 kg weight and 30°–40° slope figure. The MERI ME800-24 is an 800 mm gasoline flail mower. Compare the complete working package and access requirements before choosing.
Best fit: compare the actual job, access dimensions and supplied tools before choosing a machine.
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Summary
Short answer
The XT800 overview publishes a lower weight than the ME800-24: 284 versus 355 kg. That 71 kg difference matters for trailer capacity and handling, but it does not establish which mower cuts your vegetation better.
The MERI option lists an 800 mm cut and 30–300 mm cutting-height range. Ask for the actual Vesco cutting configuration and the complete delivered specification before comparing coverage or productivity.
Fit check
Published specifications, compared on the same page
| Point | Vesco XT800 | MERI ME800-24 |
|---|---|---|
| Machine type | Radio-controlled flail mower | Remote tracked flail mower |
| Machine dimensions | 117 × 125 × 59 cm; official dimension order not expanded here | 1650 × 950 × 920 mm (L × W × H) |
| Listed machine weight | 284 kg | 355 kg net |
| Published slope figure | 30°–40°, with official qualification | 45° maximum working slope |
| Cutting width | Not stated on the checked product overview | 800 mm |
| Cutting height | Not stated on the checked product overview | 30–300 mm |
| Engine | Not stated on the checked product overview | LONCIN 459 gasoline, 18 hp maximum output |
| Travel speed | Not stated on the checked product overview | 0–5 km/h |
Choose the job first
Match the equipment to your working season

- Main task. Tell MERI whether the machine will mow most days or alternate between mowing and soil work.
- Access. Measure the narrowest entrance, turning space and loading arrangement; cutting width alone is insufficient.
- Support. Request the parts list and the service information for the exact delivered configuration.
Limits
What these figures do and do not establish
Model scope
The checked XT800 overview omits several cutting and engine fields. A blank comparison cell is not evidence that a feature is unavailable.
Test basis
Slope ratings come from separate manufacturer statements, not one shared test. They do not prove a safe working angle on every surface.
Order configuration
Compare supplied cutting equipment, service access and replacement parts before deciding on the headline weight.
Before you ask for a quote
What to send MERI
Main job and vegetation photographs.
Narrowest access and transport limits.
Required tools and seasonal working pattern.
Destination, quantity and support needs.
Questions
FAQ
Is MERI the same machine as Vesco XT800?
No. This page compares separate brands and their published equipment information. It does not claim shared manufacture, parts interchangeability or endorsement.
Are the specifications from one comparative test?
No. The figures come from the respective official product material and MERI model data. Conditions, equipment and definitions can differ.
How should I compare mowing capacity?
Start with cutting configuration, vegetation and access. Cutting width, engine power or travel speed alone does not prove a daily mowing output.
Will the attachments interchange?
Do not assume compatibility between brands. Confirm the supplied implement and mounting arrangement for the machine being ordered.
What should I send for a MERI alternative quote?
Send your main task, site photos, access measurements, required working tools, quantity and destination so the correct MERI platform can be discussed.
Keep reading
Related MERI pages
Compare a MERI configuration for your site
Send the working conditions and the equipment you need, and ask MERI for a configuration comparison.