Model and application guide
ME550-T for Vineyards: Narrow-Row Remote Mowing
The ME550-T is the narrowest mower in the MERI range. It cuts 550 mm with two flat blades and stands only 500 mm high, so it can work inter-rows and low trellis zones that wider flail mowers cannot reach.
Best fit: maintained cover crop and grass in narrow vineyard rows, terraces and short headlands.
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Summary
Short answer
Choose the ME550-T when your rows are too narrow for an 800 mm flail mower and the cover crop is kept short. The deck cuts 550 mm, but the machine is 1000 mm wide overall. That 1000 mm, not the cut width, decides whether it fits your rows.
Its 500 mm height lets it pass under low cordon wires and leaves, where a 920 mm high flail mower would catch. At 160 kg it fits on a light trailer and moves easily between vineyard blocks.
Fit check
Will the ME550-T fit your vineyard?
| Site check | ME550-T figure | What to measure |
|---|---|---|
| Row gap | 1000 mm overall width | Narrowest clear gap between posts or trunks at track height. Leave a safety margin on both sides. |
| Low wires and canopy | 500 mm machine height | Height of the lowest wire, cordon or hanging canes in the row. |
| Headland turn | 1100 mm machine length | Turning space at the row end, between the last post and the headland edge. |
| Slope | 45° rated maximum | Steepest cross-slope and up-slope on the terraces. Work across slopes only where the operator can see the machine. |
| Cover crop | 20–200 mm cutting height, 2 flat blades | Height and stem type at cutting time. Flat blades suit maintained grass, not woody growth. |
| Transport | 160 kg | Trailer payload and ramp width between blocks. |
Why this model
Why the ME550-T suits vineyard rows

- Narrowest MERI deck. 550 mm cut, 100 mm narrower than the ME650-T.
- Low body. 500 mm high, against 920 mm for MERI flail mowers.
- Light to move. 160 kg, the lightest MERI mower.
- Tidy finish. Two flat blades, cutting height 20–200 mm.
- Remote from the headland. Remote range up to 800 m; the operator stays off steep terraces.
- Gasoline power. LONCIN 224 engine, 7.5 hp, 5.5 L fuel tank.
Other MERI options
ME550-T vs ME650-T vs ME800-48 in a vineyard
If the rows are wider or the growth is rougher, a different MERI model may be the better choice.
| Point | ME550-T | ME650-T | ME800-48 |
|---|---|---|---|
| Cutting width | 550 mm | 650 mm | 800 mm |
| Overall size (L × W × H) | 1100 × 1000 × 500 mm | Wider than ME550-T; confirm with MERI | 1750 × 950 × 920 mm |
| Weight | 160 kg | 200 kg | 402 kg |
| Cutting system | 2 flat blades | 2 flat blades | 30 flail blades |
| Cutting height | 20–200 mm | 20–200 mm | 30–300 mm |
| Engine | LONCIN 224, 7.5 hp | LONCIN 224, 7.5 hp | LONCIN 459, 18 hp |
| Best vineyard use | Narrow rows, low wires | Rows with a little more room | Steep headland banks, rough growth |
Limits
Where the ME550-T is not the right choice
Woody or tall growth.
Flat blades are for maintained grass. For brambles or old cover crops, use a flail model such as the ME800-48.
Under-vine strip.
It mows the inter-row. It does not replace under-vine weeding tools at the trunk line.
Wide estates.
On long, open rows a wider deck covers more ground per pass. Compare the ME650-T or ME800-48.
Before you ask for a quote
What to send MERI
Narrowest row gap and lowest wire height.
Steepest slope and terrace layout.
Cover crop type and height at cutting time.
Units per year and destination port.
Questions
FAQ
Will the ME550-T fit between my vine rows?
The machine is 1000 mm wide overall, although it cuts 550 mm. Measure the narrowest gap between posts at track height and leave a safety margin on each side. Send us the figure and we will confirm.
Can it pass under the trellis wires?
The ME550-T is 500 mm high. If your lowest wire or cordon is clearly above that, it can pass under. Hanging canes may still need hand work.
Can it mow a steep terrace?
The ME550-T is rated for slopes up to 45° under suitable conditions. Check the steepest section and ground condition, and keep the operator in a safe place with a clear view.
Should I choose the ME550-T or the ME650-T?
The ME650-T cuts 100 mm wider, has a wider body and weighs 200 kg instead of 160 kg. Choose the ME550-T for the tightest spaces and the lightest machine.
What is the minimum order?
One unit for a sample. Wholesale pricing starts from 5 units.
Keep reading
Related MERI pages
Send your row width for an ME550-T quote
Tell us the narrowest row gap, lowest wire height and number of units. We reply within 24 hours.