MERI video · Factory and field evidence

ME-RFM1000-D: Engine View and Tall-Grass Clearing Pass

See the diesel mulcher close up, then follow it from a wider view as it works along a strip of tall vegetation.

Request equipment and dealer information

What this video shows

This MERI recording identifies the ME-RFM1000-D and moves from engine-area and tracked-chassis views to vegetation clearing in the field. Later footage shows the machine working beside standing tall grass, with a worked strip behind it. The current model sheet lists a 25 hp water-cooled diesel engine and 1000 mm working width.

Key moments to watch

0:00 · Locate the diesel engine and carrier

The opening close view shows the red engine housing, surrounding machine body and track assembly in the field.

0:07 · Connect the close view with the complete machine

The view includes more of the carrier beside standing vegetation. Use it to identify the demonstrated build before moving to the wider working view.

0:18 · Review the tall-grass pass

The camera steps back to show the machine along the vegetation edge and the worked strip. The later view extends the context of the same recorded task.

ME-RFM1000-D model references and visible field evidence

Observed video details and model-specific purchasing checks.
ReferenceCurrent model or video informationHow to use it in an enquiry
Power system25 hp water-cooled diesel is the current model reference.Confirm the engine package on the proposed equipment list.
Working headThe current technical sheet lists 1000 mm working width.Compare the fitted machine and working route together.
Visible materialThe field sequence shows tall grass and overgrown vegetation.Send representative photographs and describe your dominant material.
Recorded resultA worked strip is visible beside standing vegetation.Specify the finish and the evidence needed for your own test.

Connect the machine close-up with the field task

The recording begins close to the diesel power unit and track assembly before showing the mulcher from farther away. That sequence gives a buyer more context than a distant clearing shot alone. The close view identifies the build being discussed, while the wider view places it beside the vegetation and the worked strip.

Use both kinds of view when requesting a demonstration. Ask for the machine identification and working head to appear in the record, then include an angle that shows the material and route. Keep those observations together so a field result is attached to the named configuration rather than transferred to another engine or cutting system.

Use the 25 hp and 1000 mm references accurately

The current ME-RFM1000-D technical sheet specifies water-cooled diesel power at 25 hp and a 1000 mm working width. These are model references, not measurements taken from the video. The product page below provides the formal sheet and the current configuration information for a technical enquiry.

Compare the complete machine envelope, transport arrangement and working head with the actual site. A working-width figure is useful for discussing the cutting system, but it does not establish gate clearance or turning space. Send the narrowest access and the proposed route as separate inputs, together with the vegetation photographs and required working pattern.

Keep the tall-grass result separate from woody-material capability

The visible field task is tall grass and overgrowth. The clip does not show a measured tree diameter or a documented woody-material test. Use the standing vegetation and worked strip to discuss this grass-clearing demonstration, rather than assigning a branch capacity from the name forestry mulcher.

For your own purchase review, identify whether the main job is grass, recurring mixed growth or woody reclamation. Photograph the representative material and record its dimensions where relevant. Ask for a demonstration and technical references that match that job. The linked diesel-model guide explains the wider product context, while this page remains a record of the visible sequence. Include working area, terrain, access, daily work requirement, quantity and destination with the enquiry.

Frequently asked questions

What published model figures are used on this page?

The current ME-RFM1000-D sheet lists a 25 hp water-cooled diesel engine and 1000 mm working width. They are model references, not values measured in the video.

Does this clip prove a tree-cutting diameter?

The visible work is grass and overgrowth. No measured tree-cutting test is shown in this sequence.

Can I calculate production from the worked strip?

The recording does not document measured strip dimensions and a complete timed work cycle. Request a matching test record for any output comparison.

Match the diesel mulcher to the material

Send vegetation photographs and representative dimensions, terrain, narrowest access, working area, daily target, quantity and destination. Ask for the appropriate ME-RFM1000-D configuration and demonstration record.

Get a model-specific quotation