Model and application guide

ME-RFM1000-E for Urban Woodland and Park Scrub

Scrub and understory in town woodland, parks and green corridors often sit next to homes, schools and paths. The ME-RFM1000-E is a battery-electric forestry mulcher, so it works without exhaust at the work site.

Best fit: councils and contractors clearing scrub, bramble and understory in urban woodland, parks and green corridors where fuel and exhaust are a concern.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI battery-electric tracked forestry mulcher clearing dense brush
MERI electric forestry mulcher in dense brush
1000 mmME-RFM1000-E working width
30 kWh72 V LiFePO4 battery system
9 kWWater-cooled cutter motor
About 7 hWork time per charge (TDS)
882 kgNet weight
200 mRemote range

Summary

Short answer

Choose the ME-RFM1000-E where scrub must be cleared near people and buildings and a diesel machine is not wanted. It has a 1000 mm fixed-tooth head, a 9 kW cutter motor and a 30 kWh LiFePO4 battery.

The TDS lists about 7 hours of work per charge; real time depends on cutting load and terrain. Charging takes about 6 hours on fast charging or 12 hours on standard charging, so plan it around the working day. At 882 kg it needs a suitable trailer.

Fit check

Will the ME-RFM1000-E suit your site?

ME-RFM1000-E figures from the MERI product page and ME-RFM1000-E TDS. Site checks are guidance; confirm with MERI before ordering.
Site checkME-RFM1000-E figureWhat to measure
Access route1250 mm overall widthNarrowest gate, path or gap between trees on the route to the work area.
Slope45° climbing / 35° workingPlan cutting work within 35°. Check the steepest section and ground condition.
Vegetation1000 mm fixed-tooth headScrub, bramble and understory type and density at cutting time.
Work dayAbout 7 h per charge (TDS)Planned hours per day. Dense growth and slopes use more energy.
ChargingAbout 6 h fast / 12 h standardWhere the machine is charged overnight and what power supply is available there.
Transport882 kg net, 2080 × 1250 × 640 mmTrailer payload, ramp and tie-down points; unloading space near the site.

Why this model

Why the ME-RFM1000-E suits urban scrub clearing

MERI ME-RFM1000-E on a vegetated slope during a recorded railway test
ME-RFM1000-E on a vegetated slope in a recorded MERI test.
  • No exhaust at the site. Battery-electric drive and cutter.
  • Large battery. 72 V, 430 Ah, 30 kWh LiFePO4.
  • Cutter power. 9,000 W water-cooled motor with a 1000 mm fixed-tooth head.
  • Low body. 640 mm high, for work under low branches.
  • Operator at a distance. Remote range 200 m; travel speed 1 m/s.
  • Slope capability. 45° climbing, 35° working angle.

Other MERI options

ME-RFM1000-E vs ME-RFM1000-D vs ME1000-48

Choose by fuel and exhaust limits, vegetation size and how far the operator must stand.

Figures from the MERI product pages and model TDS.
PointME-RFM1000-EME-RFM1000-DME1000-48
TypeForestry mulcher, battery-electricForestry mulcher, dieselFlail mower, gasoline
Working width1000 mm1000 mm1000 mm
Power30 kWh battery, 9 kW cutter motor25 hp water-cooled dieselLONCIN 459, 18 hp
Weight882 kg net550–600 kg net424 kg
Overall size (L × W × H)2080 × 1250 × 640 mm1950 × 1250 × 870 mm1750 × 1150 × 920 mm
Remote range200 m500 m800 m
Best urban useScrub near homes and pathsRemote sites, heavy clearingGrass verges and banks

Limits

Where the ME-RFM1000-E is not the right choice

No charging point near the site.

If the machine cannot return to power each night, the diesel ME-RFM1000-D is easier to run.

Grass-only work.

For grass verges and banks a flail mower such as the ME1000-48 is lighter and faster.

Light trailers.

At 882 kg net it needs a trailer rated for the load. Check this before ordering.

Before you ask for a quote

What to send MERI

Vegetation type, density and area.

Steepest slope and narrowest access route.

Daily hours and where the machine will be charged.

Units per year and destination port.

Questions

FAQ

How long does the ME-RFM1000-E work on one charge?

The TDS lists about 7 hours of operation. Work time depends on cutting load, terrain and conditions, so plan from a test day on your own site.

How long does charging take?

About 6 hours with fast charging or 12 hours with standard charging. Tell us your shift pattern and the power supply at the depot and we will advise.

How do we transport an 882 kg machine?

Use a trailer rated for the net weight of 882 kg and the size of 2080 × 1250 × 640 mm, with a suitable ramp and tie-down points.

What slope can it work on?

The TDS lists 45° maximum climbing and 35° maximum working angle. Plan cutting work within 35°.

How fast can MERI ship?

One to ten units leave about 7 days after payment. Larger orders take 7–15 days. The 46 most-used spare-part types ship within 48 hours.

Keep reading

Related MERI pages

Send your site details for an ME-RFM1000-E quote

Tell us vegetation, slope, daily hours, charging access and units. We reply within 24 hours.