Model and application guide
ME550-T for High-Density Apple Orchards: Low-Canopy Mowing
High-density apple blocks have narrow alleys and branches that hang low over the drive line. The ME550-T is 500 mm high and 1000 mm wide overall, so it can mow under canopies that stop a 920 mm high flail mower.
Best fit: maintained grass alleys in high-density and trellised apple orchards with low fruiting wood.
- CE Certified
- ISO 9001
- Exported to 100+ countries
- Reply within 24 hours

Summary
Short answer
Choose the ME550-T when the alley grass is mowed regularly and the lowest branches hang below about 1 m. At 500 mm high the machine works under fruiting wood, and its 1000 mm overall width fits most high-density alleys with a margin.
Flat blades leave an even finish on maintained grass. If the alleys are left long between visits, or the cover is rough and woody, a flail model such as the ME800-24 handles it better.
Fit check
Will the ME550-T fit your apple block?
| Site check | ME550-T figure | What to measure |
|---|---|---|
| Alley width | 1000 mm overall width | Narrowest clear gap between trunks, posts or irrigation at track height. Leave a margin on each side. |
| Lowest branches | 500 mm machine height | Height of the lowest fruiting wood over the drive line at harvest time, when branches hang lowest. |
| Row-end turn | 1100 mm machine length | Turning space between the last tree and the headland, fence or road. |
| Grass condition | 20–200 mm cutting height, 2 flat blades | Grass height between visits. Flat blades suit maintained grass, not long or woody growth. |
| Slope | 45° rated maximum | Steepest cross-slope in the block and any soft ground near drip lines. |
| Transport | 160 kg | Trailer or pickup payload for moving between blocks. |
Why this model
Why the ME550-T suits high-density apple rows

- Low body. 500 mm high, against 920 mm for MERI flail mowers.
- Narrow deck. 550 mm cut; 1000 mm overall width.
- Light machine. 160 kg, the lightest MERI mower, so it is easy to move between blocks.
- Even finish. Two flat blades, cutting height 20–200 mm.
- Operator outside the row. Remote range up to 800 m.
- Gasoline power. LONCIN 224 engine, 7.5 hp, 5.5 L fuel tank.
Other MERI options
ME550-T vs ME650-T vs ME800-24 in an apple orchard
Choose by branch height, alley width and how long the grass grows between visits.
| Point | ME550-T | ME650-T | ME800-24 |
|---|---|---|---|
| Cutting width | 550 mm | 650 mm | 800 mm |
| Overall size (L × W × H) | 1100 × 1000 × 500 mm | 1100 × 1000 × 500 mm | 1650 × 950 × 920 mm |
| Weight | 160 kg | 200 kg | 355 kg |
| Cutting system | 2 flat blades | 2 flat blades | 30 flail blades |
| Cutting height | 20–200 mm | 20–200 mm | 30–300 mm |
| Engine | LONCIN 224, 7.5 hp | LONCIN 224, 7.5 hp | LONCIN 459, 18 hp |
| Best apple orchard use | Low canopy, tight alleys | Low canopy, a little more width | Higher canopy, rough cover |
Limits
Where the ME550-T is not the right choice
Long or woody cover.
Flat blades are for maintained grass. For long growth or prunings left in the alley, use a flail model such as the ME800-24.
Tree-line strip.
It mows the alley. It does not replace herbicide or mechanical weeding in the tree-line strip.
Wide, high-canopy blocks.
Where branches are high and alleys are wide, a wider deck covers more ground per pass.
Before you ask for a quote
What to send MERI
Alley width at track height and tree spacing.
Lowest branch height at harvest.
Grass height between visits and slope.
Units per year and destination port.
Questions
FAQ
Will the ME550-T fit between my apple rows?
The machine is 1000 mm wide overall, although it cuts 550 mm. Measure the narrowest clear gap at track height and leave a margin on each side. Send us the figure and we will confirm.
Can it mow under low branches?
The ME550-T is 500 mm high. If the lowest branches over the drive line are clearly above that at harvest, it can pass under. Measure when the fruit load is heaviest.
Why flat blades and not a flail mower?
Flat blades give a short, even finish on regularly mowed grass, and the T-Series body is 500 mm high instead of 920 mm. For rough or long cover, a flail mower is the better tool.
ME550-T or ME650-T for apples?
Both have the same 1100 × 1000 × 500 mm body. The ME650-T cuts 100 mm wider and weighs 200 kg. Choose the ME550-T for the lightest machine and the tightest blocks.
What is the minimum order?
One unit for a sample. Wholesale pricing starts from 5 units.
Keep reading
Related MERI pages
Send your alley width for an ME550-T quote
Tell us the alley width, lowest branch height, slope and units. We reply within 24 hours.