Service reference · ME-RFM1000-E
ME-RFM1000-E Service Data: Battery, Motors, Charging and Run Time
The ME-RFM1000-E is the battery-electric forestry mulcher. There is no engine to service, but the battery, motors and cooling need care. Here are the figures from the TDS.
72 V, 430 Ah LiFePO4 battery, 30 kWh. 9,000 W water-cooled cutter motor and water-cooled controller. About 7 h operating time; charging about 6/12 h (dual charging).
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Electrics
Battery, motors and charging
| Item | Figure | Service note |
|---|---|---|
| System voltage | 72 V | Only trained staff should open the battery system |
| Battery | LiFePO4, 430 Ah, 30 kWh | Store part-charged in a dry place out of season |
| Cutter motor | 9,000 W, water-cooled | Check coolant and hoses before each shift |
| Motor controller | Water-cooled | Keep radiator fins clear of chips and dust |
| Operating time | Approx. 7 h | Plan charging between shifts |
| Charging time | Approx. 6/12 h (dual charging) | Check charger cables and plugs for damage |
| Control response | 50 ms; closed-loop speed correction | Speed modes optional |
Working head
Rotor, limits and sizes
| Item | Figure |
|---|---|
| Rotor speed | 3,450 r/min |
| Working width | 1,000 mm |
| Cutter lift range | 0–400 mm |
| Travel speed | 1 m/s |
| Remote range | 200 m |
| Gradeability / working angle | 45° / 35° |
| Machine size | 2,080 × 1,250 × 640 mm |
| Net weight | 882 kg |
What it means for you
Look after the electrics
Coolant
Motor and controller are water-cooled.
Clean radiator
Chips and dust block airflow.
Charging plan
About 7 h work per charge.
Storage
Dry place, battery not flat.

Diesel or electric
Two power options
For long days far from power, compare the diesel ME-RFM1000-D service data. Diesel models are not supplied to the US market.
Questions
Frequently asked questions
What battery does the ME-RFM1000-E use?
A 72 V, 430 Ah LiFePO4 battery with 30 kWh of energy.
How long does it run on one charge?
About 7 hours, according to the TDS.
How long does charging take?
About 6/12 h (dual charging), as listed in the TDS.
How is the cutter motor cooled?
By water. The motor controller is water-cooled too.
What slope can it work on?
It climbs 45° and works at up to 35°.
Keep reading
Related MERI resources
Need parts for an ME-RFM1000-E?
Send the serial number and the part. We reply within 24 hours.