ME800-24 for Development Plots: Vacant Land, Show Homes and Phased Sites — remote control lawn mower article

Short answer: Developers use the ME800-24 to keep vacant plots, future phases and new landscape banks cut between construction stages. The product page lists an 800 mm flail deck, 30–300 mm cutting height, 45° slope rating and 355 kg weight. Walk each plot first: building sites hide debris.

Grass on a development site

A large housing or commercial development is built in phases. While one phase is under construction, the next sits as rough grass and the last may be handed over with new banks and open space. Planning conditions, sales teams and neighbours all expect the grass to look cared for.

The ground is uneven, with spoil heaps, steep attenuation basins and new bunds. A remote tracked flail mower handles this without putting staff on the slopes.

ME800-24 product page figures

ItemProduct page figure
EngineLONCIN 459 gasoline, 18 HP
Cutting width800 mm
Control system24 V
Electric power1,800 W
Blades30 (flail)
Cutting height30–300 mm (adjustable)
Max slope45°
Remote range800 m
Travel speed0–5 km/h
Fuel tank5.5 L
Weight355 kg
Dimensions (L×W×H)1650×950×920 mm
Listed working efficiency4,000 m²/hour

Data from the live MERI product page. Confirm the order configuration with MERI before you buy.

Why a flail mower suits vacant plots

Vacant plots are often cut only a few times a year, so the grass is long and mixed with weeds. A flail deck chops it small and drops it. The 30–300 mm range lets you take a high first cut and then lower it on later visits.

The ME800-24 is light at 355 kg and 950 mm wide, so it travels on a small trailer and moves between plots on site roads.

MERI ME800-24 gasoline remote control flail mower, cutting deck side view
MERI ME800-24 cutting deck side view. The adjustable flail deck handles long grass on vacant plots.
MERI video: an ME800 series custom build.

Walk the plot first

  • Look for rebar, timber offcuts, pallets, wire, pipes and bricks in the grass.
  • Mark manholes, service covers and survey pegs.
  • Flag soft ground near drainage runs and basins.
  • Check that the site manager has cleared the area for mowing that day.
  • Keep clear of active work zones, plant and deliveries.

Building debris is the main cause of blade damage on development sites. Ten minutes of walking saves a damaged rotor.

Sales areas and show homes

Grass near the sales office and show homes needs a neater finish. Cut these areas more often at a lower setting and keep the rough phases on a slower cycle. Mow show-home areas early, before visitors arrive, and keep the machine away from parked cars.

Planning conditions and handover

Many sites have landscape banks and open space that must be maintained until the management company takes over. Keep a dated log and photographs of each visit. That record helps at handover and if neighbours raise a complaint.

Common mistakes on building sites

  • Skipping the walk-round and hitting rebar or pipe.
  • Mowing near active plant or a delivery route.
  • Cutting basin floors before they have drained.
  • Losing track of which plots were cut, with no log for the client.
  • Leaving the mower in an unsecured compound overnight.
  • Quoting a full round from the listed rate instead of the time logged on the first visit.

Moving between sites

Many developers have several sites in one region. A small trailer and one operator can cover them on a fixed weekly or monthly round. Plan the order so the busiest show-home sites are cut early in the week, and the rough plots later. Clean the deck between sites to avoid moving weed seeds around.

What to send MERI before ordering

  • The number of plots and their total area.
  • The steepest bank or basin angle.
  • Site road and gate widths.
  • How long the site will stay in phased construction.
  • Whether you need one machine per site or one for several sites.

MERI can then confirm whether the ME800-24 is enough or whether the 48 V model suits steeper banks, and suggest a blade and bolt kit for sites where debris is common.

A worked example

A phased site has 2.5 ha of vacant plots and 4,000 m² of new banks. That is 29,000 m² per round. The product page lists 4,000 m² per hour on open ground. Plots with debris and many turns will be slower, so plan about two days per round with one operator and log the real time. Compare the ME800-24 with the ME800-48 if your banks are long and steep.

Related MERI pages

Frequently asked questions

Will building debris damage the flail deck?

It can. Walk the plot and remove rebar, wire and timber first. Set a high cut on the first visit.

How heavy is the ME800-24?

The product page lists 355 kg, which suits small trailers and site roads.

Can it mow attenuation basin slopes?

Yes, on firm ground. The product page lists a 45° maximum slope. Stay off soft basin floors.

What engine does it use?

The product page lists a LONCIN 459 gasoline engine, 18 HP, with a 24 V control system.

Send us your site details

Tell us the job, area, slope and country. MERI replies within 24 hours.

Ask MERI

Need a mower recommendation for your terrain or project?

Get a Quote
Get a Quote