ATEX RJ705 alternative
ATEX RJ705 vs MERI Remote Slope Mowers
The ATEX RJ705 is a Japanese hybrid remote brush cutter with a 700 mm twin-blade cut. MERI builds tracked remote mowers from 550 to 1200 mm for dealers and contractors.
Closest MERI matches: ME650-T for short grass, ME800-48 for tall grass.
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Summary
Short answer
The RJ705 suits short, regular cutting on paddy banks and orchard slopes, with a 45–95 mm cut. MERI covers the same work and adds flail models that cut up to 300 mm high for overgrown sites.
Both makers publish a 45° slope figure.
At a glance
ATEX RJ705 vs MERI side by side
| Decision point | ATEX RJ705 | MERI ME650-T | MERI ME800-48 |
|---|---|---|---|
| Cutting width | 700 mm, twin blades | 650 mm, flat blades | 800 mm, flail |
| Power | Gas engine for cutting, electric travel; 13.4 kW (18.2 PS) at 3,600 rpm | Loncin 224, 7.5 HP; 24 V electric tracks | Loncin 459, 18 HP; 48 V electric tracks |
| Cutting height | 45–95 mm, 10 mm steps | 20–200 mm | 30–300 mm |
| Published slope figure | 45° | 45° | 45° |
| Work rate | 13.3 a/h (about 1,330 m²/h), maker’s own measurement | Site-dependent | 4,000 m²/h |
| Weight | Not stated on English product page | 200 kg | 402 kg |
| Remote range | Not stated on English product page | 800 m | 800 m |
Comparison
Where ATEX is stronger
Twin blades.
ATEX says twin blades cut shorter, and swapping upper and lower blades doubles blade life.
Engine balance.
The engine stays level automatically up to 20° of tilt.
Easy cleaning.
The deck can be washed with tap water while the blades turn.
Japanese dealer support.
Why MERI
Where MERI fits better

- Overgrown sites. Flail models cut up to 300 mm high.
- Wider options. 800, 1000 and 1200 mm flail mowers.
- Published work rate. 4,000 m²/h for the ME800-48.
- Remote range. 800 m on the standard remote.
- Diesel models. For markets that prefer diesel.
Before you ask for a quote
What to send MERI for a quote
Typical site: paddy banks, orchards, roadsides or solar farms.
Grass height between cuts.
Steepest slope.
Units per year and destination port.
Questions
FAQ
Which MERI model is closest to the ATEX RJ705?
The ME650-T for short grass (650 mm, flat blades). The ME800-48 if grass is often tall (800 mm flail, 30–300 mm cutting height).
Do both machines handle 45° slopes?
Both makers publish 45°. Each tests under its own conditions.
Can MERI supply dealers in Japan?
Yes. See our Japan page and ask about voltage, documents and shipping.
What is the minimum order for dealers?
One unit for a sample. Wholesale pricing starts from 5 units.
How fast can MERI ship?
One to ten units leave about 7 days after payment. Larger orders take 7–15 days. The 46 most-used spare-part types ship within 48 hours.
Keep reading
Related MERI pages
Comparing ATEX and MERI for your market? Get a quote
Send your sites and units. We reply within 24 hours.