
Short answer: To compare a remote mower with a brushcutter crew, measure labour hours per hectare on your own bank, not just machine speed. Time the crew on a marked area. Then compare that with the mower’s output on the same ground. MERI rates the ME1000-48 at up to 5,000 m² per hour and the ME1200D-48 at up to 6,000 m² per hour in suitable conditions. MERI’s own reference is that one machine typically replaces 8–10 workers on slope and orchard work. Your site will set the real figure.
Contractors and councils still clear many steep banks with handheld brushcutters. It works, but it is slow, tiring and hard to staff. When a dealer offers a remote mower, the buyer’s first question is simple: how many labour hours will it save? This guide shows how to answer that with numbers from the buyer’s own site.
MERI output references
| Model | Cutting width | Rated output (suitable conditions) |
|---|---|---|
| ME800 series | 800 mm | Up to 4,000 m²/h |
| ME1000 series | 1,000 mm | Up to 5,000 m²/h |
| ME1200 series | 1,200 mm | Up to 6,000 m²/h |
Source: MERI product and market pages. These are rated figures on suitable ground. Steep slopes, dense brush, obstacles and turns all cut real output. See the slope mower range for model limits. The MERI FAQ gives the 8–10 worker reference for slope and orchard work.

How to time a brushcutter crew fairly
- Mark a test area on a typical bank, such as 1,000 m². Note the slope, grass height and any obstacles.
- Record the crew size and the start and finish time.
- Include breaks, fuel stops, line or blade changes and walking time on the slope.
- Include set-up: signs, cones and moving between sections.
- Divide crew hours by the area to get labour hours per 1,000 m².
Do the same for the remote mower on the same type of ground. Count one operator, plus a spotter if your site rules ask for one. Include unloading, set-up and the walk to a safe operating position.
A simple comparison sheet
| Line | Brushcutter crew | Remote mower |
|---|---|---|
| People on site | Your crew size | 1 operator, plus spotter if required |
| Area per hour | Measured on your test area | Measured on the same ground |
| Labour hours per hectare | People × hours ÷ area | People × hours ÷ area |
| Fuel and consumables | Fuel, line, blades | Fuel, flails, belts |
| Finishing work | None or little | Edges near posts, walls and trees |
Be honest about the finishing work. A remote mower will not reach every corner. Most crews keep one brushcutter for edges around posts, signs and trees. Put those hours in the mower column.
Where the remote mower saves the most
The gap is widest on long, steep banks with even grass. A walking crew slows down on a slope and tires fast. The mower keeps a steady pace. The operator stands at the top or bottom, away from the cutting zone.
The gap is smaller on short, broken sites. Many obstacles, tight access and lots of turning eat into machine time. On those sites, test before you promise a figure. Our highway embankment guide shows how to plan a typical roadside job.

Safety changes the labour picture too
With a brushcutter, the worker stands on the slope next to a spinning head. With a remote mower, the operator works from a clear position with an escape route. The MERI manual asks for a 15 m exclusion zone for people and animals, and more where thrown objects are a risk. That zone also affects how many people you need on site. Our guide to the operator position on banks covers where to stand.
Turning hours into a business case
Once you have labour hours per hectare for both methods, multiply by your hourly labour cost. Add fuel, wear parts and machine cost per hour. Then compare the cost per hectare. If you resell machines, the dealer margin calculator helps you price the machine against the saving you show the customer.
What to send MERI
- Slope angle, bank length and grass or brush type.
- Your crew size and hours on a typical job.
- Access width and how the machine reaches the site.
- Photos or a short video of the bank.
Frequently asked questions
How many workers does one remote mower replace?
MERI’s reference is that one machine typically replaces 8–10 workers on slope and orchard work. Measure on your own site, because slope, vegetation and obstacles change the result.
What output does a MERI mower reach?
In suitable conditions the ME800 series is rated up to 4,000 m²/h, the ME1000 series up to 5,000 m²/h and the ME1200 series up to 6,000 m²/h.
Do I still need a brushcutter with a remote mower?
Usually one, for edges around posts, signs, walls and trees. Count those hours in the remote mower column.
How do I make the comparison fair?
Use the same type of ground, include breaks, set-up and walking time for both methods, and divide total labour hours by the area cut.
Get a slope mower matched to your banks
Send the slope, area and vegetation. We recommend a model and quote it for your crew.
Need a mower recommendation for your terrain or project?
Get a Quote