
Short answer: The ME900-T has a 900 mm flat-blade deck, 20–200 mm cutting height and a 45° slope rating on its product page. On a golf course it suits semi-rough and rough on slopes, mounds, tree lines and the low ground under branches. Greens, tees and fairways stay with fine-turf mowers.
Rough areas that cost the most time
On many courses, the rough on slopes and mounds takes a large share of the crew’s hours. Ride-on rough mowers cannot hold steep mounds, and tree lines with low branches block them. The work falls to hover mowers and strimmers.
The ME900-T is a low, tracked remote mower. It gives a lawn-style cut, which suits rough areas that must still look maintained.
ME900-T product page figures
| Item | Product page figure |
|---|---|
| Engine | LONCIN 452 gasoline, 16 HP |
| Cutting width | 900 mm |
| Control system | 24 V |
| Electric power | 1,300 W |
| Blades | 2 (flat blade) |
| Cutting height | 20–200 mm (adjustable) |
| Max slope | 45° |
| Remote range | 800 m |
| Travel speed | 0–5 km/h |
| Fuel tank | 5.5 L |
| Weight | 280 kg |
| Dimensions (L×W×H) | 1450×1300×500 mm |
Data from the live MERI product page. Confirm the order configuration with MERI before you buy.
Why the ME900-T suits rough
The 900 mm flat-blade deck gives a tidy, even finish closer to what golfers expect than a flail deck. It is the widest of the T-Series decks, so it covers more ground per pass. At 500 mm high it reaches under trees on the edges of holes.

Where to use it on the course
| Area | ME900-T role |
|---|---|
| Mounds and slopes in the rough | Main use |
| Tree lines and under branches | Main use; 500 mm height |
| Bunker surrounds | Possible where faces are not too steep; hand finish edges |
| Out-of-play long grass | Higher cut; a flail mower may suit very long grass better |
| Greens, tees, fairways | Not suitable; use fine-turf mowers |
Agree areas with the course manager and check overall width of 1300 mm against paths and bridges.
A weekly plan around play
- Start on holes that open last, ahead of the first groups.
- Mow mounds and slopes in the morning, while staff are on site.
- Move to tree lines mid-morning, away from the line of play.
- Stop the machine when golfers are in range and resume once they pass.
- Log time per hole to refine the plan.
Cutting height and finish
Set the deck to match the height of the surrounding rough so the slopes blend in. The range is 20 to 200 mm. Mow when the grass is dry for the cleanest finish. Change direction each visit to avoid lines and keep the turf upright.
Staffing and safety
One trained operator can run the ME900-T while others work on presentation tasks. The remote range is listed as 800 m, but on a busy course keep the machine close and in sight. Keep golfers and staff out of the cutting area and park the machine with the engine off when you leave it.
A worked example
A parkland course has about 3 ha of sloping rough and tree lines that the crew used to cut with hover mowers. With the ME900-T, one operator cuts the slopes on nine holes each morning, three days a week. The crew logs each hole for a month. The log shows which holes take longest and where the course could convert some rough to native grass to save time.
Keep the blades sharp and balanced. A worn flat blade tears the grass tips, which shows as a pale finish on rough that golfers walk past every day.
Daily checks
- Blades tight and sharp; no cracks.
- Tracks tensioned; no stones in the drive.
- Remote control charged and stop tested.
- Deck clean underneath for an even cut.
- Fuel topped up away from greens and tees.
ME900-T or a flail mower?
For tidy rough on slopes, the ME900-T gives a better finish. For native areas cut once or twice a year, or very long grass with weeds and shrubs, a flail mower such as the ME800-48 handles the material better. Many courses end up with both.
Related MERI pages
- ME900-T remote mower
- Remote mowers for golf course slopes
- Out-of-play golf rough with fewer staff
- ME550-T vs ME650-T vs ME900-T
- ME900-T wide flat-blade case
- Cutting height by model
Frequently asked questions
Can the ME900-T mow greens or fairways?
No. It is for rough, slopes and tree lines. Use fine-turf mowers for greens, tees and fairways.
How wide is the ME900-T?
The product page lists 1450×1300×500 mm with a 900 mm cutting width.
What engine does it have?
A LONCIN 452 gasoline engine, 16 HP, with a 24 V control system and 1,300 W electric power.
What slope can it handle?
The product page lists a maximum slope of 45°. Wet turf reduces grip, so take care on mounds after rain.
Send us your site details
Tell us the job, area, slope and country. MERI replies within 24 hours.
Need a mower recommendation for your terrain or project?
Get a Quote