25 hp water-cooled diesel power
Forestry Mulcher
ME-RFM1000-D Remote Control Forestry Mulcher
ME-RFM1000-D pairs a 1000 mm forestry working head with water-cooled diesel power and remote hydraulic adjustment. Review the 25 hp configuration, 500 m published control range, cutting tools and transport plan against the model TDS.
Technical Specifications
| Power system | 1105 single-cylinder water-cooled diesel |
|---|---|
| Working width | 1000 mm |
| Rated power | 25 hp |
| Maximum slope | 45° |
| Remote control range | 500 m |
| Travel speed | Configuration dependent |
| Net weight | 550–600 kg net |
| Machine dimensions | 1950 × 1250 × 870 mm |
ME-RFM1000-D recorded working test
Watch the matched MERI recording alongside the technical specifications. The video shows this identified machine and its recorded conditions; the supplied configuration remains the one confirmed in the quotation and model sheet.
Built for demanding sites
Key Features
1000 mm fixed-tooth mulching head
Remote hydraulic cutting-height adjustment
500 m remote control range
45° maximum slope capability
Up to 30 cm branch capability under suitable conditions
Match the mulcher to your vegetation and terrain
Share your vegetation type, slope, access width and preferred power system. MERI will confirm the suitable configuration and shipping details.
Discuss Your ProjectPlan your order · ME-RFM1000-D
From machine selection to a complete working package
Bring together the configuration, site requirements and delivery plan before requesting your quotation.
Confirm the working-head package
The diesel TDS describes a 1000 mm forestry working system with remote hydraulic adjustment. Horseshoe / toothed blade options and an alternative flail assembly need an order-specific equipment list. Confirm which head, tools and replacement parts are included before production.
Read the official ME-RFM1000-D TDSPrepare a land-clearing brief
Send representative stem diameters, vegetation density, slope direction and access measurements. Include refuelling, maintenance, transport and recovery arrangements for the intended workday.
Review vegetation and tool selectionAgree the delivery and support scope
State the destination, quantity, unloading equipment and local service plan. Request the final packing list, acceptance checks, spare-parts package and written commercial terms for the selected configuration.
Packaging and loading checklistFactory acceptance review
Recorded MERI demonstration
ME-RFM1000-D dense-vegetation demonstration
Follow the recorded start-up and initial clearing sequence. Use the actual vegetation and ground conditions shown when discussing a comparable test with MERI.
Compare and choose
Verify MERI before you buy
Review service coverage, document scope and real export-delivery evidence for the selected configuration.
See the ME-RFM1000-D on a live video call from our factory: start-up, remote control, mulching head, safety stops and build quality.
Frequently asked questions
What is the ME-RFM1000-D used for?
It is a remote-controlled forestry mulcher with a 1000 mm working width, built for brush, scrub and land clearing that is heavier than flail-mower work.
What engine does it use?
A 1105 single-cylinder water-cooled diesel engine rated at 25 hp.
How steep and how far can it work?
Its maximum operating slope is 45°. The remote control range is 500 m.
How big and heavy is it?
About 550–600 kg net, with dimensions of 1950 × 1250 × 870 mm. Plan your trailer and loading ramp for this weight.
What should I send for a quote?
Photos of the vegetation and typical stem diameter, your steepest slope, the narrowest access width and daily working hours. We reply within 24 hours.




