Factory-direct equipment · New Zealand
Buying a Commercial Remote Control Mower in New Zealand
Choose a mower for banks, lifestyle blocks or maintained turf. Confirm the machine, shipping scope and biosecurity paperwork before ordering.
- CE Certified
- EPA Compliant
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Choose the mower around the work
Configuration shortlist
Start with the mowing route and the work it needs to do. For rough grass and scrub maintenance where the access width allows it, shortlist the ME1000-48 petrol tracked flail mower. For maintained turf, compare a T-Series flat-blade configuration. Ask for the working configuration and the New Zealand delivery scope in the same quote.
Rough growth on banks and lifestyle blocks
Compare the ME1000-48 against the narrowest gate, trailer and turning area. A nominal 1,000 mm cutting width describes the cutting head. Ask for the overall machine width and transport dimensions with the selected attachment fitted.
Maintained turf and a finer finish
Use the T-Series as a shortlist for regularly cut grass. Match the deck width to the route, the finish to the maintenance schedule, and the blade arrangement to the material. Walk the turning area before choosing a wider machine.
On a wet or uneven bank, send both the lengthwise and cross-slope measurements along with photos of the approach, runout and soft ground. Compare the proposed operating setup against the site rather than choosing by a single maximum slope figure.
At a glance
Compare the quote and import preparation
Procurement checklist
Compare what to send with what to confirm before ordering.
| Decision point | Send with the inquiry | Confirm before placing the order |
|---|---|---|
| Site and transport | Gate, trailer deck and turning space. Vegetation, ground condition and slope in degrees. | Exact cutter, overall dimensions, loaded weight and a suitable working route. |
| Packing and delivery | Final delivery suburb or postcode, intended port if known, unloading facilities and quantity. | Named delivery point, trade term, packing size and what the freight quote includes. |
| Biosecurity | Whether each item is new or used, including attachments and spare parts. | Cleanliness, required declarations or certificates, wood packaging and how the broker will arrange clearance. |
| Support and parts | Likely wear points, operators, preferred maintenance schedule and any remote location constraints. | Parts list for the ordered configuration, included spares, commissioning materials and service responsibilities. |
New Zealand’s Ministry for Primary Industries distinguishes new machinery from used equipment for biosecurity purposes. It requires machinery to be cleaned before shipping and calls for a cleaning certificate for used outdoor or targeted machinery. Have your broker check the current standard for your specific consignment and packaging before booking freight.
Field evidence
Field and packing examples
Site and delivery
Riverbank mowing demonstration

What factory packing looks like

Site conditions
From site survey to landed quote
Measure the siteSend photos and measurements of the hardest part of the route, including the entry gate and the spot where the machine turns.
Confirm the configurationConfirm the exact head, engine, charger if applicable, packing and spare parts on a written quote. Ask your broker to itemise destination charges and clearance steps separately.
Prepare for deliveryBefore shipment, align the machine identification, invoice, packing list and agreed documentation with the broker. Confirm who will unload and commission the machine at the named delivery point.
Questions
Frequently asked questions
Which model suits steep New Zealand farm and lifestyle-block slopes?
Compare the ME800-48 and ME1000-48 for farm and lifestyle-block slopes. Selected models are rated up to 45° under suitable conditions. Send the steepest grade and usable work width.
Can I choose a mower from the cutting width alone?
Width is a start; also tell us the slope, grass type and access so we recommend the right model and blades.
What about local parts support?
The 46 most-used spare-part types ship within 48 hours, and we recommend keeping blades and wear parts in stock.
How can I compare two freight quotes?
Check whether each includes port charges, clearance and delivery to your site; we can quote to the port or delivered.
Do you look for New Zealand dealers?
Yes. Dealers typically earn a 40–60% gross margin, and we reply within 24 hours.
Keep reading
Related buying resources
Related markets
Get a quote for your New Zealand project
Tell us the terrain, vegetation, working width, destination and quantity. Include the tightest access measurement and any packing or spares you want quoted.