
Short answer: Short, regularly cut grass around livestock houses gives rodents less cover, keeps drains and fences visible and makes the site easier to inspect. Steep drainage banks, attenuation ponds and fence lines are the slow parts. A remote flail mower can handle those while staff stay on firm ground, as long as machine cleaning between sites is part of the routine.
Why perimeter grass matters on livestock units
Farm press and extension advisers often link long grass around livestock buildings with more rodent cover and harder inspections. Many integrators and farm assurance schemes also set expectations for the area around the houses. Check your own scheme’s wording; this article covers the mowing work, not the rules.
The practical goal is simple: a clear, short strip around each building, visible fence lines and drains that can be checked at a glance.
The awkward areas
- Drainage banks and swales between houses.
- Attenuation ponds and dirty-water lagoon banks.
- Fence lines and the strip outside the security fence.
- Banks around feed bins, gas tanks and generator pads.
- Rough ground at the far end of the site that only gets cut twice a year.
Flat lawns between houses are quick with a ride-on. The banks and fence lines take the hand hours.
Suggested mowing pattern
| Zone | Target | Typical frequency in the growing season |
|---|---|---|
| Strip next to the houses | Short and even | Every 1–2 weeks |
| Drainage banks and swales | Short enough to see the channel | Every 2–4 weeks |
| Fence lines | Clear base of fence | Every 2–4 weeks |
| Pond and lagoon banks | Controlled height, visible edge | Monthly or as required |
| Outer rough ground | Topped before seeding | 2–4 times a year |
A starting plan. Adjust to growth rate, site rules and your own inspection routine.
Where a remote mower fits
A tracked remote mower lets one person cut the banks and pond edges without standing on them. MERI tracked models are rated to 45°, and the flail models cut 800–1,200 mm wide with a cutting height range of 30–300 mm. That range covers both a short strip and a first cut of long rough grass.
Standard remote range is 800 m, with an optional R1 controller up to 1,000 m. In practice, keep the machine in clear view, especially near pond edges and fences. If the radio signal is lost, the machine stops.

Hygiene between sites
Contractors moving between units should treat the mower like any other piece of kit that travels from farm to farm. Agree the routine with each client before the first visit.
- Brush off clippings and soil before leaving the site.
- Wash tracks and deck in the area the farm provides, away from electrics and the controller.
- Let the machine dry before storage to protect bearings and connectors.
- Keep a simple log of site, date and cleaning for each visit.
Time and staffing
On many units the perimeter is cut by whoever has a spare hour, which is why it slips in busy weeks. A fixed slot works better. Measure the banks and fence lines once, time the first full round, and book that time into the weekly or fortnightly plan. A remote mower lets one person do the banks safely, so the job does not wait for a second worker.
If a contractor does the work, put the zones, heights and cleaning routine into the agreement. That avoids debate about what counts as done.
Small details that save time
- Keep a set of cones or markers for inspection covers and cables.
- Mow the fence line before the bank, so the edge is visible.
- Lift the deck near feed bin bases and pipework.
- Finish around posts and gates with hand tools last.
Planning the first visit
Walk the whole perimeter first. Mark drains, inspection covers, cables and any buried pipes. Note soft ground near ponds. Time how long the first bank takes, then use that number to plan the rest of the season. The first cut on overgrown ground is always the slowest.
Related MERI pages
- Cutting height by model
- Slope ratings by model
- ME1200-48 remote flail mower
- Machine hygiene between mowing sites
- Mowing stormwater pond banks
Frequently asked questions
Why keep grass short around poultry houses?
Short grass gives rodents less cover and makes fences, drains and the building edge easier to inspect. Check your own scheme for any specific requirement.
Can a remote mower cut lagoon and pond banks?
Yes, on banks within its rating and with firm footing. MERI tracked models are rated to 45°. Keep the machine in view near water.
How should a contractor clean the mower between farms?
Remove clippings and soil, wash tracks and deck in the area the farm provides, keep water away from electrics and log each visit.
What cutting height range do MERI flail mowers offer?
MERI flail models have a cutting height range of 30–300 mm and cut 800–1,200 mm wide, depending on model.
Send us your site details
Tell us the job, area, slope and country. MERI replies within 24 hours.
Need a mower recommendation for your terrain or project?
Get a Quote