MERI video · Factory and field evidence
ME-SB560 Walk-Behind Snow Blower: Snow Discharge Video
See the operator guide the wheel-based ME-SB560 through snow while the chute directs the discharge to the side.
Request equipment and dealer informationWhat this video shows
This short demonstration shows the ME-SB560 clearing snow with an operator walking behind the machine. Watch the discharge plume, chute direction and the space available alongside the clearing pass. The ME-SB560 is a gasoline-powered, wheeled snow blower with a 560 mm clearing width and a 212 cc four-stroke engine.
Key moments to watch
0:00 · Follow the clearing pass
The operator walks behind the machine and guides it through the snowy area. Observe the relationship between the handle position, forward movement and snow entering the front housing.
0:02 · Watch the discharge direction
Snow leaves the chute to the side of the machine. Look at the available receiving space and consider where the snow would accumulate beside your own driveway or path.
0:05 · Identify the compact machine
The closer demonstration view shows the walk-behind layout. Use the model specifications below to compare the machine with your access width, turning space and operating requirements.
ME-SB560 specifications for this demonstration
| Item | ME-SB560 specification | What to check at your site |
|---|---|---|
| Operation | Walk-behind, wheeled machine | Provide room for the operator to guide and turn the machine. |
| Engine | 212 cc, single-cylinder, four-stroke gasoline | Plan access for the specified fuel and routine servicing. |
| Clearing width | 560 mm | Measure the narrowest opening and allow additional operating clearance. |
| Snow tires | 13 inches | Review the surface and traction conditions along the route. |
| Transmission | Six forward and two reverse gears | Consider maneuvering space at the ends of each pass. |
| Weight and starting | 66 kg; recoil start | Plan storage, movement to the work area and operator access. |
Plan the route around discharge space
The discharge plume is the main detail to follow in this clip. A clearing width tells you the nominal width of a pass, but the route also needs somewhere to receive the displaced snow. Identify the edges of the driveway, parked vehicles, pedestrian areas and any adjoining property before deciding the direction of travel.
For an initial site discussion, send the narrowest passage width, the length of the route and photographs showing the intended discharge side. Include tight corners and the storage entrance. These details help MERI discuss the machine in the context of your actual access constraints rather than relying on a width figure alone.
Keep clearing height and throwing distance separate
The formal ME-SB560 technical data sheet lists Snow Clearing Height as 50 mm and throwing distance as 12–16 m. These are separate entries. The 50 mm figure is the confirmed clearing-height designation; it must not be read as a throwing-distance value.
This short recording does not contain a measured throwing-distance setup or a documented snow-depth measurement. Use it to observe the discharge action and handling layout. Discuss the snow conditions and operating needs for your site alongside the technical data sheet when selecting equipment.
Choose between walk-behind and remote operation
ME-SB560 uses snow tires and a handle-guided operating position. It is a different machine from the tracked, remote-controlled ME-RS600 and the larger ME-RS. Keep the operating method, engine specification and weight attached to the correct model when comparing quotations.
The ME-SB560 product page contains the model photographs and its formal technical data sheet. For a purchase enquiry, identify the number of machines, destination and intended clearing routes. Ask for a current written quotation covering your requested configuration and delivery scope.
Frequently asked questions
Is ME-SB560 a remote-controlled tracked snow blower?
No. ME-SB560 is a walk-behind, wheeled gasoline snow blower. The ME-RS600 and ME-RS are separate remote-controlled models.
What are the engine size and clearing width?
The ME-SB560 technical data sheet specifies a 212 cc four-stroke gasoline engine and a 560 mm clearing width.
Does this clip measure the throwing distance?
No measured distance setup is shown. The technical data sheet lists 12–16 m; use the clip to observe snow discharge and the operator-guided layout.
Discuss your driveway or path with MERI
Send your access width, typical snow conditions, quantity and destination. Add photographs of turns and the discharge area so MERI can discuss the ME-SB560 against your operating needs.
Get a model-specific quotation