MERI video · Factory and field evidence

100 L RCS Sprayer in a Trellised Vegetable Corridor

Follow the compact sprayer through a crop corridor bordered by tall leaves and trellis supports.

Request equipment and dealer information

What this video shows

The MERI source identifies a 100 L remote-control vegetable sprayer. In the recording, the carrier travels along a narrow soil corridor between tall crops and their support poles, with visible mist near the machine. The current RCS100 series reference is a 100 L tank and 400 mm chassis width; the footage itself does not measure the available clearance.

Key moments to watch

0:00 · Read the corridor before the close approach

The opening looks along the soil passage between trellised crops. The machine is farther down the corridor, so the planting and support layout are visible together.

0:04 · Follow the carrier within the planted route

The sprayer is closer to the camera, with leaves and support poles bordering the travel line. Use those details to describe the route restrictions.

0:07 · Review the near-machine view

The later view shows the carrier more clearly in the passage and visible mist near the crops. It does not reveal a complete dimensioned nozzle or fan assembly.

RCS100 references and trellised-row observations

Observed video details and model-specific purchasing checks.
ReferenceWhat is published or visibleWhat to check for your crop
Capacity classThe source identifies a 100 L sprayer.Compare the required liquid cycle with refill access.
Chassis referenceCurrent RCS100 information lists a 400 mm chassis width.Request the complete fitted outside dimensions.
Crop corridorTall leaves and trellis supports border the soil passage.Measure clear space at track, body and working-equipment height.
Visible operationThe carrier travels along the row with visible mist nearby.Confirm the supplied spray system and approved calibration plan.

Look above the track path as well as along it

The narrow strip of soil is only one part of the passage in this recording. Leaves and support poles occupy the space beside and above the carrier. The changing camera distance helps show why a route photograph should include the crop structure, rather than just the ground between the rows.

For a similar farm enquiry, record the tightest clear opening at the heights the machine and working assembly will occupy. Include leaning poles, irrigation fittings and leaves that extend into the route. Check the entrance and the row end as well as the straight section. A carrier that can travel along one open stretch may still need a different exit or turning arrangement.

Use the 100 L class without confusing chassis and clearance

The source names the 100 L class, and the current RCS100 series information lists a 400 mm chassis. Those figures support an initial comparison, but they do not provide the outside dimensions of every fitted sprayer. Confirm the tank, body and selected working assembly as one equipment package.

The capacity-and-chassis guide below explains how to compare the supporting undercarriage with the complete operating envelope. Use a drawing or measured description of the proposed build when the crop corridor is tight. After access is established, compare the application requirement and refill location with the tank class instead of choosing capacity before confirming the route.

Identify the spray hardware before planning the treatment

Visible mist does not show the complete nozzle arrangement or establish a treatment rate. This camera view is also not enough to assign a standard boom or airblast package to every 100 L machine. Ask for the actual working-system description and the fitted nozzle information for the unit being quoted.

Use the farm’s approved application and calibration procedure for the crop and equipment. The daily-inspection guide below gives related checks for the machine, lines and spray components. Keep those records with the configuration and route information so a useful travel demonstration is not treated as a complete crop-protection trial. Send crop photographs, passage and headland measurements, target structure, refill plan, quantity and destination for the next discussion.

Frequently asked questions

Does the 400 mm chassis figure prove passage through a 400 mm crop gap?

The chassis dimension is not the complete fitted outside envelope or a clearance allowance. Request the actual build dimensions and compare the whole route.

Is the spray configuration fully identifiable in the clip?

The camera does not show a complete dimensioned boom, fan or nozzle layout. Confirm the supplied working assembly with MERI.

Does the visible mist establish application rate?

The recording does not show measured nozzle output or crop deposits. Use the approved calibration and application procedure for the fitted system.

Check the trellised route with the fitted sprayer

Send crop and support-layout photographs, the smallest clear passage at relevant heights, row-end space, target application, refill plan, quantity and destination. Request the matched 100 L RCS configuration.

Get a model-specific quotation