Solutions · Orchard removal
Remote Forestry Mulchers for Orchard Removal and Prunings
When an old orchard comes out, or after heavy pruning, the wood has to go somewhere. Mulching it on site returns it to the soil and avoids burning. A remote mulcher works through the rows with one operator.
ME-RFM1000 mulchers take branches up to 30 cm in diameter. Trunks larger than that should be cut and split first. Horseshoe or toothed blades are available on the ME-RFM1000-D.
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Sequence
A typical removal sequence
| Step | Job | Machine |
|---|---|---|
| 1 | Cut trees and remove trellis wire, posts and irrigation lines | Chainsaw crew / by hand |
| 2 | Cut trunks over 30 cm into pieces or remove them | Chainsaw crew |
| 3 | Mulch branches, prunings and small trunks in the rows | ME-RFM1000-D or ME-RFM1000-E |
| 4 | Second pass lower to finish the residue | ME-RFM1000 |
| 5 | Prepare soil for replanting | Tiller or local equipment |
Data
Mulcher figures for orchard work
| Item | ME-RFM1000-D | ME-RFM1000-E |
|---|---|---|
| Branches | Up to 30 cm | Up to 30 cm |
| Rotor speed | 3,000 r/min | 3,450 r/min |
| Blade options | Horseshoe / toothed | Not listed |
| Cutting height / lift | 5–400 mm | 0–400 mm |
| Run time | Continuous (refuel) | About 7 h per charge |
| Weight | 550–600 kg | 882 kg |
What it means for you
Before you start
Remove wire
Trellis wire wraps the rotor. Take it all out.
Size the wood
Cut anything thicker than 30 cm first.
Two passes
A first high pass and a second low pass leave finer mulch.
Check teeth daily
Old orchard wood can hide nails and stones.

Prunings
Annual prunings too
Many growers mulch prunings every winter instead of burning or hauling them. The same machine handles the rows each year, and the ME-RFM1000-E runs quietly near houses and packing sheds.
Questions
Frequently asked questions
Can it mulch whole orchard trees?
It mulches branches and small trunks up to 30 cm. Larger trunks need cutting first.
What blades suit orchard wood?
The ME-RFM1000-D offers horseshoe or toothed blades. Ask us which suits your wood and soil.
Will it damage the soil surface?
Set the cutting height above the ground. The ME-RFM1000-D adjusts from 5 to 400 mm.
Can it handle prunings each year?
Yes. Prunings are well within the 30 cm limit.
Is there an electric version?
Yes, the ME-RFM1000-E, with about 7 hours per charge.
Keep reading
Related MERI resources
Taking out an orchard?
Send the area, tree age and trunk size. We reply within 24 hours.