ME1000-48 for Ski Slope Summer Mowing: A Model Guide for Resorts — remote control lawn mower article

Short answer: Ski runs need a summer cut so grass and scrub do not hold snow badly or hide stones. The ME1000-48 is a remote tracked flail mower with a 1,000 mm deck, 30–300 mm cutting height and a 45° slope rating on the product page. It suits open pistes between lift lines; very steep or rocky runs need a site check first.

Why ski runs are mowed in summer

When the snow melts, ski runs turn into steep meadows. Left alone, the grass grows tall and scrub starts to move in. Tall grass can mat down under early snow and create a slippery base. Shrubs and stones become hazards for skiers in thin-snow periods.

Most resorts cut the main runs once or twice in summer. On gentle runs a tractor can do it. On steep runs the job has often been done with brush cutters, which is slow and hard on staff.

ME1000-48 product page figures

ItemProduct page figure
EngineLONCIN 459 gasoline, 18 HP
Cutting width1,000 mm
Control system48 V
Electric power2,000 W
Blades40 (flail)
Cutting height30–300 mm (adjustable)
Max slope45°
Remote range800 m
Travel speed0–5 km/h
Fuel tank5.5 L
Weight424 kg
Dimensions (L×W×H)1750×1150×920 mm
Listed working efficiency5,000 m²/hour

Data from the live MERI product page. Confirm the order configuration with MERI before you buy.

Why a 1,000 mm flail deck

Ski runs are wide and open, but the grass can be long and mixed with herbs and small shrubs. A flail deck handles this better than a flat blade and drops the cut material as a mulch. The 1,000 mm width is a balance: wide enough for open runs, still manageable on a trailer and on narrow service tracks.

MERI ME1000-48 gasoline remote control flail mower, side view
Side view of the MERI ME1000-48. The tracked chassis and 1,000 mm flail deck are built for steep, open grass.
MERI video: testing the ME1000-48 remote mower.

Planning the season

  • After melt: walk the runs and mark rocks, drainage channels, snow-making pipes and hydrants.
  • First cut: high cut on the runs that grew most. Clear stones the deck exposes.
  • Second cut: late summer, lower if the ground is clean.
  • Before closing: check the runs that open first in winter and touch up any missed areas.

Moving the machine on the mountain

The ME1000-48 weighs 424 kg according to the product page. Plan how it reaches each run. Many resorts use a service track and a trailer or a small transporter. Do not drive the machine long distances on gravel tracks if you can carry it; it saves track and drive wear.

At altitude, weather changes quickly. Stop work in fog, heavy rain or lightning. The operator must keep the machine in sight at all times. The remote range is listed as 800 m, but on a mountain you should stay much closer.

Obstacles on ski runs

ObstacleWhat to do
Snow-making hydrants and pipesMark with poles; mow around by hand
Lift tower basesKeep a safe distance; strim close
Drainage cross-channelsCross slowly, straight on, or avoid
Rock outcropsRaise the deck or leave unmown

Agree no-go areas with the lift and snow-making teams before the first cut.

A worked example

A resort cuts six main runs in summer, about 14 ha in total, with the steepest sections near the top lifts. Brush cutter crews used to take three weeks. With one ME1000-48 working the open sections and a small crew trimming around hydrants and lift towers, the first cut takes about a week. The resort logs hours per run and uses the figures to plan the second cut and the staff roster for next summer.

Staff and safety

Use trained operators and keep a second person nearby on steep runs. Hikers and mountain bikers use many resorts in summer, so close the run or post a lookout while mowing. Log the area cut and the hours on each run. The figures help you plan staffing for next summer.

Related MERI pages

Frequently asked questions

Can the ME1000-48 mow the steepest ski runs?

The product page lists a 45° maximum slope. Many black runs reach or pass that on parts of the run, so check each section before mowing.

Does altitude affect the machine?

Petrol engines lose some power at altitude. Plan for slower work on high runs and ask MERI about your site height before ordering.

How is the machine controlled?

By a handheld remote with a listed range of 800 m. On a mountain, keep the machine in clear sight.

Does the flail deck mulch the grass?

Yes. The flail blades chop the grass and drop it on the run as a mulch.

Send us your site details

Tell us the job, area, slope and country. MERI replies within 24 hours.

Ask MERI

Need a mower recommendation for your terrain or project?

Get a Quote
Get a Quote