MERI video · Factory and field evidence
ME-RFM40-D Hydrostatic Brush-Clearing Demonstration
Watch the tracked ME-RFM40-D work through woody vegetation, then distinguish the forestry head from the alternative mowing deck when comparing equipment.
Request equipment and dealer informationWhat this video shows
This MERI clip identifies the ME-RFM40-D and shows its front forestry attachment working in wooded brush. It is useful for seeing the tracked carrier, front-head arrangement and surrounding growth; the short sequence does not measure hourly output or the largest material processed.
Key moments to watch
0:00 · Identify the platform
Read the ME-RFM40-D model label and observe the tracked carrier and front attachment.
0:03 · Follow the front-head arrangement
Watch how the front head sits ahead of the carrier as the camera changes its view.
0:08 · Compare the working vegetation
Observe the head beside standing brush and the material around the working pass. Use site photographs to compare your own vegetation.
Forestry head and mowing deck: keep the specifications separate
| Item | Formal specification | What to confirm for your site |
|---|---|---|
| Forestry attachment | 1200 mm working width; 27 tungsten-carbide teeth | Choose this head for the forestry work being discussed. |
| Alternative mowing deck | 1350 mm width; 30–90 mm cut in 3 positions | These are mowing-deck figures, not forestry-head cutting-height settings. |
| Engine alternatives | Yanmar 28.2 kW / 38.3 hp or Changchai 35 kW / 48 hp | Ask which engine is on the quoted machine; the clip does not establish its engine plate. |
| Drive | Hydrostatic tracked drive | Discuss surface condition, access and turning space. |
| Dimensions | 2900 × 1500 × 1300 mm with mowing deck | Request the overall envelope with your chosen forestry attachment. |
Use the footage to assess the attachment layout
The front forestry head and tracked carrier are the important combination in this demonstration. Look at the space ahead of the tracks, the surrounding woody growth and the approach to the work. Those observations help frame a useful equipment inquiry: describe whether your job is opening access, reducing scrub or maintaining vegetation after an initial clearance. A short edited pass is not a substitute for measuring the whole site.
This video concerns the ME-RFM40-D platform. Do not transfer its attachment widths or engine choices to the ME-RFM1000-D or ME-RFM1000-E simply because all are forestry machines. The linked family page is a starting point for the wider MERI range; ask specifically for ME-RFM40-D information when requesting a quotation.
Specify the head before comparing dimensions
The current technical sheet separates the 1200 mm forestry head from a 1350 mm mowing deck. The forestry head lists 27 tungsten-carbide teeth and a 2500 r/min rotor. The mowing deck lists a 3000 r/min rotor and a 30–90 mm cut setting. These figures describe different attachments and should remain in separate rows of your purchasing comparison.
The published machine dimensions are stated with the mowing deck. If your trailer, gate or storage space has a fixed clearance, send that measurement and ask for the assembled dimensions of the forestry configuration. Also describe how the machine will be loaded and unloaded. Comparing attachment width alone will not establish whether the complete carrier fits a route.
Send a site brief that supports a useful recommendation
Include photographs of typical vegetation, the largest stems you expect to encounter, exposed stones and the narrowest access. Record slopes in the direction of travel, soft ground and the turning areas. Identify pedestrian routes and other boundaries that must remain outside the working area. These details help MERI discuss a configuration without treating the conditions in this clip as your own site.
The sheet lists working and transport speeds separately. Neither is a clearing-rate promise: vegetation density, material and route layout affect the work. Request a model-specific quotation and the current technical sheet together, including the chosen engine and attachment, so everyone compares the same machine.
Frequently asked questions
Is the forestry head 1350 mm wide?
No. The ME-RFM40-D sheet lists a 1200 mm forestry head and a separate 1350 mm mowing deck.
Which engine appears in the video?
The model is identified, but the filmed engine plate is not established. The current sheet offers Yanmar and Changchai engine alternatives; confirm the quoted engine.
Does the clip show a measured production rate?
No. It shows the machine and working vegetation, without a timed area measurement.
What should I send with an inquiry?
Send vegetation photographs, stem sizes, access width, ground conditions and transport constraints, and name the ME-RFM40-D forestry configuration.
Discuss an ME-RFM40-D forestry configuration
Send your vegetation and access photographs, attachment choice and destination. Ask for the current model sheet and an itemized configuration.
Get a model-specific quotation