Model and application guide

ME800-24 for Orchards: Light 24V Flail Mower for Rough Cover

The ME800-24 is the lightest MERI flail mower. Its 800 mm deck with 30 flail blades cuts rough orchard cover, and at 950 mm overall width it fits rows that wider decks cannot.

Best fit: orchard rows with long or mixed grass, hillside blocks and sites where the mower is trailered between farms.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI tracked flail mower working in grass between orchard trees
MERI flail mower in an orchard row
800 mmME800-24 cutting width
950 mmOverall machine width
355 kgMachine weight
4,000 m²/hRated work rate, up to
30–300 mmCutting height range
45°Rated maximum slope

Summary

Short answer

Choose the ME800-24 when the orchard floor has rough or long cover that flat blades cannot handle, and the rows are too narrow for a 1000 mm deck. The flail deck cuts 800 mm and the machine is 950 mm wide overall.

It weighs 355 kg, 47 kg less than the 48V ME800-48. That makes it easier to trailer between blocks. Choose the 48V model only if your slopes are steep and heavy work needs more drive power.

Fit check

Will the ME800-24 fit your orchard?

ME800-24 figures from the MERI product page and ME800-24 TDS. Site checks are guidance; confirm with MERI before ordering.
Site checkME800-24 figureWhat to measure
Row gap950 mm overall widthNarrowest gap between trunks or props at track height, with a margin each side.
Low branches920 mm machine heightHeight of the lowest branches over the drive line. Lower canopies need the 500 mm high T-Series.
Cover type30 flail blades, 30–300 mm heightGrass height, weeds and any woody stems at cutting time.
Headland turn1650 mm machine lengthTurning space between the last tree and the fence or track.
Slope45° rated maximumSteepest up-slope and cross-slope in the block.
Daily areaUp to 4,000 m²/h ratedHectares per visit. Real output is lower with short rows and many turns.

Why this model

Why the ME800-24 suits orchard work

MERI ME800-24 gasoline remote control flail mower, side view
MERI ME800-24 flail mower.
  • Flail cutting. 30 flail blades handle rough cover and mixed weeds.
  • Narrow body. 950 mm overall width, the narrowest MERI flail model.
  • Light 24V drive. 355 kg with 1,800 W electric track drive.
  • Height range. 30–300 mm, so you can leave taller cover where needed.
  • Gasoline power. LONCIN 459 engine, 18 hp, 5.5 L fuel tank.
  • Remote from the headland. Remote range up to 800 m.

Other MERI options

ME800-24 vs ME800-48 vs ME550-T in an orchard

Choose by canopy height, cover type and how steep the blocks are.

Figures from the MERI product pages and model TDS.
PointME800-24ME800-48ME550-T
Cutting width800 mm800 mm550 mm
Overall size (L × W × H)1650 × 950 × 920 mm1750 × 950 × 920 mm1100 × 1000 × 500 mm
Weight355 kg402 kg160 kg
Drive system24 V, 1,800 W48 V, 2,000 W24 V, 1,100 W
Cutting system30 flail blades30 flail blades2 flat blades
Rated work rateUp to 4,000 m²/hUp to 4,000 m²/hSite dependent
Best orchard useRough cover, normal canopySteep blocks, heavy workLow canopy, maintained grass

Limits

Where the ME800-24 is not the right choice

Very low canopy.

At 920 mm high it needs clear space under branches. For low-hanging trees use the ME550-T or ME650-T (500 mm high).

Large open blocks.

On wide rows a 1000 or 1200 mm deck covers more ground. Compare the ME1000-24.

Steep, heavy work all day.

The 48V ME800-48 has more drive power for steep slopes.

Before you ask for a quote

What to send MERI

Row spacing and narrowest gap at track height.

Lowest branch height over the drive line.

Cover type and steepest slope.

Units per year and destination port.

Questions

FAQ

Will the ME800-24 fit between my tree rows?

The machine is 950 mm wide overall and cuts 800 mm. Measure the narrowest gap between trunks at track height and leave a margin on each side.

Will it pass under low branches?

The ME800-24 is 920 mm high. If branches hang lower over the drive line, choose a T-Series mower, which is 500 mm high.

ME800-24 or ME800-48?

Both cut 800 mm. The ME800-24 weighs 355 kg with 1,800 W drive; the ME800-48 weighs 402 kg with 2,000 W drive for steeper, heavier work. Choose 24V when lighter weight and easier transport matter most.

How much orchard can it cover in a day?

The rated maximum is 4,000 m² per hour. Short rows, turns and slopes reduce this, so plan from a test day on your own block.

What is the minimum order?

One unit for a sample. Wholesale pricing starts from 5 units.

Keep reading

Related MERI pages

Send your row spacing for an ME800-24 quote

Tell us the row gap, lowest branch height, slope and units. We reply within 24 hours.