Boom Configuration (-B)
For greenhouses, row crops, nurseries and sites that need controlled horizontal coverage.
MERI RCS Series
Remote Control Agricultural Sprayers
Tracked spraying platforms for orchards, vineyards, greenhouses and row crops. Choose a 100–800 litre tank and match the boom or airblast configuration to the crop canopy, access width and required coverage.
One platform, two spraying systems
Configure the Sprayer for the Crop
Boom configurations apply spray across rows or low crops. Airblast configurations move droplets into orchard and vineyard canopies. Final pump, nozzle, fan and engine selection is confirmed for each order.
Airblast Configuration (-A)
For orchards and vineyards where airflow helps carry spray into dense or elevated canopies.
RCS800 High-Capacity Platform
An 800 litre tracked platform for longer work cycles and larger agricultural sites.
Configuration guide
Boom or Airblast: Which Fits the Crop?
The spray system should be selected by crop structure, canopy height and sensitivity—not by tank size alone.
Boom configuration · -B
Low Crops and Gentle, Uniform Coverage
- Pressure-fed nozzles distribute spray along a defined horizontal swath.
- Best suited to vegetables, row crops, flowers, nurseries, greenhouses and trellised crops.
- Lower air disturbance helps reduce crop impact during flowering and early fruit stages.
- Choose by row spacing, boom width, nozzle spacing and turning clearance.
Airblast configuration · -A
Tall or Dense Canopies and Greater Penetration
- Atomized spray is carried by fan airflow into and through the canopy.
- Best suited to orchards, vineyards, tall trees, dense foliage and large-area sanitation.
- Airflow improves vertical reach and coverage inside overlapping leaves.
- Choose by canopy height, canopy density, required reach, fan output and nozzle layout.
| Selection factor | Boom (-B) | Airblast (-A) |
|---|---|---|
| Primary crop structure | Low, evenly arranged or trellised crops | Tall trees and dense three-dimensional canopies |
| Spray delivery | Liquid pressure through boom-mounted nozzles | Atomized spray assisted by high-volume airflow |
| Coverage pattern | Controlled horizontal swath | Vertical, lateral and canopy-penetrating coverage |
| Typical applications | Greenhouses, vegetables, wheat, rice, flowers and nurseries | Apple, pear, citrus, walnut, vineyards, woodland and landscape trees |
| Key site data | Row spacing, boom width, crop height and turning room | Canopy height, density, required reach and airflow |
Quick model selection
Choose the Sprayer by Crop, Row Spacing and Work Cycle
Start with the crop and available passage width, then choose tank capacity by continuous working time, refill access and canopy demand.
Vegetables and narrow rows
Start with ME-RCS100
- The compact platform is the first choice where larger machines cannot pass between vegetable rows.
- Use a boom configuration for low crops; boom height, boom width and nozzle quantity can be matched to the crop layout.
- Confirm the narrowest row spacing and turning clearance before ordering.
Orchards under approximately 100 mu
Compare ME-RCS120 to ME-RCS400
- Choose 120 L for narrower rows, shorter work cycles and sites with convenient refill water.
- Choose 200–300 L when access width allows and a balance between manoeuvrability and operating time is needed.
- Choose 400 L for wider rows, longer continuous work, less convenient refilling or larger and denser canopies.
| Site condition | Starting recommendation | Confirm before ordering |
|---|---|---|
| Narrow vegetable rows | ME-RCS100 boom | Row spacing, turning room, boom width and nozzle layout |
| Orchard, narrow access or easy refilling | ME-RCS120 airblast | Chassis passage width, canopy height and required work cycle |
| Orchard, balanced capacity and manoeuvrability | ME-RCS200 or ME-RCS300 airblast | Row width, refill distance, liquid demand and canopy density |
| Orchard, longer work cycle or dense canopy | ME-RCS400 airblast | 960 mm chassis width, turning clearance and refill plan |
| Larger sites and extended work cycles | ME-RCS500 or ME-RCS800 | Access width, ground conditions, capacity and transport limits |
✓
Available customization: boom height, boom width, nozzle quantity, chassis width and engine selection are confirmed for the crop and site. Share crop type, row spacing, canopy size, working area and refill conditions for a factory recommendation.
Model range
RCS Series Specifications
All models use a 200 metre remote control range. Values marked configuration dependent are finalized with the selected engine, pump, fan and spray system.
| Model | Tank | Dimensions (L×W×H) | Chassis / clearance | Weight | Travel speed | Remote | TDS |
|---|---|---|---|---|---|---|---|
| ME-RCS100 | 100 L | 1500×450×1000 mm | 400 mm chassis width | 150 kg | 80 m/min | 200 m | |
| ME-RCS120 | 120 L | 1500×620×850 mm | 520 mm chassis width | 190 kg | 80 m/min | 200 m | |
| ME-RCS200 | 200 L | 1650×850×960 mm | 700 mm chassis width | 280 kg | 80 m/min | 200 m | |
| ME-RCS300 | 300 L | 1720×900×1140 mm | 900 mm chassis width | 351 kg | 60–80 m/min | 200 m | |
| ME-RCS400 | 400 L | 1850×960×1140 mm | 960 mm chassis width | 420 kg | 60–80 m/min | 200 m | |
| ME-RCS500 | 500 L | 2000×980×1170 mm | 980 mm chassis width | 465 kg | 60–80 m/min | 200 m | |
| ME-RCS800 | 800 L | 2200×1100×1060 mm | 1100 mm chassis width | 350 kg net | 100–133 m/min | 200 m |
Application planning
Built Around the Crop and Site
These application images are visualizations for configuration planning. Final suitability depends on crop height, row spacing, chemical requirements and local operating rules.
Row Crops
Boom coverage for open rows and low crop canopies.
Greenhouses
Tracked mobility and remote operation for restricted access routes.
Orchards and Vineyards
Air-assisted coverage for vertical and dense canopies.
Core equipment
Details That Define the Configuration
Airblast Fan System
Fan size and airflow are selected for canopy height and density.
Pump and Plumbing
Pump, filters, nozzles and plumbing are matched to the chemical and coverage plan.
Model coding: use -B for boom and -A for airblast after tank capacity and configuration are confirmed.
Tell Us What You Need to Spray
Send crop type, canopy height, row spacing, site slope and preferred tank capacity. MERI will recommend the appropriate model and spray configuration.