Clutch parts
Clutch Assembly and Clutch Cable for Remote Mower Cutting Decks
The clutch connects engine power to the cutting deck. Most early clutch wear comes from how it is used, so train operators as well as stocking parts.
Fits: MERI remote mowers with a deck clutch. Confirm by machine nameplate model and part number.
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Summary
Short answer
MERI-P10 is the Complete Clutch Assembly. MERI-P16 is the Clutch Cable. Both are priority-B service parts. MERI suggests one clutch assembly and two cables per dealer.
MERI notes give one key rule: switch the clutch ON right after the engine starts. Leaving it OFF for long periods wears and deforms the clutch.
At a glance
Part numbers, fit and check points
| Part number | Part name | Fits | Dealer stock | Check points |
|---|---|---|---|---|
| MERI-P10 | Complete Clutch Assembly | Confirm by machine nameplate model and part number | Priority B (service part); suggested opening stock 1 pc | Switch the clutch ON right after starting. Prolonged OFF causes abrasion and permanent damage. |
| MERI-P16 | Clutch Cable | Confirm by machine nameplate model and part number | Priority B (service part); suggested opening stock 2 pcs | Check the cable moves freely and its fixings are tight after work. |
Clutch use from MERI maintenance notes
Switch the clutch to ON immediately after starting the engine.
Do not leave the clutch OFF for long periods. It causes abrasion, deformation and permanent damage.
After work, check moving parts and screws for looseness and tighten them.
MERI’s support video library includes a blade clutch start and stop demonstration on the videos page.
Before you ask for a quote
What to send MERI with your order
Machine model from the nameplate, for example ME1000D-48.
MERI part number (MERI-Pxx) and quantity.
A photo of the old part and, if you have it, the engine model and serial number.
Destination country and port, or courier address.
How the clutch fails: slips, will not engage, or noise.
Questions
FAQ
Why do clutches wear out early?
MERI notes point to leaving the clutch OFF for long periods after the engine starts. Switch it ON straight away.
Can I replace only the clutch cable?
Yes. MERI-P16 is sold on its own.
How many clutch parts should a dealer keep?
The MERI recommended package suggests 1 complete clutch assembly and 2 clutch cables per dealer location.
Does the clutch fit every MERI model?
The catalog does not tie the clutch to models. Send the nameplate model and MERI will confirm.
How fast does MERI ship these parts?
MERI dispatches its 46 common spare parts within 48 hours. Transit time depends on the destination and the shipping method you choose.
Keep reading
Related MERI pages
Spare parts quote or dealer stock advice
Send the models you support. MERI will confirm the clutch parts and suggest a starting stock.