
Test the remote mower from approved operator positions that keep the machine in direct view. Map the metal buildings and doors that can block the direct view, then ask the supplier to verify the proposed route with the exact remote and receiver. MERI lists a standard 800 m remote range and up to 1,000 m with the optional R1. Use those figures for product comparison. The site trial determines whether the planned positions work around the actual structures.
Plan operator positions around the route
Walk the work zone with the person who controls access. Mark each stretch the operator can see and the places where a wall, parked vehicle or partly open door changes the view. Record locations the operator can occupy without being in a traffic lane or restricted zone. Measure the working distance from each permitted position to the farthest point the mower should reach while remaining visible.
Break the route into sections if the operator needs to move around a corner to maintain visibility. Identify where the mower can be stopped under the approved procedure while the operator changes position. If there is no permitted viewpoint for a section, record that as a route problem. Changing remotes alone will not create a suitable operating position. The MERI secure-site mowing solution describes the wider access and work-zone considerations. Share only the measurements and layout details the site permits you to disclose.
Define what the supplier should verify
| Route element | What to give the supplier | What to record during the check |
|---|---|---|
| Straight visible section | Distance and approved operating position | Whether commands respond as documented in the tested configuration |
| Building corner | Where the wall first affects the operator's view | The limit of the visible route and an approved next position |
| Door or loading area | Normal door position and when vehicles or equipment occupy the space | Whether the proposed route remains usable under representative conditions |
| Transfer between positions | Where the mower can be stopped and where the operator may move | How the operator resumes using the manufacturer-approved procedure |
| Controller configuration | Exact remote, receiver and model supplied | The configuration the result applies to and what must be rechecked if it changes |
Use the configuration in the quote for the site trial, or record any differences before work begins. Use the MERI buyer site data checklist to provide the proposed operating positions and obstructions. The MERI remote mower range provides configuration context, and the Wi-Fi and remote control guide explains the distinction between the local control link and internet access.
For an OEM order, use the MERI OEM mower configuration page to identify the controller options to discuss with the supplier. Ask which remote and receiver will be delivered before the supplier schedules a demonstration.

Request a controlled demonstration, not a range challenge
Have the supplier follow the delivered instructions and the site's approved work method. Keep the operator in the agreed position and the machine in view. Do not drive out of sight to discover where control stops. If the supplier needs to verify an interrupted-command response, ask for a separate documented demonstration under controlled conditions. Record the normal working route and the safety-function verification separately.
Recheck the portions where activity changes through the day. A bay that is empty during a site survey may later be occupied by a vehicle. Ask whether the route remains workable if a door or gate is in its normal position. Record the test conditions and any alternative that was needed. A pass applies to those conditions and the tested equipment configuration.
If some sections cannot be reached from approved positions, compare a shorter work section, another authorized viewpoint or a different way to maintain those strips. Request a revised demonstration after changing the layout. If the supplier proposes a different remote, ask them to explain what that changes and test the configuration the crew will receive.
Record whether the operator could identify which direction the machine was pointing throughout the check. A visible outline in a dark doorway may still be too hard to interpret from the intended position. Confirm how lighting changes at the hours when the site normally releases the route. If the same equipment will work in a second yard, retain the first test record and repeat the site check rather than carrying the result across by distance alone.
Buyer FAQ
Does the stated remote range apply through a metal building? Treat the published range as a product specification. Ask for verification from the permitted position on your site and keep the equipment in view.
Do I need to submit a full site map? Share what the site permits. Measured distances, obstruction descriptions and a redacted route sketch can be enough to start an equipment discussion.
What should I record if the route works only with the doors open? Record that condition and confirm whether the site can provide it during normal operation. Otherwise, verify another approved route or restrict the scope.
Need a mower recommendation for your terrain or project?
Get a Quote