Mine sites
Remote Control Mowers for Mine Sites and Tailings Dam Slopes
Grass on dam walls and rehabilitated slopes must be cut so inspectors can see the surface. A remote mower does the job with the operator on the crest or toe.
Recommended: ME1000D-48 for embankments · ME1200D-48 for long walls and verges · ME800D-48 for narrow benches.
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Site conditions
What makes this site hard to mow
Embankment faces are long and steep; ride-on machines risk rollover.
Vegetation must stay short so inspectors can see cracks, seepage and erosion.
Work zones, haul traffic and exclusion areas are strictly controlled.
Dust and remote locations make service and parts harder.
Model choice
Recommended configuration
Tailings and water dam faces → ME1000D-48
Diesel, 1000 mm flail, rated for 45° in approved zones.
Long dam walls and haul-road verges → ME1200D-48
1200 mm flail, 6,000 m²/h on open ground.
Narrow benches and drains → ME800D-48
800 mm flail, 950 mm wide overall.
Fleet support → parts kit
46 common part types ship within 48 hours. Keep filters and blades on site.
At a glance
Specifications to compare
| Specification | ME800D-48 | ME1000D-48 | ME1200D-48 |
|---|---|---|---|
| Cutting system | 800 mm flail, 30 blades | 1000 mm flail, 40 blades | 1200 mm flail, 48 blades |
| Overall size (L × W × H) | 1750 × 950 × 920 mm | 1750 × 1150 × 920 mm | 1750 × 1350 × 920 mm |
| Weight | 402 kg | 424 kg | 445 kg |
| Engine | KOOP192 diesel, 12 HP | KOOP195 diesel, 15 HP | KOOP195 diesel, 15 HP |
| Cutting height | 30–300 mm | 30–300 mm | 30–300 mm |
| Rated work rate | 4,000 m²/h | 5,000 m²/h | 6,000 m²/h |
| Working slope | 45° | 45° | 45° |
| Remote range | 800 m (1,000 m with R1 remote) | 800 m (1,000 m with R1 remote) | 800 m (1,000 m with R1 remote) |
Field evidence
Real machines and field footage


Site conditions
Site rules come first
Use the mower only where the site owner and dam engineer allow it. Keep clear of active haul roads, unstable edges and wet seepage areas. The site’s safety plan decides the work zone; the remote range of up to 800 m lets the operator stand where that plan says.
Questions
FAQ
Can a remote mower cut tailings dam slopes?
Yes, on grassed faces up to 45° where the site owner and dam engineer approve the work. Keep clear of seepage and soft areas.
Why keep dam vegetation short?
Short cover lets inspectors see cracks, slumps, seepage and animal burrows. Your dam safety plan sets the cutting interval.
Which model is best for long embankments?
The ME1200D-48 for long, open faces; the ME1000D-48 where access is tighter.
How far can the operator stand from the machine?
Up to 800 m with the standard remote, or 1,000 m with the R1 remote, with a clear view.
What about dust?
Check the air filter daily and keep spare elements on site.
Keep reading
Related MERI pages
Get a configuration for your mine site
Send slope angle, length, vegetation and access. We reply within 24 hours.