Model and application guide

ME900-T for Solar Farms: Low-Profile Mowing Under Panels

The ME900-T is the widest MERI T-Series mower. It cuts 900 mm but stands only 500 mm high, so it can mow under low panel edges that a 920 mm high flail mower cannot pass.

Best fit: maintained grass under fixed-tilt rows and between trackers on utility and commercial solar sites.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI tracked remote mower cutting grass at a low solar panel edge
MERI tracked mower at a low solar panel edge
900 mmME900-T cutting width
500 mmMachine height
1300 mmOverall machine width
280 kgMachine weight
16 hpLONCIN 452 gasoline engine
800 mRemote range, up to

Summary

Short answer

Choose the ME900-T when grass on the site is kept short and the lowest panel edge is low. At 500 mm high it is 420 mm lower than MERI flail mowers, and its 900 mm deck covers more ground per pass than the ME650-T.

It is 1300 mm wide overall, so it needs a clear lane of that width plus margin between pile rows. Where rows are tighter, the ME650-T (1000 mm wide) is the better choice.

Fit check

Will the ME900-T fit your array?

ME900-T figures from the MERI product page and ME900-T TDS. Site checks are guidance; confirm with MERI before ordering.
Site checkME900-T figureWhat to measure
Lowest panel edge500 mm machine heightLowest module edge above ground, including trackers at their lowest stow angle.
Clear lane width1300 mm overall widthClear width between piles, cable trays and inverter skids.
Turning at row ends1450 mm machine lengthSpace between the last table and the fence or access road.
Grass condition20–200 mm cutting height, 2 flat bladesGrass height between visits. Flat blades suit maintained grass, not overgrown woody growth.
Ground and slope45° rated maximumSteepest bank on site, drainage swales and soft ground after rain.
Operator position800 m remote rangeWhere the operator can stand with a clear view, away from live cables.

Why this model

Why the ME900-T suits solar maintenance

MERI tracked remote mower working under a solar panel frame
Panel frames and piles set the clear lane. Measure them before choosing a model.
  • Low body. 500 mm high, so it can work under panel edges that stop taller mowers.
  • Wide flat-blade deck. 900 mm, the widest MERI T-Series cut.
  • Tidy finish. Two flat blades leave short, even grass that shades panels less.
  • Gasoline power. LONCIN 452 engine, 16 hp; 1300 W electric track drive.
  • Remote work. Range up to 800 m, so the operator stays outside the rows.
  • Fleet support. The 46 most-used spare-part types ship within 48 hours.

Other MERI options

ME900-T vs ME650-T vs ME800-48 on a solar site

Choose by panel height, lane width and how long the grass grows between visits.

Figures from the MERI product pages and model TDS.
PointME900-TME650-TME800-48
Cutting width900 mm650 mm800 mm
Overall size (L × W × H)1450 × 1300 × 500 mmWider than ME550-T; confirm with MERI1750 × 950 × 920 mm
Weight280 kg200 kg402 kg
Cutting system2 flat blades2 flat blades30 flail blades
EngineLONCIN 452, 16 hpLONCIN 224, 7.5 hpLONCIN 459, 18 hp
Best solar useLow panels, wide lanes, regular cuttingLow panels, tight lanesOvergrown rows, fence lines, banks

Limits

Where the ME900-T is not the right choice

Overgrown sites.

If grass has grown tall or woody, a flail mower such as the ME800-48 handles it better. Return to the ME900-T once it is under control.

Tight lanes.

Lanes narrower than about 1300 mm plus margin need the ME650-T.

Around piles and cable entries.

Hand trimming is still needed close to piles, skids and cable entries.

Before you ask for a quote

What to send MERI

Lowest panel edge height and tracker stow angle.

Clear lane width between rows.

Site area in hectares and grass growth between visits.

Units per year and destination port.

Questions

FAQ

Will the ME900-T fit under my panels?

The ME900-T is 500 mm high. If the lowest panel edge, at the trackers’ lowest angle, is clearly above that, it can pass under. Send us the height and we will confirm.

How wide a lane does it need?

The machine is 1300 mm wide overall, though it cuts 900 mm. Measure the clear width between piles and leave a margin on each side.

Why a flat-blade mower and not a flail mower?

Flat blades give a short, even finish on maintained grass, and the ME900-T body is much lower (500 mm vs 920 mm). For overgrown or woody growth, a flail model is the better tool.

Can one operator run it across a large site?

The remote range is up to 800 m. Keep the machine in clear view and follow the site’s safety rules around live equipment.

How fast can MERI ship?

One to ten units leave about 7 days after payment. Larger orders take 7–15 days. The 46 most-used spare-part types ship within 48 hours.

Keep reading

Related MERI pages

Send your panel height for an ME900-T quote

Tell us the lowest panel edge, lane width, site size and units. We reply within 24 hours.