Model and application guide
ME1200D-48 for Levees and Dam Slopes: Wide-Cut Diesel Mowing
Levees and earth dams have long, even slopes where cutting width decides how fast the job is done. The ME1200D-48 is the widest MERI mower: 1200 mm flail cut, rated up to 6,000 m² per hour.
Best fit: long flood banks, dam faces and dyke slopes mowed by contractors or water authorities on long working days.
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Summary
Short answer
Choose the ME1200D-48 when the bank is long and open and output per day matters most. Its 1200 mm deck covers 20% more width per pass than a 1000 mm deck, and diesel suits contractors who already run diesel fleets.
The 48V drive (2,000 W) gives more pulling power on steep faces than the 24V ME1200D-24. The machine is 1350 mm wide and weighs 445 kg, so check crest access and trailer payload first.
Fit check
Will the ME1200D-48 suit your levee?
| Site check | ME1200D-48 figure | What to measure |
|---|---|---|
| Slope | 45° rated maximum | Steepest face, wet or soft sections and animal burrows. |
| Access gates and crest | 1350 mm overall width | Narrowest gate, stile or crest track on the route to the bank. |
| Transport | 445 kg, 1750 mm long | Trailer payload, ramp length and unloading point. |
| Vegetation | 48 flail blades, 30–300 mm height | Grass height and any reed, bramble or saplings at cutting time. |
| Daily output | Up to 6,000 m²/h rated | Bank length × slope length. Real output is lower with turns and obstacles. |
| Operator position | 800 m remote range | A safe standing point on the crest or toe with a clear view. |
Why this model
Why the ME1200D-48 suits levee mowing

- Widest MERI deck. 1200 mm with 48 flail blades.
- Highest rated output. Up to 6,000 m² per hour on open banks.
- Diesel for long days. KOOP 195, 15 hp, 5.5 L fuel tank.
- 48V drive. 2,000 W electric track drive for steep faces.
- Operator off the slope. Remote range up to 800 m.
- Grass height control. 30–300 mm, so the bank can be left at inspection height.
Other MERI options
ME1200D-48 vs ME1000D-48 vs ME1200D-24 on a levee
Choose by bank length, access width and how steep the faces are.
| Point | ME1200D-48 | ME1000D-48 | ME1200D-24 |
|---|---|---|---|
| Cutting width | 1200 mm | 1000 mm | 1200 mm |
| Rated work rate | Up to 6,000 m²/h | Up to 5,000 m²/h | Up to 6,000 m²/h |
| Overall size (L × W × H) | 1750 × 1350 × 920 mm | 1750 × 1150 × 920 mm | 1650 × 1350 × 920 mm |
| Weight | 445 kg | 424 kg | 386 kg |
| Drive system | 48 V, 2,000 W | 48 V, 2,000 W | 24 V, 1,800 W |
| Engine | KOOP 195 diesel, 15 hp | KOOP 195 diesel, 15 hp | KOOP 195 diesel, 15 hp |
| Best levee use | Long open banks, steep faces | Narrower access, mixed banks | Gentler banks, lighter transport |
Limits
Where the ME1200D-48 is not the right choice
Narrow access.
At 1350 mm wide it may not pass narrow gates. The ME1000D-48 is 1150 mm wide.
Short, broken banks.
With many obstacles and turns, a narrower deck loses less time.
Gentle slopes and light trailers.
The 24V ME1200D-24 has the same cut and is 59 kg lighter.
Before you ask for a quote
What to send MERI
Bank length and slope length per face.
Steepest face and ground condition.
Narrowest gate or crest access.
Units per year and destination port.
Questions
FAQ
How much levee can the ME1200D-48 mow in a day?
The rated maximum is 6,000 m² per hour on open ground. Turns, obstacles and slope reduce this, so measure a test section on your own bank.
Can it work on steep dam faces?
It is rated for slopes up to 45° under suitable conditions. Check wet sections, burrows and soft ground before work, and keep the operator in a safe position.
Why diesel for levee work?
The KOOP 195 diesel (15 hp) suits long working days and fleets that already run diesel. A gasoline version with the same deck is the ME1200-48.
What is the difference from the ME1200D-24?
Both cut 1200 mm with the same diesel engine. The ME1200D-48 has 48 V, 2,000 W drive for more pulling power and weighs 445 kg; the ME1200D-24 has 24 V, 1,800 W drive and weighs 386 kg.
How fast can MERI ship?
One to ten units leave about 7 days after payment. Larger orders take 7–15 days. The 46 most-used spare-part types ship within 48 hours.
Keep reading
Related MERI pages
Send your bank length for an ME1200D-48 quote
Tell us bank length, steepest face, access width and units. We reply within 24 hours.