Model and application guide

ME1000D-48 for Highway Embankments: Diesel Remote Mowing

Highway cuttings and embankments mix steep faces, drainage channels and narrow access from service roads. The ME1000D-48 pairs a 1000 mm flail deck with diesel power and 48V drive for this work.

Best fit: road contractors mowing cut and fill slopes, interchange banks and verges on long working days.

  • CE Certified
  • ISO 9001
  • Exported to 100+ countries
  • Reply within 24 hours
MERI tracked remote mower cutting grass on a steep slope
MERI tracked mower on a grassy slope
1000 mmME1000D-48 cutting width
5,000 m²/hRated work rate, up to
15 hpKOOP 195 diesel engine
1150 mmOverall machine width
424 kgMachine weight
45°Rated maximum slope

Summary

Short answer

Choose the ME1000D-48 when the embankment is steep and access is limited. It is 200 mm narrower overall than the ME1200D-48, so it fits more service gates and verge strips, and still covers up to 5,000 m² per hour.

Diesel suits contractors who already run diesel fleets and long shifts. The 48V drive (2,000 W) gives more pulling power on steep faces than the 24V ME1000D-24.

Fit check

Will the ME1000D-48 suit your embankment?

ME1000D-48 figures from the MERI product page and ME1000D-48 TDS. Site checks are guidance; follow local traffic management rules.
Site checkME1000D-48 figureWhat to measure
Slope45° rated maximumSteepest cut or fill face and any loose or eroded ground.
Access width1150 mm overall widthNarrowest service gate, verge strip or guardrail gap on the route.
Transport424 kg, 1750 mm longTrailer payload and a safe unloading point off the carriageway.
Vegetation40 flail blades, 30–300 mm heightGrass height, weeds and scrub at cutting time.
Daily outputUp to 5,000 m²/h ratedSlope area per closure. Real output is lower with drains and signs to work around.
Operator position800 m remote rangeA protected standing point with a clear view, away from live traffic.

Why this model

Why the ME1000D-48 suits highway slopes

MERI tracked remote mower cutting a grass verge beside a paved road
Verges and drains beside roads need a narrow machine and a safe operator position.
  • Balanced width. 1000 mm cut, 1150 mm overall width.
  • Rated output. Up to 5,000 m² per hour on open slopes.
  • Diesel for long shifts. KOOP 195, 15 hp, 5.5 L fuel tank.
  • 48V drive. 2,000 W electric track drive for steep faces.
  • Operator away from the slope. Remote range up to 800 m.
  • Cutting height. 30–300 mm, adjustable for sight lines and verge rules.

Other MERI options

ME1000D-48 vs ME1200D-48 vs ME800D-48 on highway slopes

Choose by access width, slope area per closure and how broken the slope is.

Figures from the MERI product pages and model TDS.
PointME1000D-48ME1200D-48ME800D-48
Cutting width1000 mm1200 mm800 mm
Rated work rateUp to 5,000 m²/hUp to 6,000 m²/hUp to 4,000 m²/h
Overall size (L × W × H)1750 × 1150 × 920 mm1750 × 1350 × 920 mm1750 × 950 × 920 mm
Weight424 kg445 kg402 kg
EngineKOOP 195 diesel, 15 hpKOOP 195 diesel, 15 hpKOOP 192 diesel, 12 hp
Best highway useMixed slopes, limited accessLong open embankmentsNarrow strips, drains, guardrails

Limits

Where the ME1000D-48 is not the right choice

Very narrow strips.

Behind guardrails or along drains narrower than its 1150 mm body plus margin, use the 950 mm wide ME800D-48.

Long open embankments.

Where access allows, the ME1200D-48 covers 20% more width per pass.

Woody scrub and saplings.

Heavy woody growth needs a forestry mulcher such as the ME-RFM1000-D.

Before you ask for a quote

What to send MERI

Slope area and steepest face per section.

Narrowest access point from the road.

Vegetation type and cutting season.

Units per year and destination port.

Questions

FAQ

Can the ME1000D-48 mow steep highway cuttings?

It is rated for slopes up to 45° under suitable conditions. Check loose or eroded ground first, and follow the road authority’s traffic management rules.

How much embankment can it cover per shift?

The rated maximum is 5,000 m² per hour on open ground. Drains, signs and short sections reduce this, so plan from a test shift.

ME1000D-48 or ME1200D-48?

The ME1200D-48 cuts 1200 mm and is 1350 mm wide. The ME1000D-48 cuts 1000 mm and is 1150 mm wide, so it fits more gates and strips. Choose by your narrowest access point.

Where does the operator stand?

The remote range is up to 800 m. Choose a protected position with a clear view of the machine, away from live traffic.

What is the minimum order?

One unit for a sample. Wholesale pricing starts from 5 units.

Keep reading

Related MERI pages

Send your slope details for an ME1000D-48 quote

Tell us slope area, steepest face, access width and units. We reply within 24 hours.