
Short answer: Asparagus fern feeds the crowns through summer, so it should stand until it has died back. Cut and chop it in late autumn or early spring, before spears emerge, at a height that clears the crowns. A flail chops the stems finely so they break down. A tracked remote mower suits small, sloping or wet fields.
Why timing matters
Vegetable extension services answer this question every year. Cutting fern while it is still green removes the leaves that store energy in the crowns. Most advice is to wait until the fern has yellowed or been killed by frost, then remove it before the next season’s spears come up.
Some growers cut in autumn to reduce disease carry-over; others leave the fern over winter to catch snow and protect crowns. Follow your local adviser.
Cutting height and crowns
Asparagus crowns sit below the soil surface, but spears can emerge early in a warm spell. Cut high enough to stay above the soil and clear any early spears, and never scalp the beds. MERI flail models have a 30–300 mm cutting height, which allows a safe height on ridged beds.

Flail or rotary
| Factor | Flail | Rotary |
|---|---|---|
| Chopping of stems | Fine pieces that break down faster | Longer pieces |
| Thrown debris | Lower | Higher |
| Ridged beds | Follows the surface well | Can scalp ridges |
| Tough, dry stems | Handles well | Can wrap and leave strips |
General comparison.
Where a remote mower helps
Many asparagus plantings are small blocks on light, sloping soils, or fields that stay wet in early spring. A tracked remote mower can cut the fern without a tractor compacting the beds. The operator walks the headland. Flail models cut 800–1,200 mm wide; match the deck to the bed spacing.
48 V MERI models use two 1,000 W travel motors, and the tracks keep grip on soft spring soil.
A simple plan
- Wait for the fern to die back fully.
- Check the field for early spears in mild spells.
- Set the deck height above the beds.
- Mow in the direction of the rows.
- Let the chopped material dry and break down.
Common mistakes
- Cutting green fern in summer.
- Mowing too low and damaging the bed surface.
- Waiting until spears are up and cutting them off.
- Driving heavy kit on wet beds in spring.
Field layout and machine width
Measure the bed spacing and the width of the ridges before choosing a deck. A deck that straddles one bed and part of the next leaves uneven heights. Many growers mow one bed per pass and turn on the headland. On small fields, the remote mower can work bed by bed while the operator stays at the end of the row, which keeps foot traffic off the beds as well.
If the field has trellis posts or irrigation lines, mark them first and lift the deck near them.
Disease and debris
Old fern can carry disease from one season to the next. Chopping it finely and letting it break down helps. Some advisers suggest removing or burying fern in problem fields; follow local advice for your crop.
Records
Note the date you cut, the condition of the fern and the first spear date. Over a few seasons this gives a reliable window for your field.
A worked example
A grower has two small asparagus blocks on a light, sloping field. The fern dies back fully by early winter, but the field is too wet to drive with a tractor until spring. In a dry spell in late winter, the grower checks the beds for early spears and finds none. A tracked remote flail mower then chops the old fern in passes along the beds, with the deck set well above the ridges. The fine material is left to break down. The grower notes the cut date and the first spear date a few weeks later.
Checking for early spears
In a mild spell, walk a sample of beds before mowing, especially on warm, south-facing ground. If spears are already showing, raise the deck further or mow those beds first thing on a cold morning, when growth is slow.
Related MERI pages
- Cutting height by model
- ME1000-48 remote flail mower
- Crop stalk shredding after harvest
- Remote mowing time calculator
- Remote mower for farms and pasture
Frequently asked questions
When should asparagus fern be cut?
After it has died back, in late autumn or early spring, before spears emerge. Follow local advice.
How high should I cut asparagus fern?
High enough to clear the soil surface and any early spears. MERI flail models adjust from 30 to 300 mm.
Is a flail better than a rotary for fern?
A flail chops stems finely and throws less debris, which suits fern and ridged beds.
Can a remote mower cut fern on wet spring fields?
Often yes. The tracked machine spreads its weight and the operator walks the headland.
Send us your site details
Tell us the job, area, slope and country. MERI replies within 24 hours.
Need a mower recommendation for your terrain or project?
Get a Quote