Compare · 48 V mowers

ME1000-48 vs ME1200-48: 1,000 or 1,200 mm Cutting Width?

The two models share the engine, drive and controls. The 200 mm of extra width changes work rate, machine width and weight, and that decides which fits your site.

ME1200-48 cuts 6,000 m²/h (reference) with 48 blades; it is 1,350 mm wide and 445 kg. ME1000-48 cuts 5,000 m²/h with 40 blades; it is 1,150 mm wide and 424 kg. Same Loncin 459, 18 hp, 48 V / 2,000 W drive.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI ME1000-48 gasoline remote control mower
ME1000-48
5,000 / 6,000 m²/hReference rates
40 / 48Blades
1,150 / 1,350 mmMachine width
424 / 445 kgNet weight
18 hpBoth

Compare

Side by side

From the ME1000-48 and ME1200-48 TDS.
ItemME1000-48ME1200-48
Cutting width1000 mm1200 mm
Blades4048
Reference work rate5,000 m²/h6,000 m²/h
Machine size1750 × 1150 × 920 mm1750 × 1350 × 920 mm
Net / gross weight424 / 494 kg445 / 516 kg
Packing size1850 × 1250 × 1070 mm1850 × 1450 × 1070 mm
EngineLoncin 459, 18 hpLoncin 459, 18 hp
Drive48 V, 2,000 W48 V, 2,000 W
Cutting height30–300 mm30–300 mm

Time

What the extra width saves

Calculated at reference rates. Real sites are slower; the ratio stays about the same on open ground.
Area per cutME1000-48 at 5,000 m²/hME1200-48 at 6,000 m²/h
5 ha10 h8.3 h
20 ha40 h33.3 h
50 ha100 h83.3 h

What it means for you

Which one

Open land, large sites

ME1200-48 saves about one hour in six.

Rows under 1.5 m

ME1000-48 is 200 mm narrower.

Gates and trailers

Check the 1,150 vs 1,350 mm width.

Same parts

Engine, drive and controls are shared.

MERI ME1200 remote control mower

Width

When wider is slower

Between narrow rows or solar posts, a wider deck may not fit, or needs more careful passes. Measure the narrowest gap first; then pick the widest machine that passes it with room to steer.

Questions

Frequently asked questions

How much faster is the ME1200-48?

Its reference rate is 6,000 m²/h against 5,000 m²/h, about 20% more area per hour.

How much wider is the ME1200-48?

1,350 mm against 1,150 mm overall.

Do they use the same engine?

Yes, the Loncin 459, 18 hp, with 48 V / 2,000 W travel drive.

Which is heavier?

The ME1200-48: 445 kg net against 424 kg.

Is there a diesel version?

Yes: ME1000D-48 and ME1200D-48. Diesel models are not supplied to the US market.

Keep reading

Related MERI resources

Not sure which width?

Send the narrowest gap, slope and area. We reply within 24 hours.