Glossary

Remote Mower and Tracked Equipment Glossary

Short, plain meanings for the words you see on MERI spec sheets, quotes and shipping papers. Use it when you compare machines or train new sales staff.

Covers MERI mowers, forestry mulchers, sprayers, snow blowers and crawler tillers.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI tracked machines on the production and inspection line
MERI factory, production and inspection.
100+Countries exported
CECertified
ISO 9001Quality management
24 hReply time

Summary

Short answer

Most spec-sheet questions come down to a few terms: cutting system, cutting width, slope rating, remote range and drive voltage. Get those right and you can compare most tracked remote machines.

At a glance

Cutting and working terms

Terms used on MERI TDS and product pages, November 2026.
TermWhat it means
Flail mowerA rotor with many small swinging blades. It chops grass and brush and leaves it on the ground. Used on ME800, ME1000 and ME1200 models.
Hammer bladeA heavier flail tool for thicker growth. Offered on some mower builds instead of standard flail blades.
Flat blade (straight blade)Rotating flat blades that cut like a lawn mower. Used on T-Series turf mowers for a neater finish.
Cutting widthThe width of grass cut in one pass. MERI mowers range from 550 to 1200 mm.
Cutting heightHow high the grass is left. It can be set by hand, by electric lift or by hydraulic lift, depending on the model.
Fixed-tooth mulching headA forestry head with fixed teeth that grinds brush and small trees. Used on the ME-RFM1000 mulchers.
Work rateArea covered per hour, such as 3000–4000 m²/h. Real rates depend on vegetation, terrain and the operator.

At a glance

Drive and control terms

Terms used on MERI TDS and product pages, November 2026.
TermWhat it means
Rubber trackThe crawler belt the machine runs on. MERI catalogue sizes are 150 × 30 × 37 and 180 × 60 × 37.
Idler wheelA wheel that guides and tensions the track.
24 V / 48 V driveThe voltage of the electric travel motors. 48 V systems give more drive power for heavier work and steeper ground.
Travel motorThe electric motor that drives each track. Most MERI machines have two.
Generator / range extenderThe engine-driven generator that charges the battery while the machine works.
Remote rangeHow far the operator can stand from the machine and still control it. 800 m is standard on MERI mowers.
Emergency stopA button that stops the machine at once. MERI machines have one on the remote and one on the machine.
RTK navigationSatellite positioning with centimetre-level correction, used for guided driving on some MERI builds.

At a glance

Power and slope terms

Terms used on MERI TDS and product pages, November 2026.
TermWhat it means
Maximum slope (degrees)The steepest angle the machine is rated for, such as 45°. Degrees are not the same as percent grade.
Percent gradeRise divided by run, times 100. A 45° slope equals a 100% grade.
Single- / twin-cylinder engineTwin-cylinder engines give more power and run smoother. Single-cylinder engines are simpler and lighter.
LiFePO4 batteryLithium iron phosphate battery. Used in the electric ME-RFM1000-E mulcher (30 kWh).
Airblast sprayerA sprayer with a fan that blows the spray into tree or vine canopies.
Boom sprayerA sprayer with a bar of nozzles for low crops and rows.
Auger snow blowerA snow blower that feeds snow with a spiral auger and throws it to the side. The ME-RS throws 3–5 m.

At a glance

Buying and shipping terms

Common terms in MERI quotations and order papers.
TermWhat it means
TDSTechnical data sheet. One per model, with the official specifications.
MOQMinimum order quantity. At MERI: one unit for a sample, wholesale pricing from 5 units.
OEM / private labelA machine built by MERI and sold under your brand, with your logo, nameplate, manual and packaging.
FATFactory acceptance test. The checks run on your unit before it leaves the factory.
20GP / 40HQStandard 20-foot and 40-foot high-cube shipping containers.
CEThe European conformity marking. MERI machines are CE certified.

Questions

FAQ

Is a 45° slope the same as a 45% grade?

No. 45° equals a 100% grade. A 45% grade is about 24°.

What is the difference between flail and flat blades?

Flail blades swing on a rotor and chop rough growth. Flat blades spin like a lawn mower and give a neater cut on turf.

Does 48 V mean a faster machine?

Not by itself. 48 V gives the travel motors more power for heavy work and steep ground.

What does remote range mean in practice?

It is the distance at which the operator still has control. Hills, trees and buildings can shorten it on site.

Where do I find the official numbers?

In the model TDS. Each MERI product page links to its TDS.

Keep reading

Related MERI pages

Still have a question about a spec?

Send the model and the line on the spec sheet you want explained. We reply within 24 hours.