
Short answer: Adding snow services lets a landscaping business keep its crew and clients through winter. Start with the sites you already mow. Price and plan by site, not by storm. Choose equipment that one person can run safely on paths, ramps and car parks. A remote tracked snow blower such as the MERI ME-RS or ME-RS600 lets one operator clear walkways while staying out of the snow-throw zone.
For many landscaping firms, winter means laid-off staff and idle trucks. The same clients still need their paths and entrances cleared. If you do not offer it, another contractor will, and may take the summer work too.
This guide is for landscaping business owners and the dealers who supply them. It covers how to start, what to plan, and where remote snow machines fit.
Start with the clients you already have
Your mowing clients are the easiest first customers. You know their sites, gates and hazards. They already trust your crew.
- List every site you mow in a snow area.
- Mark the areas that need clearing: entrances, footpaths, ramps, steps, car parks.
- Note slopes, kerbs, drains and where snow can be piled.
- Ask each client what time the site must be clear in the morning.
The last point decides your route. Ten sites that all need clear paths by 7 a.m. need more crews than ten sites with a noon deadline.
Write the snow plan per site
A one-page plan per site saves arguments later. Agree it with the client before the first snowfall.
- A site map with the areas to clear, in order of priority.
- The snow depth that triggers a visit.
- Where piles go, away from drains, exits and sight lines.
- Who handles de-icing, and with what.
- How you record each visit: time, depth, photos.
Check with your insurer before you sign winter contracts. Snow and ice work carries different risks from mowing.

Choosing equipment: what a landscaper needs
Most landscapers do not need a loader. They need machines that fit footpaths, ramps and tight entrances, and that one person can run. The table compares two MERI remote snow blowers. Figures are from the model data sheets.
| Item | ME-RS | ME-RS600 |
|---|---|---|
| Engine | Loncin petrol, 16 hp, electric start | Loncin 196 low-temperature type, 8 hp |
| Clearing width | 600 / 800 / 1,000 mm | 600 mm blowing; 800 mm sweeper option |
| Snow depth | 30–600 mm | Confirm with MERI |
| Throw distance | 3–5 m | Chute rotates up to 180° |
| Work rate | Up to 0.6 ha/h | Not listed |
| Remote range | Up to 800 m | 500 m |
| Weight | 390 kg | 192 kg |
The ME-RS suits car parks, yards and wide paths. The lighter ME-RS600 suits footpaths, entrances and sites with tight access. There is also a dual-end ME-RS with a blower at the front and a plow at the back, for sites that need both.
Why remote operation helps a small crew
With a walk-behind blower, the operator walks in the snow, close to the auger and the throw. With a remote machine, the operator stands back on a cleared spot. That means less fatigue on long early shifts and more distance from the machine.
If the remote signal is lost, the machine stops. Even so, keep it in sight, and keep the public away from the throw direction.

Making the season pay
Snow work is uneven. Some winters are busy, some are quiet. Plan for both.
- Agree how you charge: per visit, per season, or a mix. Put it in writing.
- Keep your summer crew. Winter work is often the reason good staff stay.
- Store snow machines where they can leave fast at 4 a.m.
- Do a pre-season check on every machine before the first forecast.
Our remote snow blower buying checklist covers what to confirm before you order. For the full range, see remote control snow removal equipment, or the ME-RS and ME-RS600 product pages.
If you also sell to property managers, our page on remote snow blowers for property managers explains what they look for. On the summer side, see remote mowers for landscaping contractors.
What to send MERI
- Number of sites and the narrowest path you must clear.
- Typical snowfall depth and type: dry or wet.
- Slopes and ramps on your routes.
- How many machines you plan for the first season.
Frequently asked questions
How should a landscaper start offering snow removal?
Start with the sites you already mow. Map the areas to clear, agree a written plan with each client, and set your route by the time each site must be clear.
Which MERI snow blower suits footpaths?
The ME-RS600 is the lighter unit, at 192 kg with a 600 mm blowing width. The ME-RS offers 600, 800 or 1,000 mm widths for wider areas.
Can one machine plow and blow snow?
Yes. The dual-end ME-RS carries a blower at the front and a plow blade at the back.
What happens if the remote loses signal?
The machine stops. Keep it in sight and keep people away from the throw direction.
Add remote snow machines to your fleet
Tell MERI about your sites, paths and snowfall. We will suggest a model mix and confirm the specification in your quote.
Need a mower recommendation for your terrain or project?
Get a Quote