Factory-direct equipment · Côte d’Ivoire · Cameroon

Remote Control Mowers for Côte d’Ivoire and Cameroon: Cocoa, Rubber and Palm Estates

Cut inter-rows in cocoa, rubber and oil palm blocks without sending crews in with brush cutters. Ship to Abidjan, San-Pédro, Douala or Kribi with parts in the same container.

Best fit: ME800-48 under cocoa canopy · ME1000D-48 or ME1200D-48 for rubber and palm inter-rows.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI tracked remote mower clearing grass along an estate row
MERI tracked mower clearing an estate row
6,000 m²/hWork rate, up to
48 hCommon spare parts shipped
100+Countries exported
CECertified
ISO 9001Quality management
24 hReply time

Model choice

Choose a configuration

Cocoa farms → ME800-48

800 mm cut and 950 mm overall width for rows under shade trees. Cutting height 30–300 mm.

Rubber estates → ME1000D-48

Diesel, 1000 mm flail, 5,000 m²/h. Keeps tapping paths and inter-rows open between rainy seasons.

Oil palm blocks → ME1200D-48

1200 mm flail for wide inter-rows, harvest paths and frond-stack edges. 6,000 m²/h rated.

Banana farms and factory grounds (Cameroon) → ME1000-48

Gasoline option for drainage banks, roadsides and agro-industry sites around Douala and the Moungo valley.

Check import and delivery

Côte d’Ivoire and Cameroon import and site checklist (check current rules with your licensed broker).
Decision pointWhat to checkMERI provides
LanguageQuotes, invoices and labels in French are often requestedEnglish shipping documents as standard; the commercial invoice and packing list can also be prepared in French on request
PortsAbidjan or San-Pédro (Côte d’Ivoire); Douala or Kribi (Cameroon)FOB or CIF by 20 ft / 40 ft container; we quote both ports for each country
Customs regionCôte d’Ivoire is in ECOWAS and UEMOA; Cameroon is in CEMAC. Formalities differProforma invoice, commercial invoice, packing list, CE and ISO 9001 documents
Pre-shipment conformityCameroon runs a pre-shipment conformity programme (PECAE). Your broker confirms if your HS code needs itMachine data and photos for the inspection body, before loading
Rainy seasonsThe south has a long and a short rainy season; grass grows fastest thenFlail blades and belts packed with the machines
FuelDiesel is the usual estate fuel; gasoline in towns and on smaller farmsDiesel (KOOP) or gasoline (LONCIN) engines
Spare parts46 common part typesShipped within 48 hours from the factory

Field evidence

Field and factory examples

Working conditions

Tracked mower operating on grass beside trees
MERI mower on grass beside a tree line. Check canopy height and row width before choosing a deck.

Factory and packing

Front view of machines stacked in a wrapped steel transport frame
Steel-frame packing fits more units in one container for estate fleets.

What is different in this market

Two countries, two customs regions.

Côte d’Ivoire clears under UEMOA rules and Cameroon under CEMAC rules. Plan a broker in each.

Cocoa is low and shaded.

Cocoa trees are short and planted close. Measure the lowest branch and the narrowest gap before you pick a model.

Rubber and palm are wide and wet.

Inter-rows are wider, but drains and soft ground are common in the wet season. Tracks spread the load of a 402–445 kg machine.

French is the working language

on most estates in both countries. English is also used in Cameroon’s North-West and South-West.

Step by step

Plan your order

Measure the narrowest row and the lowest branch in each crop.

Mark drains, culverts and soft ground for the wet season.

Choose diesel or gasoline, and the port: Abidjan, San-Pédro, Douala or Kribi.

Ask your broker which conformity steps apply to your HS code.

Add blades, belts and air filters to the first container.

Questions

Frequently asked questions

Which MERI model suits cocoa farms?

The ME800-48. It cuts 800 mm, is 950 mm wide overall and adjusts from 30 to 300 mm. Measure the lowest branches before ordering.

Can you ship to both Abidjan and Douala in one order?

We quote each port separately. Two containers or two LCL lots are normal, because the customs files differ between the two countries.

Do you supply French documents?

English shipping documents are standard. The commercial invoice and packing list can also be prepared in French on request; tell us when you ask for the quote.

How fast do you ship?

One to ten units leave about 7 days after payment. Larger orders take 7–15 days. The 46 common spare-part types ship within 48 hours.

Are you looking for dealers in West and Central Africa?

Yes. Qualified dealers can get exclusive territory rights, and dealers typically earn a 40–60% gross margin.

Keep reading

Related buying resources

Get a quote for Abidjan, San-Pédro, Douala or Kribi

Send the crop, row width, number of hectares and your port. We reply within 24 hours.