1 / 6
Choose the technical sheet for the controller specification you need.
MERI · Controllers & electronics
Four control modules. One integrated controller. Combine two travel motor drives, conversion control and actuator control in one compact unit—with potted electronics and IP56 protection on both 110A and 190A versions.
Built for dusty, damp field work, the protected design reduces exposure to moisture and contamination. Fewer separate modules mean fewer inter-module connections and a cleaner installation.
Replacement parts and OEM integration enquiries welcome. Send the motor labels, receiver details and existing wiring layout.
Better protection. Smarter integration.
Protective potting and sealing shield the internal electronics from moisture, dust and contamination. Both specifications are IP56-rated, strengthening protection for everyday field conditions and reducing contamination-related failure risk.
Two travel motor drives, conversion control and actuator control are integrated in one enclosure. A centralized layout replaces a collection of separate boxes.
Reduce inter-module wiring, organize the control compartment and make the signal path easier to identify during installation and service.
Understand the difference
Four modules connected together to perform travel, command conversion and actuator control.
One integrated controller combines these four functions.
The external radio receiver connects to the matched integrated control unit. The receiver remains a separate component.
Left and right travel motor control with forward/reverse adjustment for compatible square-wave brushless DC motors.
Integrated linear actuator control for the machine’s compatible adjustment functions.
Engine start/stop and lighting control interfaces in the same integrated architecture.
One product family. Two specifications.
1,600W · IP56 · View technical sheet →
2,400W · IP56 · View technical sheet →
| Specification | 110A | 190A |
|---|---|---|
| Dimensions | 230 × 112 × 72mm | 260 × 140 × 70mm |
| Rated power | 1,600W | 2,400W |
| Overall current limit | 110A | 190A |
| Current limit per channel | Not listed in TDS | 60A |
| Compatible voltage | 24–72V DC | 24–72V DC |
| Protection | IP56 | IP56 |
| Control mode | Analog voltage | Analog voltage |
| Compatible motor | Square-wave BLDC | Square-wave BLDC |
The photographed 110A sample carries a 24V marking. Match the delivered controller configuration to the actual machine supply. Overall and per-channel limits are listed separately as supplied, without inferring continuous current or test conditions.
Dual-motor tracked travel systems for commercial vegetation-management equipment.
Integrated travel and auxiliary control for equipment with matching motors, signals and electrical requirements.
Assess a matched replacement or build a cleaner control architecture into a new machine.
Confirm the motor and feedback connections, receiver signals, actuator circuit, mounting and safety functions before replacing an existing system.
Integration removes the need for the four separate modules in the matched architecture; it does not mean every third-party machine is a direct plug-in fit.
Read the controller replacement checklist →Real connection demonstration
The demonstration shows a particular controller/receiver arrangement. Identify connector position and receiver channel separately.
Open the installation & wiring guide →Download the specification you are comparing. These are the same files available in MERI Support Downloads.
It integrates two travel motor drives, conversion control and actuator control into one unit. The external radio receiver remains separate.
Yes. MERI confirms IP56 protection for both the 110A and 190A specifications, with protective potting and sealing for the internal electronics.
No. They belong to the same integrated controller family but differ in overall current limit, rated power and dimensions. Use the matching TDS.
The receiver output, connector assignments and control functions must match the selected controller. Send its label and wiring layout for review.
Choose by motor type, voltage, current requirements, feedback wiring, receiver and auxiliary functions—not appearance alone.
Send motor and controller labels, receiver details, connector photos, the machine supply, quantity and destination.
Compare 110A and 190A for your machine or OEM project. Send your existing control layout for a compatibility check and parts quotation.