Model and application guide

ME1000-48 for Municipal Verges and Slopes

Town verges, roundabout banks and drainage slopes are often too steep or too close to traffic for ride-on mowers. The ME1000-48 pairs a 1000 mm flail deck with a gasoline engine that is easy to refuel from the council depot.

Best fit: council and contractor teams mowing verges, banks and wildflower strips with long or mixed growth.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI tracked flail mower cutting tall grass beside a paved verge
MERI flail mower on a verge beside a paved surface
1000 mmME1000-48 cutting width
5,000 m²/hRated work rate, up to
18 hpLONCIN 459 gasoline engine
2,000 W48 V electric track drive
424 kgMachine weight
1150 mmOverall machine width

Summary

Short answer

Choose the ME1000-48 for verges and banks with long or mixed growth, such as wildflower strips cut once or twice a year. The flail deck cuts 1000 mm and handles long grass that a flat-blade mower cannot.

It runs on gasoline, which most council depots already stock. The 48 V, 2,000 W drive gives pulling power on steep banks. If your fleet runs on diesel, the ME1000D-48 has the same deck and width.

Fit check

Will the ME1000-48 suit your verges?

ME1000-48 figures from the MERI product page and ME1000-48 TDS. Site checks are guidance; follow local traffic management rules.
Site checkME1000-48 figureWhat to measure
Verge width and access1150 mm overall widthNarrowest verge strip, gate or gap between barriers and kerbs.
Slope45° rated maximumSteepest bank or roundabout face and any soft ground near drains.
Vegetation40 flail blades, 30–300 mm heightGrass height at cutting time, wildflower stems and litter.
Output per dayUp to 5,000 m²/h ratedVerge area per traffic closure. Short strips and signs reduce real output.
Transport424 kg, 1750 mm longTrailer payload and a safe unloading point off the road.
Operator position800 m remote rangeA protected standing point with a clear view, away from live traffic.

Why this model

Why the ME1000-48 suits verge work

MERI remote flail mower cutting a tall grass verge under a power line
Long verge growth after the first cut. Plan cutting height for sight lines.
  • Flail cutting. 40 flail blades for long and mixed growth.
  • Rated output. Up to 5,000 m² per hour on open banks.
  • Gasoline power. LONCIN 459, 18 hp, 5.5 L fuel tank.
  • 48 V drive. 2,000 W electric track drive for steep banks.
  • Height control. 30–300 mm for sight lines or habitat rules.
  • Operator away from traffic. Remote range up to 800 m.

Other MERI options

ME1000-48 vs ME1000D-48 vs ME1200-48 on municipal verges

Choose by fuel at the depot, access width and verge area per closure.

Figures from the MERI product pages and model TDS.
PointME1000-48ME1000D-48ME1200-48
Cutting width1000 mm1000 mm1200 mm
Rated work rateUp to 5,000 m²/hUp to 5,000 m²/hUp to 6,000 m²/h
Overall size (L × W × H)1750 × 1150 × 920 mm1750 × 1150 × 920 mm1750 × 1350 × 920 mm
Weight424 kg424 kg445 kg
EngineLONCIN 459 gasoline, 18 hpKOOP 195 diesel, 15 hpLONCIN 459 gasoline, 18 hp
Best verge useGasoline depots, mixed vergesDiesel fleets, long shiftsWide open banks

Limits

Where the ME1000-48 is not the right choice

Fine lawn finish.

For park lawns and banks cut on a short cycle, a flat-blade T-Series mower such as the ME650-T leaves a tidier finish.

Very narrow strips.

Where access is under 1150 mm plus margin, the 950 mm wide ME800-48 or ME800D-48 fits better.

Diesel fleets.

If the depot only stocks diesel, choose the ME1000D-48.

Before you ask for a quote

What to send MERI

Verge width and narrowest access point.

Steepest bank and ground condition.

Cutting cycle and vegetation type.

Units per year and destination port.

Questions

FAQ

Can the ME1000-48 cut long wildflower verges?

Yes. The 40 flail blades cut long and mixed growth, and the cutting height adjusts from 30 to 300 mm.

How much verge can it cover per day?

The rated maximum is 5,000 m² per hour on open ground. Short strips, signs and traffic closures reduce this, so plan from a test day.

Gasoline or diesel for council work?

The ME1000-48 uses a LONCIN 459 gasoline engine (18 hp), a good fit where the depot stocks gasoline. For diesel fleets, the ME1000D-48 has the same deck and width.

Where does the operator stand?

The remote range is up to 800 m. Choose a protected position with a clear view, away from live traffic, and follow local traffic management rules.

What is the minimum order?

One unit for a sample. Wholesale pricing starts from 5 units.

Keep reading

Related MERI pages

Send your verge details for an ME1000-48 quote

Tell us verge width, steepest bank, area and units. We reply within 24 hours.