Wiring
Wiring Harness and Ignition Switch Wiring Set
A damaged harness can look like a failed controller or motor. Check the wiring first, then order the part.
Fits: MERI remote mowers. Confirm by machine nameplate model and part number.
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Summary
Short answer
MERI-P30 is the Wiring Harness. MERI-P42 is the Ignition Switch Wiring Set. Both are priority-C parts. MERI suggests one of each per dealer.
Many electrical faults are loose connections. The operator manual lists loose connecting parts as a cause of drive faults.
At a glance
Part numbers, fit and check points
| Part number | Part name | Fits | Dealer stock | Check points |
|---|---|---|---|---|
| MERI-P30 | Wiring Harness | Confirm by machine nameplate model and part number | Priority C (on demand); suggested opening stock 1 pc | Check the electrical connections before each use. Keep water out of the electrics. |
| MERI-P42 | Ignition Switch Wiring Set | Confirm by machine nameplate model and part number | Priority C (on demand); suggested opening stock 1 pc | Check the connections when the engine will not start from the switch. |
Quality control
Electrical checks from the operator manual

- Check the electrical circuit connections before each use.
- Keep the electrics out of rain and wet conditions; water raises the risk of electric shock.
- Switch off and remove the battery connection before working on wiring.
- Clean dust and dirt from the machine, but do not use gasoline or solvents on parts.
Before you ask for a quote
What to send MERI with your order
Machine model from the nameplate, for example ME1000D-48.
MERI part number (MERI-Pxx) and quantity.
A photo of the old part and, if you have it, the engine model and serial number.
Destination country and port, or courier address.
A photo of the control box and the damaged section.
Questions
FAQ
How do I know it is the harness and not the controller?
Check for loose plugs and damaged wires first. The operator manual lists loose connecting parts as a common cause of drive faults. MERI can help from photos.
What is the ignition switch wiring set?
MERI-P42 is the wiring set for the ignition switch, listed separately from the main harness.
How many should a dealer keep?
The MERI recommended package suggests 1 wiring harness and 1 ignition switch wiring set per dealer location.
Does the harness fit all MERI models?
The catalog does not tie it to models. Send the nameplate model and MERI will confirm.
How fast does MERI ship these parts?
MERI dispatches its 46 common spare parts within 48 hours. Transit time depends on the destination and the shipping method you choose.
Keep reading
Related MERI pages
Spare parts quote or dealer stock advice
Send the models you support. MERI will confirm wiring parts and suggest a starting stock.