Pulleys

Belt Pulleys and Tensioner Pulley for Remote Mowers

Pulleys and the tensioner keep the belts running true. A worn pulley chews through new belts, so check it whenever you change a belt.

Fits: MERI remote mowers. Confirm by machine nameplate model and part number.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
Diesel engine bay of a MERI remote mower showing the engine, belt cover and lift actuator
Diesel engine bay: engine, belt cover and lift actuator.
46Common spare-part types stocked
48 hCommon parts dispatched
100+Countries exported
CECertified
ISO 9001Quality management
24 hReply time

Summary

Short answer

The catalog lists three belt pulleys: 130 x 2 (MERI-P11), 120 x 3 (MERI-P12) and 150 x 2 (MERI-P13). It also lists the Belt Tensioner Pulley (MERI-P32).

The tensioner pulley is a priority-A wear part; MERI suggests two per dealer. The three belt pulleys are priority-B service parts.

At a glance

Part numbers, fit and check points

Part numbers and names: MERI Spare Parts Catalog (MERI-P01 to MERI-P46). Stock priority and opening quantities: MERI Recommended Spare Parts Package, per dealer location. Check points: MERI operation and maintenance notes and the operator manual. Prices are quoted per order.
Part numberPart nameFitsDealer stockCheck points
MERI-P11130 x 2 Belt PulleyConfirm by machine nameplate model and part numberPriority B (service part); suggested opening stock 1 pcCheck with the belts; inspect for looseness after work.
MERI-P12120 x 3 Belt PulleyConfirm by machine nameplate model and part numberPriority B (service part); suggested opening stock 1 pcCheck with the belts; inspect for looseness after work.
MERI-P13150 x 2 Belt PulleyConfirm by machine nameplate model and part numberPriority B (service part); suggested opening stock 1 pcCheck with the belts; inspect for looseness after work.
MERI-P32Belt Tensioner PulleyConfirm by machine nameplate model and part numberPriority A (wear part); suggested opening stock 2 pcsCheck belt tension before each use; adjust as belts wear.

Quality control

Checks from MERI maintenance notes

Check drive belt tension before each use and adjust it when it slackens.

After work, check moving parts and screws for looseness and tighten them.

Switch off and disconnect power before working on the drive.

Send the pulley size from the catalog name (for example 130 x 2) with the machine model.

Before you ask for a quote

What to send MERI with your order

Machine model from the nameplate, for example ME1000D-48.

MERI part number (MERI-Pxx) and quantity.

A photo of the old part and, if you have it, the engine model and serial number.

Destination country and port, or courier address.

A photo of the pulley on the machine.

Questions

FAQ

What do the pulley sizes mean?

The catalog names them 130 x 2, 120 x 3 and 150 x 2. Use these names with the MERI part number when you order.

Which pulley fits my mower?

The catalog does not tie each pulley to a model. Send the nameplate model and a photo, and MERI will confirm.

How many tensioner pulleys should I stock?

The MERI recommended package suggests 2 tensioner pulleys and 1 of each belt pulley per dealer location.

Should I change the pulley with the belt?

Inspect it every time. Replace it if it is worn or loose.

How fast does MERI ship these parts?

MERI dispatches its 46 common spare parts within 48 hours. Transit time depends on the destination and the shipping method you choose.

Keep reading

Related MERI pages

Spare parts quote or dealer stock advice

Send the models you support. MERI will match pulleys to each model and suggest a starting stock.

Need this part? Send the part number from the MERI spare parts catalog, your machine model and the serial number from the nameplate. We confirm the right part and reply within 24 hours.