Model and application guide
ME800D-48 for Railway Embankments and Cess Strips
Railway lineside work means narrow access points, steep cuttings and strict rules on where people can stand. The ME800D-48 is the narrowest MERI diesel flail mower at 950 mm overall, with 48 V drive for steep faces.
Best fit: lineside contractors mowing embankments, cuttings and cess strips where access is narrow and the operator must stay away from the slope.
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Summary
Short answer
Choose the ME800D-48 when access to the embankment is narrow and the faces are steep. At 950 mm overall width it fits gaps that a 1150 or 1350 mm machine cannot pass, and the 48 V, 2,000 W drive gives pulling power on steep cuttings.
Diesel suits contractors who already run diesel fleets and long possessions. Work must follow the rail operator’s safety rules; the 800 m remote range lets the operator stand where those rules allow.
Fit check
Will the ME800D-48 suit your lineside work?
| Site check | ME800D-48 figure | What to measure |
|---|---|---|
| Access points | 950 mm overall width | Narrowest gate, stile, fence gap or walkway on the route to the slope. |
| Slope | 45° rated maximum | Steepest cutting or embankment face and any loose ballast or wet ground. |
| Transport | 402 kg, 1750 mm long | Trailer payload and a safe unloading point at the access gate. |
| Vegetation | 30 flail blades, 30–300 mm height | Grass, weeds and light scrub at cutting time. Woody growth needs a mulcher. |
| Output per shift | Up to 4,000 m²/h rated | Slope area per possession or work window. Real output is lower on broken ground. |
| Operator position | 800 m remote range | A permitted standing position with a clear view of the machine. |
Why this model
Why the ME800D-48 suits railway slopes

- Narrowest diesel flail model. 950 mm overall width.
- 48 V drive. 2,000 W electric track drive for steep faces.
- Diesel power. KOOP 192, 12 hp, 5.5 L fuel tank.
- Flail cutting. 30 flail blades, cutting height 30–300 mm.
- Rated output. Up to 4,000 m² per hour on open slopes.
- Operator away from the slope. Remote range up to 800 m.
Other MERI options
ME800D-48 vs ME800D-24 vs ME1000D-48 on railway slopes
Choose by the narrowest access point, slope steepness and area per work window.
| Point | ME800D-48 | ME800D-24 | ME1000D-48 |
|---|---|---|---|
| Cutting width | 800 mm | 800 mm | 1000 mm |
| Rated work rate | Up to 4,000 m²/h | Up to 4,000 m²/h | Up to 5,000 m²/h |
| Overall size (L × W × H) | 1750 × 950 × 920 mm | 1650 × 950 × 920 mm | 1750 × 1150 × 920 mm |
| Weight | 402 kg | 355 kg | 424 kg |
| Drive system | 48 V, 2,000 W | 24 V, 1,800 W | 48 V, 2,000 W |
| Engine | KOOP 192 diesel, 12 hp | KOOP 192 diesel, 12 hp | KOOP 195 diesel, 15 hp |
| Best lineside use | Narrow access, steep faces | Narrow access, gentler slopes | Wider access, larger areas |
Limits
Where the ME800D-48 is not the right choice
Woody scrub and saplings.
Established scrub on cuttings needs a forestry mulcher such as the ME-RFM1000-D or ME-RFM1000-E.
Large open embankments.
Where access allows, the ME1000D-48 covers more width per pass.
Ballast and track area.
It is a vegetation mower for slopes and cess strips, not for work on the track or ballast.
Before you ask for a quote
What to send MERI
Narrowest access point and route to the slope.
Steepest face and ground condition.
Vegetation type and area per work window.
Units per year and destination port.
Questions
FAQ
Can the ME800D-48 work on steep railway cuttings?
It is rated for slopes up to 45° under suitable conditions. Check loose ground first and follow the rail operator’s rules for lineside work.
How narrow an access point can it pass?
The machine is 950 mm wide overall. Measure the narrowest gate, stile or walkway and leave a margin.
ME800D-48 or ME800D-24?
Both have the same 800 mm deck and 12 hp diesel. The ME800D-48 has 48 V, 2,000 W drive and weighs 402 kg; the ME800D-24 has 24 V, 1,800 W drive and weighs 355 kg. Choose 48 V for steep faces.
Where does the operator stand?
The remote range is up to 800 m. The operator stands where the rail operator’s safety rules allow, with a clear view of the machine.
How fast can MERI ship?
One to ten units leave about 7 days after payment. Larger orders take 7–15 days. The 46 most-used spare-part types ship within 48 hours.
Keep reading
Related MERI pages
Send your access details for an ME800D-48 quote
Tell us the narrowest access point, steepest face, area and units. We reply within 24 hours.